KRUPS Precision Burr Coffee Grinder: 12 Settings, 8 oz Capacity for Drip, French Press, Espresso, Pour Over, Cold Brew - Stainless Steel, 110W, Auto-Stop, Easy Clean - Coffee Grinders for Home Use

I purchased this Krups GX450 coffee grinder after having purchased the Krups 5 cup coffee maker. I was so impressed with the coffee maker that I decided I would try a Krups coffee grinder. I have had a little coffee grinder in the past and I found it somewhat annoying to use. It was too loud, too messy, too inconsistent (no options to specify the courseness of the grind, etc.) So I saw this Krups grinder on Amazon and bought it using the like new option. This saved me some considerable money on the price. (I’ve had great success with that option with other purchases from Amazon.) The device did come in the Krups box, but it looked like it had been somewhat repackaged. It was clean and looked like new. The only weird thing is, they had a hand Xeroxed instruction manual for the smaller older model in the box, rather than the one that goes with this model. I wound up having to dig deep on the Krups website to find a downloadable version of the manual for this new device. Also, strangely on Krups‘s site, they don’t even feature this new grinder on the American website. So having used the device for a few days, I must say it’s fantastic. It works super well. It’s not deafeningly loud, and it does an excellent job of grinding the coffee to the courseness that you choose. I would say the design of this unit is greatly superior to the other model they make that is smaller. Interestingly, I have yet to see any reviews on this actual unit in Amazon that pertain to this new model. Just a word of advice if you get this machine, the method to remove the bean hopper from the machine to clean it or clear it out is not very obvious. What you need to do is rotate the whole hopper counterclockwise many times until the hopper begins to unscrew from the bottom of the unit I had to do a lot of experimentation before I figured that out. And that is not clearly indicated in the instructions at all. Overall, I highly recommend this unit. It works very well and looks great with the Krups coffee maker.

Why would I buy anything else? This is the second one I have bought, the first one died after over 10 years I think. Possibly 15. It is an absolute workhorse, easy to clean, easy to adjust, looks classy on the counter, I didn't even look at any others. We have three heavy coffee drinkers in this house and don't want to change our routine. It changes grind size easily and accurately. So thankful it is still available. Do not hesitate to buy! Update: well, it didn't really die. After setting up my new grinder and recycling all the boxes, I quickly read the instruction manual (which I had tossed for the old one), and discovered that I could remove the top burr to clean deep inside. This was nearly impossible, I had to use all my strength to get the burr to turn. When I finally was able to get it out, I discovered an almost solid rock of coffee glue that was preventing the burrs from turning. It stopped working but that was a safety feature to protect the motor. Once that was removed I was able to do a deep clean on the grinder and it is working as good as new. I'm going to keep both grinders, one for decaf and one for regular. No regrets buying the new one!!

So I got this KRUPS Precision Burr Coffee Grinder thing for my apartment. it's pretty standard stuff - you pick your grind setting and then the number of cups you want to make (which is kinda cool because who wants to measure out coffee beans?). The motor seems powerful enough though i did have one time when it struggled a bit with some really oily beans, but that was only once. I guess this thing works well enough for its purpose - grinding coffee beans into different sizes depending on what you're making (pour over is my favorite). It comes with a little cleaning brush too, which is handy because the grounds get everywhere when you open it up (i mean seriously, who designed that? Couldn't they have thought of something else?). The grinder has a stainless steel body and looks pretty decent on the counter. It's got 12 settings for different grind sizes - from coarse to fine - which is more than enough for me. I mostly use it for medium grinds, but hey, options are nice right? One thing i noticed though was that some of the finer settings did produce a lot of heat when grinding, and i'm not sure if that affects the flavor or not (maybe someone smarter can figure that out). Overall, this grinder is pretty good. It does what it needs to do without too much fuss. Just be prepared for coffee grounds EVERYWHERE when you clean it - seriously, get a dustpan handy.

