Behringer U-PHORIA UM2 Audiophile 2x2 USB Audio Interface with XENYX Mic Preamplifier | for Recording Microphones and Instruments

I do a lot of teleconferencing (Jitsi Meet, Zoom, MS Teams, Webex, you name it) for work, and some streaming on the side. I'm using an XLR mic and over-the-ear headphones. This device makes an ideal audio interface for those applications. Here are the specific things I like: o- Option to directly monitor mic input through headphones. This lets me hear my own audio through a zero-lag path with no "speech jammer" effect. o- Works with stock USB audio drivers on Linux and Windows 10. Nothing to download, nothing to install. Just plug it in and it goes. o- Selectable 48V phantom power. o- Clean pre-amp. Maybe not world-class, but way better than it has any right to be at this price point. The noise floor here is not going to be your limiting factor if you're using this on a conference call or Twitch stream. o- Simple controls with clear labels. Does one job with minimal hassle or clutter. The only down sides I see are: o- I'd like linear pots (sliders) instead of rotary knobs. o- The only level indication on the device itself is a set of "signal" and "clip" lights. It would be nice to have something a little more detailed. o- It would have been nicer if the XLR combo jack were on the back rather than the front. As it is, you'll have an XLR cable sticking out of the front and a USB cable hanging from the back. This can make placement awkward, depending on your setup. All in all, a very nice product which does a great job meeting my specific needs.

What drivers? I didn't need a driver once. Of course, I've updated my installation of Windows (10) correctly. I suggest you do the same before continuing. A lot of people DL or buy Win10 thinking it's ready to use, but no. It actually requires updating straight away, and unless you do that by downloading the offline installer (Google it) and spending 90+ minutes actually updating the computer, you'll be in for a heck of a time with Win10 compatibility all across the board. As far as the Behringer is concerned, with an updated version of Windows (10), it worked immediately and simply. I couldn't tell you what would happen if it weren't updated, but I imagine it'd be harder. I've found that the system needs the 48V boost to be on in order to work (for me, that is; I'm pairing it with an MXL 770, which is itself exemplary.) The gain knob is terrific, the dial is actually smooth. Almost feels like the dial on a guitar amp. This feels like a unit that was constructed using every bit of its price tag. It's plastic, but that's fine. The unit has weight and sophistication. I don't understand why there is a single bad review... scratch that, it's human error. That or poorly maintained OS updating/operation. Get your Windows working and you'll be fine. I haven't played with the secondary input, or even the onboard earphone out jack. Haven't needed to. The unit makes no hum or noise. All I hear is my voice, my mouth smacking and the CPU/case fans I have yet to reconcile in my setup. Completely satisfied. I'll update this if the unit ever fails. So far, so good. P.S. I'm using my own USB cable, which is gold plated. Perhaps that's adding to the experience, perhaps it's placebo. In either case, the cable the unit comes with is amply long and looks pretty solid. Not even thin, like what HP gives you with their printers. It's a standard USB... no micro, no mini, no bloody "C". It's an original USB that has the big square shape with the tapered side that looks as big as an old Apple Firewire. Don't know how or where a boost of forty-eight volts is coming from or even possible. The unit has no supplemental power. Hopefully it isn't frying my MoBo or USB port. It just seems to WORK! and I like that a lot. Glad I didn't spend more money on the Focusrite, although there may be a benefit there. For the purpose implied, this Behringer U-Phoria UM2 is perfect and the price is more than right. Go ahead and buy it, and ignore these negative plebeians, unless they have a professional reason for not liking the unit. I maintain that it's due to improper setup. Didn't notice any interference, and I'm also using a USB Logitech headset, the kind they use for phone calls at call centers. If a Logitech unit's drivers are getting along with another USB audio device, then you know you're going to be fine. Personally, I love this thing and can't speak highly enough about it... knock on wood!

