Anti Vibration Pads for Washing Machine with HexaGrip - Stops Washer Dryer Moving, Walking - Prevents Noise, Vibration Transfer - Rubber Antivibration Stabilizer Support Feet Mat - VIBRASHIELD 4 Pack

Great product. We put them under my front load washer and they make a world of difference in stability and noise reduction. I have done a few large loads and I haven’t had to move the washer back into place or readjust the load because it’s gone off balance. I can confidently recommend this product

It works. I have an electric combination washer dryers unit, placed on a tiled floor. The machine used to walk during cycles and make a god awful racket. Using these heavy duty rubber feet, the machine stays in place and doesn’t make noise. And it does a great job absorbing the machine vibration.

We recently moved, selling our high end LG W&D with our old house. New house came with new whirlpool W&D of lesser quality. During my months long struggle with trying to get the darned washer balanced and stop the insane vibrating and shaking during the spin cycle, I learned that this is an inherent problem with front load washers, even though the LG never had this problem. The new set is on the 2nd floor of the new place, so that adds to the obviousness of the problem These pads have made a MASSIVE difference!! It still vibrates, but the entire house no longer shakes, and once it hits top speed of the spin cycle, it smooths out and is almost inaudible… These were an absolute game changing improvement and would definitely buy again! And at any price knowing what I know now!!! PS: the dryer doesn’t do this, so I didn’t buy a 2nd set and could care less what it looks like…. Lol

Well I gave this a four overall because it did not work for me but that probably is because I used an old computer chair mat, which is hard clear shiny plastic, under the washer, to protect the new vinyl flooring I had just laid. I cleaned the plastic mat pretty well first so probably that made it so slick the rubber feet can't get a 'grab'. The washer still walks and I have to push it back every wash. It moves about two inches forward and two inches to the side. The feet on my washer are smaller than the hole in the tops of these rubber pucks, so I positioned each puck so the washer foot would only touch one side of the hole, but it didn't help. The pucks still move. I tried only using the washer on medium instead of high spin but that ony worked for a couple of washes. The rubber pucks may actually be polishing the plastic mat underneath them, macking it slicker. I would try to glue these pucks down, but I will need to move the washer when I finish my laundry room renovation so still hopeful I can resolve this some way later on, which is why I gave it a four. The floor is wood above a crawl space and vibrates a bit, so this is not a solid floor which probably exacerbates the problem. The pucks seem good quality and heavy duty, and if standing on a floor with some 'grip', should work ok so I am not saying these won't work for you. As far as installation goes, one-handed wih a heavy washer like mine it is fairly easy but hard on the back! You have to lift the washer with one hand while bent over to push the puck under the foot. I recommend having a friend slip them under while you lift the washer (or vice versa). Shipping and packing was fine. I didn't buy a second set for the dryer because of the cost, I just put some strips of wood under the dryer feet to bring it to the same height as the washer. (The dryer never has walked and still doesn't so I wasn't going to spring the extra cash for the pucks for the dryer).

These really work well. Don't be fooled by a cheap imitation.

Wow! We didn’t expect this to work as well as it does. Our GE all-in-one is on our second floor , same level as the bedrooms, and when it would spin it would feel like we were laying in a massage chair. The vibration was crazy…. I had already leveled the unit, it’s on a solid tiled surface, over uncoupling membrane, over 3/4” OSB subfloor over 14” I-joists , so the vibration was astounding.I saw GE makes vibration dampening feet, but they’re not readily available.These looked identical, but thicker. So we gave it a shot. NO SHAKING.My wife and I both laid down on the bed and floor and it virtually eliminated the shaking . From 90-120seconds of constant violent rocking/shaking down to 2 or 3 shakes at maybe 2 seconds each. We are thrilled!!! They fit perfect around the feet, and function as advertised.Thank you for a great product!!

I suspect that a lot of the good reviews are people who just needed to level their washer.For me it seems like the washer is bouncing a little on the rubber, which makes it shake more.

Kinda works. Takes away 10-15 percent of the vibration. Still better than nothing.