OVERTUREPLA Plus (PLA+) Filament 1.75mm Professional Toughness Enhanced Roll, Cardboard Spool, Premium 1kg(2.2lbs), Dimensional Accuracy Probability +/- 0.02mm (White)

I've been wanting to try PLA + for a while now and decided to try this. I've had an overall good experience with Overture filament.And in summary, this filament has been great. It prints well, and prints produced at appropriate heat and speeds are pointedly less brittle than standard PLA prints. My only gripe is this filament is rather hygroscopic.Diving in to details, again, I've had zero issues with printing with this filament. I've ran this filament through 0.4 mm, 0.8 mm, and 1.0 mm nozzles ( I have multiple printers) and have never had any clogs or adhesion issues, even when I ran prints far too quickly. I also gratefully note that I haven't had any tangles or snags in the filament windings.Returning to my note about heat and speeds, in my limited experience, this PLA extrudes and adheres better at hotter temps. For common PLA, I run a nozzle temp of 200-220 Celsius; For this PLA+, I've noticed better bed and layer adhesion and smoother extrusions at 220-240 Celsius. In terms of speed, I run it about the same as common PLA, with an overall average of 60 mm/sec. I'll go as slow as 20 mm/sec for small, delicate prints and up to 80 mm/sec for larger, rougher prints.Again, I've noticed this filament is rather hygroscopic. I'll be completely honest here; I do 3D printing as a hobby only, so I'm quite careless about my filaments, leaving them in the open on the printers for a week or more. When they aren't on the printers, I do keep them in a sealed storage box but I'm digressing here; With a fair amount of filament from other vendors, I can leave the filament out and only after weeks of leaving it out will I see the slightest sign of moisture in the filament. After only a few days of sitting out, this filament popped, fizzled and even bubbled the next time I used it, there was so much moisture in it.Since this is a result of my carelessness, I won't dock stars for this. But I feel it's worth noting that great care must be taken to keep this filament dry.... Oh, and I forgot to note that I live in a dry, arid region.Finally, to return to my mention of strong prints. Again, this PLA+ isn't harder than PLA, it's actually softer, gummier. This lends it more strength because instead of prints directly snapping, prints that are overstressed will simply stretch, bend and compress until surfaces slowly peel apart, like sticky gummy candy, and/or separate at a layer line.Some time ago, I 3D printed a holding box for a LiFe battery. I messed up some dimensions, so although the box printed well, I couldn't use it. That box was printed from PLA and I decided to see how brittle PLA was. When I smashed it, it literally shattered. Fast forward to printing with this, I printed another battery box, for a different battery, and once again messed up some dimensions. Remembering that I smashed the old box to see how the PLA reacted, I decided to do the same to this new, scrapped box.It wouldn't shatter....Heck, it wouldn't even break any pieces off! The box split across several layer lines, but after several minutes of smashing the box, it was still literally in one piece, albeit split many times. I've got a big project planned that's likely going to use all of this up, but if I have any remaining, I'm going to print a small decorative object and put it outside. I'm curious as to how well this stuff resists the elements. But overall, I'm very satisfied with this filament and will get more as the need arises!

UPDATE 3/25:I bought a Bambu P1S last week just after I wrote this review. The printer has printed everything great. But for some reason, this spool will NOT work in the AMS. It is slightly wider than the other spools I have, but my Overture Silk PLA works just fine. I printed and am using the AMS adapter rings for the spool so this is no problem, but the AMS just will not move this spool. I will update later if I can find a solution.Until my printers broke (an inevitability it seems), this was one of the highest quality filaments I've used so far. Now, given how unreliable 3d printers are, that isn't saying much, but I didn't have a single print failure. On my Ender3 V2 Neo, I printed an entire bed of Gridfinity cubes. I turned the speed up as high as I could to really test it, and it just printed. There was a lot of stringing, but I think I exceeded the designed speed, so that's to be expected. Plus, these are just for storage, who cares how "pretty" they were? When I printed singular items with it at standard speeds, there was no stringing, no under/over-extrusion, no problems.