This is, without any doubt or equivocation, the finest grinder that I have ever owned. It is certainly a tremendous value especially at the sale price at which I purchased the item. It is noisy! However, I would be noisy too if the first thing that I had to do each morning was to fill my mouth with coffee beans and then, with my teeth, grind up enough for a couple of pots of coffee. Trust me on this, I would be howling, and growling, and barking out a LITANY of profane epithets, unceasingly!! There are settings for volume of bean to be ground in order to meet the liquid demands, and enough settings to grind the beans precisely as I like them. This setting, obviously, will be determined by the coffee blend as well as the apparatus that is employed to tackle this task. Along with the preferential whims of the human behind the magic!! Quality coffee brewing is NOT a task for the faint at heart. Their very state of emotional and physical wellness may depend upon their level competence, passion, and level of expertise, that are mandated by the task of conjuring up that precious morning commodity :) The machine has a very large bay into which I poor the appropriate amount of product, being careful not to overfill beyond my immediate need. The machine has an exceptionally large bean capacity. I use one heaping coffee measuring scoop per cup of coffee. Subsequently, I fill the bean bay up 2/3 of the way. This is the maximum amount of grounds that the coffee ground catch basket will hold. Furthermore, the filters won't accommodate beyond that ... at all!!! I no longer subscribe to the old men's tales that the consumption of a combination of slices of hockey puck look'n toast, dipped into a 12 oz. cauldron of spoon dissolving coffee, that has the same color, flavor, and texture as the aforementioned toast, will put hair on my chest. Lastly, the negligible amount of finely ground coffee that escapes the clutches of the grounds receptacle is hardly worth mentioning. I utilize the grinder as it sits on either a dish rag, or dish towel. This completely alleviates any concerns of coffee dust on my counters. It also absorbs all of the vibration of the grinder on the counter, which effectively lowers the decibel level of the grinding process. As well designed and crafted as this grinder is, again, I genuinely believe that it is going to outlast me!! Hence, it will be welcome an appropriate comrade to accompany the KOFFEE tamper that I use to PACK the grounds into the filter. The end result of this entire process is DARK STRONG, BLACK, HOT KOFFEE!! Yep, and it all starts with, and depends upon, my trusty Krups Precision Flat Burr Grinder :)

I just got this and used it for the first time, so this is only my first impression. I'll try to come back and update this review after some more time and usage. I'll list a few weirdnesses/problems, from my first use: 1. I selected 7 on the number-of-cups dial, as a cautious first try, to grind a batch of beans for making cold brew in an 8-cup French press. I poured in way more than enough beans in the intake hopper, or so I thought (I put in 2 very heaping tablespoons of beans per "cup"), and pressed the On button, assuming it would grind 7 cups' worth of beans and stop with some still left in the hopper. I was surprised that it went through all the beans I'd put in the hopper, and was still going, when I had to shut it off because the hopper was empty. This was way way more than what I usually use, to make a fairly strong batch of cold brew in my 8-cup French press (typically I use maybe 2 level-not-heaping tablespoons of beans per "cup). The grounds filled the French press more than halfway, just with the grounds, before adding any water! and this was with the # cups set to 7 not even 8, and with having shut it off after it ran out of beans to grind. So something seems way off, in its idea of how much per "cup" on its the number-of-cups dial? I scooped out half of the grounds from the French press, to approximate how much I usually use to make a reasonable batch of "8 cups" of cold brew. So I guess I'll have to set the number of cups way down to something like half (maybe 4?), on the grinder, of the number of cups given on the side of the French press, next time (i.e. 8)? [edited: used it again and set the number of cups to 6. This produced only a little more than I wanted, for the cold brew in the 8-cup French press (I scooped out the extra, enough to make a decently strong batch of hot brew in a separate 2-cup French press I have). Next time I'll try setting it to 4 or 5 cups, and see if that matches my expectations, for how much I put in the 8-cup French press for a reasonably strong batch of cold crew.] 2. I set the coarseness to something near the maximum, as shown in the instructions, past #10 and into the "swoosh" icon, since I'm making cold brew. When I ran the grinder, most of the output was satisfactorily coarse, but there was some fine powder, stuck to the side of the output container. Not too much fine powder, just a few clumps, but still disappointing; when I use a manual burr grinder on a coarse setting, I don't get any fine powder like this. [edited: see uploaded photo of the output bin, showing some unwanted/unexpected very fine powder caked together near the top, above the expected/wanted coarse grind below] 3. The instructions are a little confusing. At first I wasn't sure about the "removable upper burr", if it was needed or not, or if was optional, since it could be removed like the brush that's stuck in it? the instructions don't say you need the upper burr to be in place. Only at the end, in the "Maintenance" section, does it mention this upper burr, where it says to remove it for cleaning (so I guessed that meant you DO need it in place for grinding, if it expects you to remove it for cleaning). 4. Cleanup is a little difficult, with the fine powder stuck to everything, even though I'd used the coarsest setting so I didn't expect any such fine powder at all. My previous grinding experience, for reference: as I mentioned, nowadays I'm making cold brew, in a French press. Years ago (when I was using an Aeropress which wants finer grinds) I inherited an electric blade grinder, which can only produce very fine grind since it keeps slicing the same beans/grinds over and over. So once I began using the French press, and especially once I started making cold brew in it, I bought a manual ceramic burr grinder, a Kyocera (same as a Hario?) and used that for a while, OK but output is uneven, and there's no lid, so it's prone to spilling beans while I'm grinding, especially since sometimes it gets stuck on a bean in its craw and the handle jerks out of my hand, thereby rocking the whole thing so that some beans spill out. Then I got a Hario ceramic burr grinder, the high end super upgraded model with improved ceramic burr mechanism for more even output (?) and a lid to prevent beans from spilling out. Used that for a couple of years, until the ceramic burr got stuck on some beans and broke, the whole ceramic burr block split in half! Went back to the Kyocera for a while, again with no lid and uneven output. Then decided to try this electric Krupps burr grinder as a treat.

