TORRAMI Foam Seal Tape 1 inch W x 3/4 inch T x 6.5 Ft Length,High Density Foam Weather Strip Neoprene Stripping with Adhesive (Total 13 Ft Length, 2 Rolls of 6.5 Ft Each)

I used these for a sound proofing project at home by sealing the gap between the door and the floor. The gap measures around 3/4 inch, however it’s not uniformly 3/4 inch.I originally went with the high density ones, but found they have very little give and ended up getting the 1 inch low density one. The product worked like a charm. We took off the door and applied it to ensure maximum adhesiveness. We didn’t add anymore adhesive other than the original one, and it worked pretty well. I also found the adhesive is forgiving enough that if you misaligned, you could take it off and reapply.Because our floor is wood, the tight installation does make the door make a squeaky sound when closing tight, but that’s something we are okay with live with. Maybe the 3/4 low density would be the best for my use case, but they don’t offer one.Overall very satisfied with the product.

Works well.

Works but does not stick very good. Seems to stick good at first but fell off within two weeks.Gave a 1 star review at first but had to upgrade it to a 4 star.I may have gotten a bad batch. I don’t know. But I will update this review because after I contacted them about the issue. They gave me a refund within hours of speaking to them. They were extremely polite and handled the problem very fast. I must say their customer service is something other sellers should use for an example. Their customer service is excellent.

Made cowboy hat fit great

I used these as weather stripping under my tonneau cover on the bed of my truck after the supplied foam flew off the back of the truck the first time I got on the highway. I’d used this brand before (but thinner foam) for vibration isolation when mounting speakers in the truck and knew the foam and adhesive was very good quality. So I bought the thicker stuff for weather stripping and it works wonderfully! It sticks to my bumpy spray in bed liner just fine. And it made the whole setup water tight. The adhesive had no issue sticking to that less than ideal surface in bellow freezing temperatures. And I’ve been through the car was a bunch of times with it installed and it’s still holding strong after probably a dozen runs through. And it’s one of those car washes with the giant fans to set the car after, so definitely a decent test and this stuff stays!

It works fine and easy to used.

I had a very hard time peeling off the paper to uncover the sticky part. When I finally got it started to peel the covering would tear and I'd have to work at getting it off again. Way harder than it should be. I almost returned it after trying 5 times. Sixth time I got it to start to peel. Very frustrating.

This foam is very resilient. As the description says, it compresses easily but can spring right back to it's normal shape. It's closed-cell, so air does not pass through. I used it to replace the air dam on top of my AC condenser coils. After 30 years, the original foam had totally disintegrated! The first photo shows my old AC air dam. You can see the plastic frame and the last remaining bits of foam on it. The second photo shows my "rebuilt" air dam. I needed 3 inches of height. So, I put one foam strip around the top of the plastic frame, another one around the bottom, and then added a third layer to the bottom. The adhesive is very good and had no problem sticking to itself. As you can see, the foam is so flexible that it can be bent into 90 degree angles without cutting. That was great! I had to buy two packages of these foam strips for this particular job, but I'm very happy with the way it turned out.

Bien