LightingWill 6-Pack 1 m/3.3 ft LED Aluminium Profile, Silver U-Shape LED Channel with Milky White Diffuser, End Caps and Mounting Clips for LED Strip Lights

Excellent aluminum profiles with clean light diffusion. These LightingWill LED aluminum profiles are very well made and ideal for creating a clean, professional LED installation. The aluminum channels feel solid and sturdy, and they help with both heat dissipation and keeping the LED strips neatly protected. The milky white diffuser cover does a great job of softening the light and reducing visible LED dots, giving a smooth and even lighting effect. The U-shape design is versatile and works well for under-cabinet lighting, shelves, wardrobes, and accent lighting. The included end caps and mounting clips are a nice bonus and make installation easy and tidy. Each 1-meter section is straight and well finished, and the silver anodized look blends nicely with modern interiors. Overall, this 12-pack offers excellent quality, convenience, and value for money. Highly recommended for both DIY and professional lighting projects.

Although they are a little fiddly when it comes to fitting the cover, these are great, I've used the same ones for a couple of light strips and they work well.

I used these LEDs (https://www.amazon.co.uk/dp/B08B3RV84L?ref=ppx_pop_mob_ap_share) in combination with this LED channel, and these 90 degree corner pieces (https://www.amazon.co.uk/dp/B096QFKQ5R?ref=ppx_pop_mob_ap_share) to create an amazing under-bed light setup for my daughter's bed and she loves it. I stuck the channel onto the bed using this double sided foam tape (https://www.amazon.co.uk/dp/B00UIDM8A4?ref=ppx_pop_mob_ap_share), as I didn't want to screw anything into her new bed. It's created a great place for her to play. The 90 degree corner pieces are made from 2mm thick plastic so I needed a 2mm thick foam tape to stick it on with, to allow me to be able slide the corner pieces onto the ends of the channel after I'd stuck them on. All items worked perfectly, as you can see from the images. I only used the tape along the longer side pieces and used the corner pieces to support the cross pieces of channel, at the top and bottom of the bed. This allowed me to slide the ends on without any fuss. My only gripe is that the channel covers don't diffuse the light quite as much as I'd like, but if they were any thicker they'd be harder to press on after, and they'd reduce how much light comes through, but the overall effect is still amazing. I'm not very good at DIY and I was still able to create something pretty good if I do say so myself.

These channels are well made, the aluminium is thick enough that it doesn't bend or flex, the mountings and diffuser are of equally good quality. The end caps could be a little better, if they were softer plastic they could be made to friction fit a bit tighter. A few little seals for the holes in the cap would be a good addition too for those ends where you've no wire entering the channel. Not worth losing a star for though. Overall, really pleased with these, I've made really good under and in-unit lights with these channels and I'm very confident the channels will last a lifetime. I wouldn't hesitate to buy these again.

Great product , easy to fit and simple instructions always a bonus.

Be aware: the Crystal Smoke Cover is to be avoided - it dims the LEDs a to the point that they are almost not useful. The holders are chrome metal ones! Who wants chrome if black is ordered?! Now I have to paint them. Not ideal!

Lightweight and easy to trim. The opaque plastic strip slots firmly into the side grooves and will stay where it's put forever.

I like the overall look of these once I'd fitted it around the inside of my bookshelf and so do the wife and kids. Installing the aluminium gutters were somewhat fiddly - you have to line up the brackets and fit them to the wall (I suggest you use wood if possible) then clip the gutters into those - meaning that you'll inevitably get a misaligned joint when you realise the walls are straight and square to each other. They were relatively easy to cut with a hacksaw. I recommend using a mitre box and cutting the gutters at 45 degrees at the ends to slot them together to get a better finish. That's what I did, and on most of them I got a nice join. The plastic covers can be a pain to install and I wrecked at least one by being too aggressive with a hammer. Don't do that - clip one end in and just work your thumb down and press it in as you go - very occasionally I used a rubber hammer to encourage it. Don't go nuts if you get too much resistance because you will wreck the plastic clips otherwise. You can lay the plastic over two lots of metal to hide your awful joinery - as long as you've lined them up properly.

Grate, 100% Just I would add some couplers and more brackets, apart of that do the job

Bad packing, missing some pcs

1. looks like these were originally 2m ling and someone cut them in 2 halves. 2. Finishing is terrible and they need to be further prepared to make them usable 3. plastic part impossible to fit, it keeps falling out 4. plastic is all scratched 5. Screws are shown on image, while none included 6. How it has rating 4.4 ? While all reviews are very negative ?

Described as 8mm High. Instead is much more. Not accurate and the profiles are scratched.

Bad finishing. Bad packing. Both ends of each aluminum profile and each plastic cover are hand cut not machine cut. If you install them one after the other there is a gap because of bad cutting. On top of that needed to clean each of them as the scotch was remaining everywhere