This is my third flat burr grinder. So some things you should all know about this style of coffee grinder. First they ALL make loud noises. They ALL have static that spread finer grinds in the grind container. This one however has much more static than the others used but I have a very good method of dealing with it I have a nice flat paintbrush that I brushed down the grinds to the bottom does not take long. Now this grinder has a few different stylistic innovations that I think are very good. First, lid to sleep sleep bean hopper not removable. At first I thought this was awkward but on second thought is one less thing to deal with putting lid back in the proper place. Second top burr is attached to a very long post which at first I thought would be awkward. But I'm testing it out it was much much easier to remove and put back in the short, stubby top burr. If you follow the instructions it is much much simpler. On first grinding I note that the grinds are all evenly done as I'd like for French press. With previous grinders I would very carefully clean out the exit port for the grinds and found there always a nice amount of grinds that were stuck in there I would take them out with my paintbrush. In this instance I did not note any great amount of grinds stuck in the port. The long brush provided is excellent for cleaning the top burr. LOVE the design, no top piece for grinding hopper, brush slides into stem oftp burr making cleaning easy, brush is wider and with long handle MUCH easier& way more efficient than the standard teeny ones AND it IS quieter than the other burr grinders For Sure. Also much less static consistand grind qand WAY less grind to clean from exit point. Quiet, FAST, easy clean, VERY regular in grind, WAY less static spray , 2X capacity (which I never will use) Just love it. We shall see how it goes in 3 to 4 months.

I have owned and used a few different brands of burr grinders which came in at various price points. This one is the only one I have owned which delivers visibly different levels of coarseness. This is important since I use cafetières ("french presses") for my coffee. These require a coarse ground coffee. Given this came in at the lower mid-range price point, that's a plus. I also like that it delivers the amount by cup size, which usually happens to be a European cup (so, two cups is about a 250ml/8oz cup). Again, this is useful if you use a cafetière since they usually are sized by volume. Bottom line for me is that this is a good value for the money from a reputable manufacturer.

I've been using this grinder since October 2022, and it's still going strong. I chose it because it was under $100 and had excellent reviews, and it hasn't disappointed. I primarily use it for dark roast beans, and the grind settings work well for my percolators, moka pot, V60, and Aeropress. While it occasionally gums up with impacted grinds, it's fairly easy to unclog—though a bit messy. The static in the container is manageable, but a better solution to prevent it would be appreciated. The measurements on the front are handy, though I usually weigh my beans before grinding. Adjusting the grind gauge can be a little tricky, but it gets the job done. I also like the kill-switch safety features that stop the grinder if the lid is open or the container isn't properly inserted. The biggest downside is the noise—it's extremely loud. People often comment on it when they're nearby. That said, it performs significantly better than a blade grinder, and for the price, it’s a solid option that suits my needs.