this stuff is great, I was using inland and for the past year ive been using this stuff look no further. there other colors are great to like the red and transparent. digital blue is nice and the yellow is nice

Excellent filament at a great price!Filament is dimensionally accurate, no clogging issues at all. Prints nice and smooth and sticks well to the bed like any PLA should!Printer info:Ender 3 ProNozzle Temp 200°CBed Temp 60°C

The filament itself works great and is easy to print. I run it at about 210 and it has a nice matte sheen once it's printed. That being said the winding is absolutely atrocious. Every time I use this spool It's a pain and I know I'm going to have to babysit the entire print, meaning I can't let anything finish over night.I've already had two prints fail because of it (and each time I took it off and I _thought_ I got the tangles fixed) but I've bought much cheaper PLA that has had zero windings, so it's pretty frustrating getting such a simple thing wrong.Reading other reviews, it appears I'm not the only one to experience this.

Once you dial it in . Wow . Did these parts . With no cooling . They look factory produced. Outstanding. Will keep buying

As a jewelry artisan with expertise spanning 3D design, wax carving, lost wax casting, sand casting, smelting, forging, laser engraving, and sublimation, I am always on the lookout for superior materials to bring my creative visions to life. Recently, I had the pleasure of incorporating OVERTURE PLA Plus Filament into my repertoire, and I must say, it has truly elevated the quality and durability of my jewelry pieces.First and foremost, the professional toughness and enhanced properties of this PLA+ filament are remarkable. It offers a level of strength and resilience that surpasses traditional PLA filament, ensuring that my intricate designs maintain their integrity throughout the crafting process and beyond. Whether I'm creating delicate filigree pendants or robust statement rings, this filament delivers consistent results with exceptional durability.The dimensional accuracy of OVERTURE PLA Plus Filament is another standout feature. With a tolerance of just +/- 0.03 mm, I can trust that every filament strand will contribute to precise and intricate detailing in my designs. This level of precision is crucial in jewelry making, where even the smallest imperfections can impact the final product. With OVERTURE PLA Plus Filament, I have the confidence to bring my most intricate designs to fruition with flawless results.The premium quality of this filament is evident from the moment I begin printing. Its smooth and consistent extrusion ensures seamless layer adhesion and uniform filament deposition, resulting in jewelry pieces with impeccable surface finishes. Whether I'm crafting smooth, glossy surfaces or textured, matte finishes, OVERTURE PLA Plus Filament delivers exceptional print quality that enhances the overall aesthetic appeal of my creations.Additionally, the vibrant Digital Blue color of this filament adds a touch of sophistication and elegance to my jewelry designs. It provides a rich and lustrous hue that catches the eye and adds depth and dimension to each piece. Whether I'm creating modern minimalist designs or bold statement pieces, the Digital Blue filament lends a striking visual impact that sets my jewelry apart.Overall, OVERTURE PLA Plus Filament has become an indispensable component of my jewelry-making process. Its professional toughness, dimensional accuracy, premium quality, and vibrant color options have elevated the craftsmanship of my designs to new heights. I highly recommend it to fellow jewelry artisans and crafting enthusiasts who are seeking superior filament for their creative endeavors.

This PLA gives consistent results. It sticks to the bed without falling off while printing and still releases easy enough when done printing.

Great filament, prints like butter, strong and its a nicer red than most others I've tried. This red is darker and deeper than others.

works great in my ender 3 printer

I bought the red and the blue on sale. The blue was a total disappointment, but the red was excellent. I printed a temperature tower (205-210 C for my printer). I usually twist the tower to find out where the filament is brittle, and factor that into my choice, but it wouldn't break at all. I've always been able to break the tower, but the Red won't budge. The Blue fell apart instantly. I think I'll assume i had a bad roll on the Blue and re-order.