I bought this to replace my old Native Instruments I/O, which lasted me more than five years but finally stopped functioning after my cat knocked it off my desk one too many times. The NI I/O is actually pretty rugged and survived a lot more travel and abuse than I thought it would -- the Behringer, by contrast, is much lighter and composed of standard plastic that probably won't stand up to half the abuse, so this unit is staying safely secure in a new spot on my audio work desk. When considering a new audio interface, I chose this one primarily because of the low price, the solid reviews, and because I don't need anything more than a single-channel I/O. For my projects, I record everything myself into my Reaper DAW (digital audio workstation) and layer the sounds to build tracks, so I do not need a device to capture multiple instruments at once. The Behringer has everything I need, including a direct instrument input and a microphone input with phantom power for condenser mics. I use it to record direct-in to Reaper with guitars and bass, and I run it while recording keyboard synths with my Arturia Laboratory MIDI controller. Like the NI I/O, the Behringer uses Ausio and allows me to play my guitars, bass and keys in real-time within the project, eliminating latency. Pros: The sound is crisp and clear. When I got the unit up and running, one of the first things I did was plug my Les Paul in, dial up a nice blues tone on Guitar Rig (a signal processor that emulates multitudes of guitar amp and FX sounds), and start playing some bluesy rock. The sound was outstanding, arguably even better than via my old NI audio interface -- I was able to get truly gorgeous tone, and small details like palm mutes, slides and crunchy, hot leads were rendered with clarity. I detected no unusual sound artifacts. While playing guitar, the background noise was dictated by the amp and FX simulators I was using, which was simply the result of the pick-ups I'm using and the amp/tone settings. While playing synthesizers through the MIDI controller, I detected no background noise. Cons: As I mentioned, the unit is encased in standard plastic and does not look or feel like it will handle abuse. As such, I'd recommend this primarily as a piece of hardware for an in-home studio. While it's got a nice, small form factor and it's perfectly portable, I would recommend being very careful with it and carrying it in a case if you need to travel with it. Also note that the physical package does not come with software, so you'll have to download the drivers from Behringer's website. (IMPORTANT: Download ONLY from Behringer, do not download an ASIO driver from any of the random websites out there, for the safety of your computer and data. The Behringer website is easy to navigate and the download was quick and painless.) Overall, I'd recommend this to anyone who needs a latency-free device for home recording and does not need multiple channels. If you're recording the way I do, the Behringer will serve you well. However, if you're looking to record multiple instruments simultaneously, or if you're doing projects that require you to use multiple mics on instruments like drums, then you should take a look at the more expensive multi-channel audio interfaces out there.

I've been a professional recording engineer for 30 years.I wanted a small, portable interface to carry around the studio to various computers, and to serve as an emergency backup for my 8-channel audio interface. In my opinion, the Behringer UM2 sounds very clean, comparable to more expensive interfaces, but only when the audio drivers and Windows sound settings are set up correctly. In spite of Behringer recommending the ASIO4ALL driver, I could not get ASIO to recognize the UM2 with any of my audio programs. However, MME, Wave Out,and Direct Sound drivers worked with the UM2. In some DAWs, the WDM driver worked too. Some versions of Audacity do not show the audio driver but they recognize the UM2 anyway. When you use those drivers, the Windows Sound Settings have to be set just right. If you set the Windows mic gain to 100%, the recording level is much higher than the UM2 signal LEDS show. Even setting the UM2 to minimum gain results in distorted or noisy recordings with digital clock noise.. But if you set the Windows mic gain to 50% to 60%, the DAW recording level and the UM2 signal LEDS correlate better and the recording is very clean. Here's how to set the mic gain. In the Windows Search bar, type Settings. Then select System > Sound, and set the Output device to Speakers (USB Audio CODEC). Set the Input device to Microphone (USB Audio CODEC). Click Device Properties. Set the microphone volume to 50% to 60%. That results in correct gain staging. The UM2 is a 2-channel device. Channel 1 is the mic or line input. Channel 2 is the instrument input. To record from a microphone, set the input device in your DAW to Left Microphone (USB Audio CODEC). To record an instrument plugged into the instrument jack, set the input device in your DAW to Right Microphone (USB Audio CODEC). To record both at once, set the input device to Stereo Microphone (USB Audio CODEC). Note that the UM2 records at 16 bits, not 24 bits, so you need to be careful in setting recording levels. I aim for -3 dB to -6 dB maximum in peak meter mode in the DAW meters. Important: Be sure that "Microphone access for this device" is ON. In Windows Settings > Privacy > Microphone, turn on "Allow apps to access your microphone". Otherrwise your DAW won't recognize your audio devices. The plastic housing of the UM2 seems very sturdy. This is not junk; it's a professional-quality device for only $49.00. Amazing.

I'm just getting my feet wet with running guitar into computer and iPad. I was initially unimpressed because I didn't know that the headphone output on this was the processed signal, thought it was just the dry input amplified. THAT WAS DUMB! Tons of latency running through Mac Mini because I was doing it wrong!!! I'm new at this, not in my wildest dreams did I think the USB would be a 2-way connection. Anyway, after figuring THAT out, the latency issue is resolved with the Mac Mini and it's fantastic!!! I don't have any noise issues except for the fact that when you run high-gain amp models and effects you will, of course, have noise from those. I have an old iPad Air 2 that wasn't getting any use so I tried hooking this up to it. After a failed attempt with a knockoff Lightning>USB connector I bought the official Apple with Lightning out, Lightning IN, and a USB3 plug. Hook the UM2 into a powered USB hum and then into the Apple adapter. Works like magic! Yeah, you can buy "better" A/D interfaces, but unless you're making great money with this tool it might be better to use that money on software or other hardware. Again, I'm nobody, just playing guitar in my house and occasionally at a friends house. Maybe you need a metal case cuz it's getting knocked around, or maybe you're laying down sick tracks for some collaboration. I suppose if you were in an environment with a lot of RF interference a metal case might help. Yes it's a budget brand, but budget doesn't equal unusable, and in this case I'm thrilled with the performance. You can easily find other reviews/opinions with clickbait utube thumbnails saying "Don't buy this!" or similar, but that seems to be true of all products nowadays. All the functions work as they should, no issues to report besides user error.

