🛻 Light up your ride with rugged style and effortless protection!
This Fender Flares Kit is designed specifically for 2015-2017 Ford F150 Styleside trucks, featuring a matte black Raptor-style finish and integrated LED side marker lights. Made from premium ABS material, it offers durable, full 4-piece coverage for front and rear wheels. The kit installs easily with a no-drill, screw-in system, providing both enhanced tire protection and a bold, factory-equipped look.
Color | Matte Black |
Brand | GaofeiLTF |
Vehicle Service Type | Truck |
Auto Part Position | Front |
Installation Type | Screw-In |
Finish Type | Powder Coated |
UPC | 754407644649 |
Manufacturer | Fangxinfang Auto Parts |
Country of Origin | China |
Exterior | Matt Black |
Manufacturer Part Number | 15-17-F150 |
Bulb Type | LED |
A**R
Consider reviews before purchasing
They are cool and look good from afar but quality is probably 3/10 rough jagged edges that are not straight, no instructions and one flare came without 3m tape to mount so now I have to source some so I can finish. Paint is, ehhhh not smooth rough inconsistent surface definitely a $50 product at best. I’ll have to plastidip them and put some sort of rubber trim around the edge to make them look good
E**S
The look
Had it installed professionally, my installer told me that I should have it painted so it wouldn’t fade or rust. It did cost more to have it painted but it had a primer on it so it was worth the money. Looks good and the lights look good. Over all very happy with the purchase. I don’t know what other more pricier ones look like but I feel it was a good buy!
S**S
Definitely improves the look by flowing with the body lines.
These are quality Fender Flares.They do flow nicely with the body lines on my '17 F150, which is what I was going for since all the other flares don't seem to. I ended up getting some rolls of 3M Double Sided Tape because I messed up the install quite a few times. I would also recommend some rubber strips to put in between the fenders and flares so you won't have any open gaps.The instructions recommend drilling holes in certain areas, but I didn't do that. Instead, I just used Double Sided tape and they've held strong since. But within the next couple of months I'll be removing the flares to put the rubber strips in.Also to note: Be aware that the panel to remove to get to your headlights will be covered by these flares. My plan after I remove them to install the rubber strips is to use some velcro double sided tape right at that kick panel so the flares can be pulled back enough to pop that off.But to sum it all up from my experience with these Flares, I would highly recommend them.
B**A
Mismatched Parts Received
What I got looked pretty cool but one of the pieces had the bolts style and didnt match the other three. Disappointing since I was all excited to install... looked better than my stock lariat flares even with the rough edges and sloppy textures.
M**U
Does not fit not even close
This is one of the most ridiculous products I’ve ever purchased. It doesn’t even match up to the truck bed or fender. Then when I asked for the money back, everybody acts like they don’t know about it. I’ve contacted the manufacturer and as well Amazon no response from both so be careful guys.
D**D
I had high hopes from the other reviews of these , but once open the box it was downhill from there…
I had high hopes from reading the other reviews , however the ones I received had the red liner of the double sideed sticky tape loose and the tape was useless to stick to my truck on both rears, there’s no way you could install these on the outside of a vehicle in the elements of weather and they stay on ,the tape was not even sticky where there’s liner was loose , the picture representing the hardware and wiring harness was also not what I received The 2 fronts that I received had a short piece of wire attached to the lights and no plugs on the lights or any extra wire as shown in the pic, the parts were dusty and dirty and the way everything was bubble wrapped and tons of tape, I mean tons of tape looked like these were a previous return items, the box the items came in was nice and sturdy so this didn’t happen while was shipping, I have requested a refund as even if the seller could send me the wiring harness and extras wiring, there’s no way I’m willing to peal all the double sided tape off to apply new tape just to make these work somehow, for the price there below ok, but not something you wanna put on a 60 grand f 150 ….
B**N
Worth the money
Worth the money!!! Easy install...
T**A
lights broke
the product is fairly simple to install.The front side drive light does not work, trying to see if they will send me a replacement but no luck yet.
Trustpilot
3 weeks ago
4 days ago