chenyang USB 3.1 Gen 2 10Gbps USB C Front Panel Header to USB Type-E Motherboard Extension Cable Adapter with 12cm PCI-E Bracket

It works perfect

Worked perfectly. It was a hard item to find. The USB 3.2 Gen 1 connector Type E connector on Asus mainboards needed this connector in my specific case to adapt is back to a USB 3.2 Gen 1 header. I added a Media Card reader and since the case already used the USB 3.2 Gen 1 header port on the MB, had to convert the Type E to support the Media Card USB 3.2 Gen 1 Connector cable.

Entrega rápida, dentro del plazo. Recomiendo el vededor.

I had to try ASUS Z370 MOBO's internal USB31G2_E3 internal connector - bottom line: not worth the effort, unless want more USB3.1 Gen 1 ports. The cable connects securely to the MOBO U31G2 header and connects to two USB3.1 Gen 1 devices. Cable does not take advantage of ASUS Gen 2 pins for CC1/CC2 and SB1/SU2.so really does not support USB 3.1 Gen 2. The cable is less than 12 inch in length, so just reaches front panel device. The cable was connected to a USB splitter cable and recognized two attached USB 3.1 thumb drives. Configured the BIOS for ASMedia front panel USB 3.1 Gen 2 (Enabled) and selected USB3.1 front panel instead of PCIeX1. Crystal Disk Mark speed test using the USB 3.1 Gen2 header and this cable gave same results for a USB 3.1 Gen 1 device, as expected. So if expecting USB3.1 Gen 2 performance from this cable - forget it! Cable does not take full advantage of the ASUS U31G2 connector, waiting for Gen 2 devices before trying a different cable.

Works well easy to install and fast shipper. Fair pricing as described in ad.

So I didn’t install this cable right out of bag, only because I’m not really a fan of these third party cables, but since this tech is more on the cutting edge of tech I figured I’d give it a shot. Well... I gave it a shot and my results are shotty at best and I will give my evidence as such.Currently am running a ASUS z270i and routed the front USB 3.0 ports (2 total) to this and now only one works. Previously confirmed that both ports were working on a downgraded USB 2.0 connection.Granted, it did work immediately once I had the cable hooked up so at least the connection was there. It just wasn’t 100%. Now I’m no expert, but this is very, very first gen tech so I just see that this as opportunity to work out the bugs and get some second gen cables going that work flawlessly.all in all. One star... I get more reliable connections with less chance of data corruption with my downgraded ports... so much for cutting edge tech...****Updated after I realized that I had to update my USB drivers...*****

This works as it should. Been using for months. Does charge on the slower side.

The media could not be loaded. The front USB 3.0 port on my Antec case was not working due to a mangled pin connectors on the motherboard. Luckily all I needed was this adapter to gain functionality. Install took a hot 2 seconds and a restart and the port was working fine. I bought this for ONLY ONE port so I cannot attest to it working for more than one. Works great with no complaints. Would buy again.