The Behringer U-Phoria UM2 USB Audio Interface is an absolute game-changer for anyone looking to elevate their audio recording setup. I recently paired it with my Rode PodMic, and the results have been outstanding. This audio interface delivers crystal-clear sound quality, allowing the Rode PodMic to shine and capture every nuance of my voice. Whether I'm recording podcasts, voiceovers, or music, the UM2 ensures that my audio comes through with pristine clarity and accuracy. I also appreciate the ease of use and versatility of the UM2. With its plug-and-play functionality, I was up and running in no time, and the intuitive controls make it easy to adjust levels and settings to suit my needs. Overall, I'm extremely impressed with the Behringer U-Phoria UM2 USB Audio Interface. It's the perfect companion for the Rode PodMic, delivering professional-grade sound quality and performance at an affordable price point. If you're looking to take your audio recording to the next level, I highly recommend giving the UM2 a try.

I like that I can use this interface to record or listen to my guitar without any latency. It's also somewhat useful as an external DAC, but mostly because I am using relatively easy to drive SHP9500s. If you have higher impedance headphones, you will likely need an additional amp to get the volume you want out of it. There is a noticeable hissing sound when the windows volume is set to 100 and the behringer is above 50% output. Not an issue for my normal use, but it would certainly affect users with those harder to drive headphones. The build quality is cheap. On the front of the interface, there is a spot that appeared in less than a week of normal use. I am not sure how or why, but it is there. Apart from the front being covered with something that is very easy to damage, it seems built well enough to last a few years of normal use. The knobs are smooth to turn and very satisfying. The feet seem like they will wear quickly if not placed on something that doesn't rub nicely against it. The silver ring around the front is not lined up properly with the rest of the unit. It's a very minor detail, but it is another one that shows that you get what you pay for. If you are looking for something sturdy and well put together, look elsewhere. If you don't give 2 s***s what the thing feels like as long as it does its job, this is the interface for you. Getting the thing to do what I wanted to was a frustrating process. As other reviewers have mentioned, the "newest" drivers on Behringer's site are useless, and I skipped over them entirely. The 2.8.40 ones work well enough. It is important to note that if you are recording something from the left input, it will be in the left channel only. The same goes for the right input. You can record both channels in the software of your choosing and split the stereo file to mono left and right tracks to get the audio by itself for whichever input you're recording. I can't speak on the quality of this for a condenser microphone, but my Squier sounds very nice through either of the inputs (you can plug a 1/4 straight into the XLR one). The microphone input has more gain, though, and if I set it high enough the audio starts clipping. Who knew you could use this as a distortion pedal too? Jokes aside, if you want to make sure your audio won't clip it is better to use the instrument input, as the gain is low enough that no matter what you're doing, it won't clip. At least in my experience so far. While writing this review, I received a windows notification, and there was buzzing in the left channel. Disconnecting the interface and reconnecting it solved the problem, but it's important to know that stuff like this will happen. It also makes me wonder how long this thing will last without the DAC exploding. Not recommended for any sort of professional use.

High quality on a budget. Really good, Behringer ALWAYS deliver great stuff.

Ich habe mir dieses Audio Interface gekauft um ein XLR Mikro an einen PC anschließen zu können. Was soll ich sagen, ich bin begeistert. Für diese Anwendung ist das U-Phoria von Behringer einfach perfekt geeignet. Die Speisung erfolgt direkt über den USB Anschluss und funktioniert einwandfrei, die Tonqualität ist super und ich bin begeistert das alles Plug'n'play funktioniert hat. Das Behringer U-Phoria wird als "USB Audio CODEC" unter Windows 11 ohne weiteren Treiber erkannt und ist sofort benutzbar. Die Standard Windows 11 Treiber ermöglichen auch die Ausgabe von Ton über das Interface, so das alle Ausgänge des Interface genutzt werden können. So kann man eine komplexe Anlage erstellen, selbst mit nur einem XLR und einem Klinken Anschluss. Klar die Verarbeitung wirkt nun etwas billig und man findet Produktionsreste und Nähte auf den Drehschaltern, aber das ist wohl in diesem Segment kein Problem. Immerhin ist es das günstigste Audio Interface das ich gefunden habe, da beschwere ich mich nicht das ich keine Knöpfe aus gebürstetem Aluminium bekomme. Ich will das Teil nichtmehr missen müssen, ich würde es Jederzeit wieder kaufen.

