BTF-LIGHTING RGBCCT 5 Colors in 1 LED 5050SMD RGBWW RGB+Dimmable Tunable Color Temperature 2700K-6500K 16.4ft 60LEDs/m 300LEDs DC12V Multi-Colored Tape Lights IP65 White PCB(No Adapter or Controller)

I used this strip light for my closet shelves. I needed several pieces and connectors. First you need a controller so I used this one so It would have Alexa control integration. BTF-LIGHTING C05W RGBCCT PWM SMD FCOB (+ R G B C W) 6PIN LED Strip 2.4GHz Tuya WiFi Group Controller Then you need a 12v power supply and if you only use one roll, you only need a 1.5 amp 12v supply but I bought the 5 amp in case I needed more tape lighting. This tape is 6 wire for RGB with White light options. I also bought 6 wire connectors which work fine but I had to trim off about 1/4” of silicone which was easy to do. It was way to install and program to Alexa. Good product.

During our remodel project, I thought it would be cool to add some under and over cabinet lighting. I wanted something that would be easy to hide, give me lots of mounting options, and be easy to wire and control. I used these LEDs and have been very satisfied! The quality is top notch, the color and brightness are exactly what I was looking for. I put them in a track to help diffuse the light some and to hide the physical light strip. I also put them under the bar top on our kitchen island to add some additional flair. They are paired to a WiFi controller and linked to my Echo devices to I can control the brightness and color (as well as turn on and off) simply by voice. Now I find myself looking around my house for other places I can use something like this!

Using the 24V was the move. I had set up this brand in the 12v variant, which was also good, but not as good as the 24v. They are very bright if you want them to be, i was debating on putting smaller 4" inch recessed lighting over my dead spots on my counter but decided to hold off and see how these performed. They performed very well... The LEDs are very dense, the distance between each led is very small making for a very even light distribution. I decided to not use a light diffuser on my up lighting and honestly, you can hardly tell... I have these hooked up to my alexa using the BTF controllers and also have it hooked up to my Home assistant server, so everything is automaticed. Linking the skills and automations was very easy to do. Its why i went with this brand again.

Excellent quality LED strip with colors ranging from warm white to holiday reds and oranges. Two years and they have been flawless.

These look great in my over/under kitchen lighting! I have only two minor complaints: (1) the manufacturer warns that you should use another layer of tape when installing in aluminum channels to avoid shorting (I would think they would design the item so the attached tape avoids that) and (2) these are “cuttable”, but I found no way to effectively use cut ends with solderless connectors. The manufacturer’s branded connectors did not work for me, nor did other brands.

Do NOT buy. I had an electrician install these under my kitchen cabinets. Everything was fine until about 2 weeks after. I like the daylight color setting. I'm not to fond of the warm color but the lights are mixed with both. It was fine at the beginning but now it gives me a warm color. In the picture you can see the different colors. I was for my brand new kitchen and when I they started to FAIL, my return window had come and gone. BTW, we connected lights to power before install and they worked just fine.

Great

They do the job, but the included 'solderless' connectors do not work, at all. I bought 5 of these, and they all come with a coupler, I snipped and inserted with and without the adhesive backer, they all turn off the second you let go of pressure on the connector. So you have to solder these, you cannot use those clip connectors, it's a shame because these are really hard to solder with how tiny the pads are and how close together they are. I have to 3D print a jig to do it. It's a same because they make really good products - and it ruins the experience.

Bonjour, les 3 premières leds ne fonctionnent pas ... C’est très embêtant maintenant installé! !

LED's seem like they are ok, nice colour and great whites. Only disappointment for me is the product listing pictures clearly show the LED's having a double sided tape backing, where as the IP67 Rated strip does NOT have any stick on backing at all which is not clear in the listing..

Fonctionne très bien avec les systèmes milight CCT + alimentation 12v