VEVOR Ultrasonic Cleaner with Digital Timer & Heater, Professional Ultra Sonic Jewelry Cleaner, Stainless Steel Heated Cleaning Machine for Glasses Watch Rings Small Parts Circuit Board (3L)

Works great for for any project. Cleaned gunk off carbs easily. Only 2 downsides. It very loud, and 2 for me should have went for the size larger.

I purchased this to clean bicycle chains 2-3 times a month. I was interested in a relatively small volume cleaner with an internal heater. I've only used it a couple of times so longevity is still to be determined, but it has done a great job. The integral heating element was able to achieve 170F from 120F in few minutes and the ultrasonic vibrations cleaned the chain thoroughly. If it turns out to be reliable, I'll probably purchase a second one to dedicate to waxing my chains.

I bought this to help me clean all the small and medium sized engine parts for my Mazda rotary engine rebuild. The 15L will fit one rotor on its side. It take a bit to preheat and when the ultrasonic cleaner function is on, its pretty umm, sonic. After the cycle the heater stays on so you need to go turn that off after the cleaning is done. I've used this with Super Clean and Simple Green Pro HD (the purple one, aluminum safe). The drain works fine for me and doesn't leak, although the hose kinks pretty easily.Update: the heater seems to heat to 55-60C even when I turn it down or try to turn it off. It would be nice to have actual control instead of the illusion of it.

Bought this to clean old VW carburetors and it works great! Cleans the carbs better than ever and has the brass pieces looking like new! The 3L isn't big enough to do the top and bottom of a disassembled carb at one time but the trade off is worth it for a smaller footprint and less cleaning solution. I used Berryman carb cleaner that comes in a gallon and the cleaner used about 3/4 of the gallon. The little screen basket it comes with is perfect for the jets and other small pieces.

I got mine yesterday, 07/25/2023, and it works fine. I bought it to clean my bike chain only because I used to use Kerosene to do it and it smells bad and it is toxic so I decided to try an ultrasonic machine to eliminate that kerosine of my chain cleaning equation. It works fine. Chain comes out clean enough for me. It is not intuitive to use, example: there are TWO on/off buttons on the front panel, why?????? I pressed one only and it did not started, then I pressed both and it started!!!! Why two on/off buttons????? I used the machined 4 times because if you use the basket that is included, it does not do a good job. Just don't used that basket. Put your stuff in the machine without the basket ant it will do a good job cleaning it. Max temperature is 80 degrees Celsius only. I needed more than that. I needed at least something close to 100 degrees Celsius and that is why I had to used the machine 4 times to get that chain clean enough. I wax my chain and very hot water is needed to melt the old wax mixed with dirt from past rides. Just set it up to 15 minutes and 80 degrees Celsius and used it twice to get a good cleaning of the chain (put hot water from the tap inside it to begin with), it helps a lot). Otherwise, it works great! I hope it does not stop working suddenly as it happened to some people who reported it. I will let you know if its happens. In a nutshell, It works great, not awesome cleaning, but good enough! For the price I paid, it is a good deal. To finalize I would recommend you to read the instructions carefully because it tells you what NOT to do in order to NOT break it yourself. You can not drain the water immediately after it is finished cleaning for example, you can not turn it on and put water after it and so on... Just don't do what they tell you not to and the machine will last I think... Thanks and have a nice day!

Works as advertised. The feet for the basket included was welded wrong, one side barely hanging on so the basket won't stand straight. Heater, ultrasonic, timer work fine. Wish the temperature had option for displaying in fahrenheit and not just Celsius.

I bought this 6L capacity cleaner because I had a 3L before and it really wasn't big enough for anything but small very carburetors. The 6L can accommodate decent size carbs and I mean plural because you can clean 2 or 3 at once, depending on their size.That said, I did some measurements and the tub does not match the dimensions advertised, it comes in at 12.8"x5.9" at the top and is tapered toward the bottom with depth of 5.9". However, since it is not a perfect cuboid/block, it holds only 5.5L of liquid to the very top. The recommended fill line puts the useful capacity only at 4.5L. Now as for the basket, its measurements (averaged readings from both ends of each dimensions) come in at 25cm x 11.5cm x 8.8cm (for ease of calculating) which puts its volume at 2.5L.The supplied drain hose is nicely flexible and 30.75" long and it comes with a fitting to screw into the drain (ball) valve. Silly thing: while the drain valve utilizes the standard British NPT 3/8" threads, the plastic fitting has a metric pitch of 1.25mm/thread. (see picture)Having the drain valve on the unit is very useful given its capacity but once the tub is drained, it is best to dump any remaining few milliliters by flipping the cleaner upside down because the tub bottom is not sloped toward the drain and as such does not allow all the liquid to flow out perfectly .(see picture. Word of advice: it is best not to empty the tub perfectly by shaking every drop out (with the drain valve open) because only the tub is stainless, the drain is not. And it can rust after just one use. (see picture)I like the little stainless steel ball enclosure for small items but its size (just over an inch) does not allow too many items inside, maybe 1 ring or a few short screws or carb jets. I would have preferred a bigger one but since it was a nice extra surprise (not advertised in the listing), I am not complaining.The parts cleaner is powered by a 5ft standard grounded cord.The control panel is clearly labeled, allowing for operation without having the read the user manual every time. (Though the up/down buttons are reversed, as has become the norm with Chinese designs)The control panel digits are nicely bright to read even in direct sunlight and so are the ON indicators for the heater and sonic elements, even though that the indicators are visible only from a limited angle straight ahead. Buttons have a nice and crisp feeling and the panel beeps loudly with each press. The default temperature preset is 50°C and default (longest) time for cleaning is 30 minutes. It would be nice to see maybe 60, 90 or even 99 minutes. That would eliminate the necessity to have to come back and restart the cycle for another 1/2 hour.The heating element could be a little stronger, 50W takes a very long time to heat up a full load. Specifically, a tub full of water at room temperature takes a whole 1/2-hour cleaning cycle to get up to the default preset 50°C.As far as noise levels, they aren't high. Certainly louder than the 3L cleaner I had but acceptable and not really noticeable in a work shop with tools going. I like to hear the thing buzzing anyway because at least I know it's running. When it stops, even if I miss the two loud beeps, I will notice later that there is no noise and I know the parts are done.Overall, even though the advertised capacity is above the actual capacity, this cleaner can still accommodate plenty of parts.