LE POURQUOI DU COMMENT -------------------------------------------------------------------- Voilà : one's uppon a time, j'avais un mini-PC sur ma sono qui me servait - et me sert encore , mais en mieux maintenant ! - pour le streaming audio. Et c'est pas pour fayoter, mais AMAZON Music est une bibliothèque sans fin pour ça, avec de la HD, de l'UHD et un nombre de titres incroyable. Ce qui est bien avec ce mini-PC, c'est que je peux prendre la main dessus par plein de moyens, dont une radiocommande clavier/souris, AnyDesk, etc. Il est relié à lui seul sur 2 entrées de ma table de mix principale. Seulement, j'avais une carte son assez pourritte... Du dépannage qui commençait à un peu trop durer. Et comme je mélange ça avec dans un ensemble son/DAW, et des cartes comme Steinberg et PreSonus ça faisait désordre. J'ai donc opté pour cette carte pas chère du tout de chez Behringer (j'ai déjà du matériel de cette marque, éléments de sono, synthés). LE RESULTAT DES COURSES -------------------------------------------------------------------- Pour 32€ je me trouve avec un streaming audio qui n'a plus rien à voir ! Et encore, je n'exploiterai même pas les entrées de la carte... Elle est donc carrément sous-utilisée, mais bon. Je vous laisse regarder les photos et les vidéos (le son n'est pas mixé, désolé, c'est celui du téléphone, pas le temps pour ça). Mais croyez-moi, c'est du tonnerre ! Niveau installation : rien à faire du tout. Et surtout, le lecteur AMAZON Music ne s'arrête même plus en cas de débranchement de l'USB ! Ce n'était pas le cas avec mon ancienne "carte son". Pour recâbler proprement : hop! Je coupe. Hop! Je remets, aucun soucis niveau Windows (10 Pro). Vous remarquerez que j'ai doublé les sortie L/R. En effet, une paire va sur la table de mixage, l'autre directement sur les entrées de la Steinberg de mon PC DAW (un mini-PC de gamer, faut ça pour la MAO). J'ai un sélecteur qui permet de swaper mix/direct pour les prises de son/échantillonnages. J'ai en plus, gagné un des ces gains par rapport à l'autre carte !!! Et ce son, clair, puissant, qui claque comme il faut dans mes AYRA PRO 6 :-D (réglées au neutre je précise). Eh ! Allez-y franchement ! Pour 30€ j'ai vite abandonné l'idée chinoise, si vous voyez ce que je veux dire ;) Commandée hier, testé et approuvée cet après-midi ! Que demander de plus ? Dommage, on ne peut uploader qu'une seule vidéo ici, mais bon, cela vous donnera une idée.

Is zeer moeilijk om nu nog de beste drivers voor te vinden in windows 11 en werkt van geen kanten.

This is exactly what I need as I purchase a AT2020 overhead mic. Both works together seamlessly. The packaging was good the delivery was acceptable.

Before buying Behringer UM2 I had many apprehensions, since I am do not have much knowledge about music production and related things. Here, I would like to give a detailed account of its usage, so other youtubers and podcasters would not have to do the amout of reasearch that I had to put in. I don't know how good this is for music. I didn't hear any hiss even after I cranked up the gain to the max. But for voice recoding, this sounds perfect. Unlike what many people state, I went for a dynamic mic instead of a condenser. That is because, condenser mics including lav mics like Boya are good at capturing all the frequencies, so the overall sound quality would be high. But, they are also good at capturing background noise too. But a dynamic mic ( a 700 rupee Ahuja mic) would be so silent that I was able to record my voice at a pro level when another room was undergoing renovation and masonry work. The gain is just average and I have to give 150% amplification in audacity. Yet, the audio seems to be clean. We have to use an interface like this Behringer, since dynamics mics do not have their own power, so the signal would be too feeble to be picked up by the computer. To use Behringer UM2 , first attach the cable that came with mic to the front left port of Behringer UM2. Mine was an xlr to 6mm connector. The same port in the UM2 can also accept XLR cable. Now, connect a USB cable provided inside to your deskop/laptop. This usb cable is different from the usual USB cables, so you should not lose it. This cable feeds power to the UM2 from the desktop and also sends data to the computer. Finally go to setting (I use linux mint) and make adjustments like the one given in my pic. Thats it.