SarisHatch Huggers Bike Rack Accessories – Custom Fit Solutions Trunk-Mount Racks

Work great

I'm not struggling with a rear hatch, I'm struggling with trunk seam clearance. I'd tried a 3 bike Bones some years ago but could never get the middle/side anchors to work in my trunk seams without bulging or bending the trunk lid wherever they were placed. The top and bottom anchors were fine, but the side wouldn't go without force/damage. I'm not sure they had these then, but wow they sure work for me now on a 2 bike bones... With the trunk slightly ajar, I place the top anchors on the trunk lid with the rack itself sitting lightly on top. Then I get slack in the side 'Huggers' strap and drop one down along each edge of the trunk lid into the trunk, then I move on and adjust the bottom anchors at the bottom edge of the trunk at the bumper. At this point I shut the trunk. Making sure the 'Huggers' have enough slack to accommodate for the motion without coming out of the trunk, I'll slightly raise the lid and shut it down firmly. I take up the 'Hugger' strap slack to snug the block up against the inner side of the lid, tighten at the buckle and I'm good to go. Everything cinches up tight and the rack is rock solid. I couldn't use this rack, or maybe any rack, without it. Hope this helps!

A neighbor gave me a Saris Bones rack that I wanted to put on a Mini Cooper. This work perfectly for attaching it. They can become a little loose after a long drive, but they seem sturdy enough. It is a little bit of a hassle having to take them off of the rack every time you put it on/off, but I get to have a bike rack in a car not really meant with one in mind, so I consider it a win!

If Saris says you should use these on your car, get them. I thought I could get away without using them with my Saris Bones 2. I probably COULD, but I was risking the normal hooks coming off if I stopped suddenly and the weight shifted forward.The hatch huggers can't come off, not without ripping through the sheet metal of your car. (And they are big and soft so that's not going to happen)They are easy to put onto the Bones straps. Just remove the original straps with the hooks and replace them with these. Takes 2 seconds to swap them out. Once they are installed on the car the rack is super secure and CANNOT fall off the car even if the other 4 straps fail. (You wouldn't want to drive with the other 4 straps broken. The rack will flop all over the place. But it won't fall to the ground. So you'd have time to safely pull over to the side of the road and fix it without having to run into the street to retrieve whatever's left of your bike)I have also found that the Bones 2 rack is easier to install on the car with the hatch huggers than with the metal clips. I can put the hatch huggers onto the trunk first and they hold the rack up while I attach and tighten the other 4 straps. Without the huggers the upper hooks fall off while I adjust the lower straps and it's more difficult to put it on.All in all, for a product I was slightly annoyed that I had to buy to make another product work properly, these have been a very good experience.

My wife has a bike rack for her car. Well, she miss aligned the straps end piece causing it to be stuck in the hatchback door frame. I had to chisel and cut the thing out destroying the straps. Luckily, we were able to locate a new set of straps on Amazon. They work perfectly so all is well again in our household. They are a high quality product and appear to be like the original straps.

My car back window goes up all the way I didn’t feel very good about hooking onto it with latches this makes me feel better and allows me to give it a little slap with confidence as I say “this ain’t going nowhere” before I hit the road makes the whole rack feel solid

I bought these straps in case I needed them for the Saris 3 bike rack I bought. They were really helpful for the upper trunk straps. Easy to use. During high winds you might hear extra cabin noise as these straps act like guitar strings. But after stopping to check everything I was happy to continue driving to my destination.

This fills a need many have. Enables you to use your Saris on an SUV with "weak" plastic spoilers on top of the rear hatch by allowing the straps to go past the plastic and be held in between the metal hatch and the metal body. The thick padding ensures no scratches.I was swapping the straps out between these on my SUV and the originals hooks when on my roadster until I realized that the hatch huggers would also work just as well in the trunk of the roadster and also reduce the (admittedly rare) possibility of scratches on the trunk lid. Doh!