🚗 Stay ahead on the road with flawless tire pressure monitoring—because your Toyota deserves the best!
The CDWTPS TPMS Sensor kit offers a perfect direct OE replacement for Toyota Sienna (2007-2020), Sequoia (2008-2017), and Tundra (2007-2017). Operating at 315MHz, these pre-programmed sensors require no additional setup and feature a durable CR2032 battery lasting up to 10 years. Tested for extreme temperatures and backed by a one-year warranty, this 4-piece set ensures reliable, hassle-free tire pressure monitoring tailored for your vehicle.
| Manufacturer | CDWTPS |
| Brand | CDWTPS |
| Item Weight | 5.6 ounces |
| Package Dimensions | 4.21 x 3.66 x 2.44 inches |
| Batteries | 1 CR2 batteries required. (included) |
| Manufacturer Part Number | HL009062 |
| OEM Part Number | 42607-0C070,42607-08010,42607-0C050,42607-0C091,42607-0C030 |
| Special Features | OBDⅡ connector is required 1.Confirm TPMS sensors are properly installed 2.Adjust tire pressures to placard value 3.Activate TPMS Tool on left front tire sidewall next to the valve stem 4.Repeat for RF /RR/LR tires(Sqare)if required 5.Apply OBD connector to DLC 6.Turn ignition to ON 7.Press OK on TPMS Tool to transfer data to ECU 8.Disconnect OBD connector from DLC 9.Turn ignition to OFF then on 10.Drive at 12mph for up to 5 minutes |
| Voltage | 12 Volts |
M**G
Good. Under using
Good. Lucky to find a mechnic to install
S**E
They worked great!
Very satisfied with these sensors and the support I received. Installed on a 2010 Toyota Tundra. Was having trouble with the relearn and contacted customer support ( Willie) was great to keep in touch and helped me through the process. I ended up with a maxitpms tool which completed the relearn. CTWTPS is a reputable company! Thanks
D**N
2011 Tundra Crewmax Platinum 4x4
UPDATE: 8 months, 3 of them are dead. Batteries are out. Now I have to purchase and repay a tire shop for labor again and re calibrate the system. WASTE OF MONEY AND TIME.When i first replaced them along with my tires, the tire shop didn't flush the ECU. So the light never went away. BUT when i took my truck to alignment, I asked them see if they would flush the system for me, they did it for free and only took 1 minute to do. Make sure you go to a tire shop that knows what they're doing, they should not charge extra to put them on if you're changing your tires through them.I'm 2 months in using them, no lights still.
H**A
Tpms sensor
Work as describe.
K**D
TPMS works well without the expensive price
I installed on the 2012 Toyota Sienna month ago and it works great. Since it pre programmed, all I needed to do is program the sensor ID into the car ECU with a scantool. After a minutes after programmed with the scantool all four sensors show up on the scantool and the tire pressure light on dashboard turn off.There is nothing bad I can said about this TPMS because its cheap and works just like the OEM.
W**D
Good OEM Replacement
I highly recommend these. And most places do not have a TPMS tool to read and program the new sensors. I bought one on here. I highly recommend the TS408SIt has the reader for both frequencies and the ODB2 programmer built in. It clears the old HEX IDs and programs the new ones and clear the faults and turns off the TPMS light.Well worth not having to go to the dealer.
D**O
Tire senors
Son muy buenos solo que hay que mandarlos programar
L**A
Complicated
Not easy to activate, requires special activating tool they are not plug and play
Trustpilot
1 month ago
1 month ago
