SUPCASE [Unicorn Beetle Series] Case Designed for MacBook Pro 16 inch A2141 (2019 Release), Slim Rubberized TPU Bumper Cover with Touch Bar and Touch ID (Black)

Looks pretty awesome on my 16" MBP. Appears to fit pretty well. Material is plastic but it feels premium - It's glossy and smooth on the translucent parts, and soft but solid on the opaque, bumper-like areas on the sides, that are likely to take the brunt of physical impact. Note that on the lower shell, the retaining "tabs" - the ones that sit even with the palmrest - are a little small, and so individually they don't hold very tightly. This means that if you grab the laptop by the edge and therefore press on one of these tabs, they'll start to come loose. They'll pop right back into place though; the bottom shell doesn't look like it's going to come off by any means. There are also many of these tabs, going all around the palmrest. Retention is good here. I'm not going to take off any stars for this, and I'll tell you why. First - you probably should not hold any laptop this way. Second - even if it were okay to hold a laptop as such, the rest of the bottom shell case holds on just fine. Also, the tabs in questions *need* to be small because they protrude slightly above and inward of the palmrest. If they were larger, you'd likely be running the palms/wrists/sides of your hands across them, painfully. They also would stand out visually in an unpleasant way, if they were taller or if they protruded farther inward. Some other cases (for other MacBook models at least) do have more pronounced retaining tabs that would make this less likely. They don't look as cool, though, and are kind of difficult to attach. This Supcase model, though, looks great, feels great, and is really easy to attach. I like it and would gladly buy it again.

Fit was a concern at first. But when things settled and snugged into place, my misgivings disappeared. Fantastic bit of kit to protect your laptop from mishaps. Plus, it looks cool. If I had the money, I'd buy another MacBook Pro just to have an excuse to buy another protective snap-on case.

Very happy with the quality and fit. Easy install

I got this before my MacBook arrived because I wanted to make sure my computer was protected! It does a great job and with the few times I have dropped my backpack with it inside it did a great job at protecting it. It also looks good too for being a case. I didn’t want to take the iconic Apple design away from it but this case makes it look better! I highly recommend if you are going to buy a MacBook or already have a MacBook!

UPDATE: I've had the case about a year now. It's been holding up very well until recently I'm noticing now that two of the little tabs that hook the bottom of the chassis on the lower shell have sheared off and are no longer securing the front, right corner of the case to the laptop. I know I naturally put pressure on this point as I'm wresting my wrists and palms on the unit. Unfortunate though, after a few more tabs give way I assume the shell will no longer stay on securely to the bottom of the laptop. I didn't necessarily want a cover on my MacBook for similar reasons everyone else doesn't, it looks cool as is and is very slim and sleek by itself. However, my likeliness to damage or harm my MacBook compelled me to give it a try anyway. I've seen some cases and they look just plain stupid so I was a bit worried no matter what I tried I'd be unhappy. Thus far, I've been pretty satisfied with the choice of the Supcase. It obviously is going to add a bit of girth/bulkiness to the machine, however it gives it a rugged yet sleek look that doesn't completely hide the coolness of the MacBook. The venting is done very well to match up with the airflow from the Mac. The fit is fantastic, accounting for the hinge and all but still putting clips in key areas around the Mac to hold it securely in place. The cutouts around the USB-C ports is done well to allow for plugs that might be a little bulkier than the standard Apple cord. I would say my only complaint, it you could call it that is that the lid portion of the case is heavy enough that if you jerk the laptop forward or backward fast enough, the lid will move due to the weight of the case top. And when you go to close the lid, it doesn't take much force as the top cover is helping it close due to the weight. Don't think thats a big deal, just noticeably different from closing it with the case on vs without. I haven't returned it, so that's saying a lot since I'm pretty particular about fit and look.

Good brand and bargain. This is the 3rd one i've bought so far

Really nice case for my Mac, but the bottom tabs that connect the case to the keyboard part of the Mac broke off within a month. The top part of the case looks good and has strong tabs but not so much with the bottom. If you’re not careful, the bottom part of the case could just fall off the Mac and make it a headache. It also adds quite a bit of weight. I had it on my 16inch Mac and you can feel the extra 1.5lbs making this not only bulky, but unnecessarily heavy. Would not recommend unless they make better tabs for the bottom part of the case

Easy to put on and did not cause any overheating issues. I was worried about this as I am running Linux on mine and have a different fan control and heat was a factor I was worried about.