AC Infinity CLOUDPLATE T7-N, Rack Mount Fan Panel 2U, Intake Airflow, for Cooling AV, Home Theater, Network 19” Racks

Used in an Omnimount av rack to keep the AVR cool. Easy to setup (set the temperature buffer and max fan speed) and the smart mode is perfect. Runs fans in low/quiet to maintain and responds to temperature increases as needed by turning up the fans.We had previously been using a WILLHI WH1436A Temperature Controller to operate the pre-installed fans in the Omnimount rack - but they only run at 1 speed and are seriously loud. The AC Infinity Cloudplate keeps the AVR cool, runs itself and is quiet. For AV racks, these fans are sensational.

I added this to my networking cabinet to cool my Ubiquiti gear. Works great, and looks wonderful doing it. I love the smart settings with a set buffer. Depending on the heat inside the cabinet it can self adjust the fan speed, and it works great. So far the cabinet has been to 72F under load and about 67F idle with these fans and AC Infinity quiet muffin fans in the top of the cabinet exhausting air. Very Very Very nice fan plate, feels and looks like it costs 3x more.

This is a really nice fan system and I really love it. It's great at keeping all the heat away from my server and networking rackmount equipment. Don't forget to clean the dust out of the fans every so often. It's amazing how quick dust builds up. It can stop a fan no matter how powerful the fan is (especially when the fans are on low). Fans are quiet and bearings sound nice and of high quality.I wish there was a little more control on the auto settings, like setting the degrees for each of the 3 fan speeds. Honestly, that's not even a complaint, since this already has more settings than any other cooling unit I know of and already exceeds my expectations.

I bought this for my 15 yr old Mid-Atlantic rack with two of their cooling fan systems that remain on continuously. Once installed the AC Infinity was quieter, and Cools rack in 5 min and then turned off on the Auto setting. It’s well made and efficient. I have it installed in one rack and it Cooled both of my racks ( connected racks). Right now using Mid.Atlantic fans for exhaust but i may switch to AC Infinity exhaust fans as they can be set on auto as well. Highly recommend this product.

This is a solid product for most use cases. I installed it in an audio rack, and it moves air efficiently while offering useful features. The fans have five speed settings, but noise levels are a concern. At level 1, I measured 57 dBA, and at level 5, 68 dBA. This is not a quiet unit for noise-sensitive environments.That said, with any audible audio playback, the fan noise is unnoticeable. In an FOH sound reinforcement setting, it won’t be an issue at all. However, for recording, you’ll need to consider the noise. A simple barrier should block the sound for all but the most critical or dynamic recording situations.I'll likely swap the fans for Noctuas—those only produce the sound of moving air.

The panel's build quality is very good and solid. The fan controls are easy to access, use, and read. This would be a 5/5 for price/value however there are two problems that are "major" in my opinion.1. They advertise as "Ultra-Quiet Cooling" but this is just false. I didn't really expect them to be as quiet as premium fans but this is so much louder than expected. The fans are just too loud. Even when I manually put the fan speed down to 1 (the lowest) this is louder than any other fan I have in my rack. If they didn't advertise the "Ultra-Quiet" thing, then easy 5/5, but alas...2. I'd be happy to accept the loud fans for the price of if I could replace the fans with more expensive ones. However when you open the panel you'll find that they've glued the fans's wires into the 4-pin PWM connectors on the back of the control board. I can work around removing the glue and installing new different fans but they made this more difficult than it should be and now I risk damaging the control board by doing so.As is - this is just too loud for any office or home entertainment environment. I have my half-rack on the opposite side of a 14x10 room and this even at the lowest fan speed when I'm wearing headphones I can't stand it.

High quality thermal cooling in our new Home network rack system. Fans are well designed, offer good airflow, and added to the look and serviceability of our rack.Fans are well finished, heavy gauge and very presentable. Almost a shame to lock them behind a wire front cabinet in a server room.Sound levels are well within norms for this application.Displays are easy to read and very intuitive.Highly recommend for use.

Needed to really move some air in a new rack of video components in our Mobile Broadcast Trailer. Even with great AC it still gets hot in the production trailer in the middle of the summer in South Georgia during the day. Bought 3 of these and one a bit larger. Some blew in some blew out. Work great and they are really quite. Daisy chain power supply is very handy and like the sensors that you can locate about anywhere in cabinet to monitor temp. Will be buying more for my other racks real soon to replace noisy privative fans without the monitoring these have.