AODELAN Camera Remote Control | Wireless Shutter Release | for Sony a5100 a6000 a6300 a5000 a7 III a7 II a7 a7R III a9 RX100 III RX10M2 | Replaces Sony RM-L1AM and RM-SPR1

Easy to pair and great size! Can’t beat the price!

I was worried about the remote being hard to use or not working with camera. Wrong. This is an excellent product.

Love it very handy and useful when trying to take your own family pictures with camera!

worked great with my canon

The Remote was easy to setup and get started using it. Sometimes it seemed very sensitive to my touch and took more images than I expected. The cable that connected the Receiver had a straight plug in so it stuck out backwards into my forehead. The other cable used for another camera had a 90 degree bend after it was plugged in so it didn't protrude out the back. Overall a good device.

I bought one of these to use with my Nikon D 7500 while taking pictures with a long lens and camera mounted on a tripod. I wanted to reduce camera shake while taking picture of birds and also when doing night photography with a 500 mm lens. The device comes with two cables, a 10 pin round cable and a square cable that fits my Nikon. The other end as a round 2.5mm plug that fits into the receiver. The receiver can mount on the hot shoe of your camera or can be mounted elsewhere using the 1/4 - 20 tripod mount the spiral cable allows you to orient it away fro the camera. Be careful to make sure the cable and the wrist strap are arranged so as not to interfere with the operation of your camera.Before mounting the receiver on your hot shoe, plug the round 2.5 mm plug into the receiver. I found I had to push it in firmly to get it engaged. That is not something you want to do while the receiver is on the camera because the hot shoe mount is only made of plastic and you could break it off easily. Plug the other end into your camera being careful to observe the orientation. The camera plug is marked to make this easier but you might want to put a spot of white paint on it to make it even easier, especially in low light.Turn on the receiver by pressing the on/off switch. There is a green LED that blinks to let you know it is on, If your situation requires total darkness, put some tape over the LED. Turn on the camera and the remote should operate, The receiver has a button to trigger the shutter. A half press focuses the lens and a full press takes the picture. Push and hold to take a burst of pictures. You can also use the small remote to trigger the camera. The smaller remote includes a second button that gives you a 2 second delay, This is useful for self portraits in case you were looking at a monitor, it gives you time to focus back on the camera lens.When I have a chance to check the range of operation, I will append the results to this review.I think this device is a good value overall for my needs. The durability is probably not going to be enough for a professional photographer but it is a value priced option for us amateurs.

This remote was awful. I had to press the button to connect the two remotes every 3rd pic or so. I missed so many shots because I had to keep pressing the on button to keep the remotes tethered to eachother. It was pointless to have remotes. Also there is a hearing aid battery in the small remote which didnt last long at all. My last remote I had for 13+ years with no problems. This remote was a joke. I do NOT recommend this to anyone.

I was blown away by how easy this was:• install batteries• use the cord to connect the transmitter to your camera• press the power button on both• press the button on either one to take a picture!No programming or set up needed. It just worked right away on my Canon Rebel T7. you do need to provide two AAA batteries, but it comes with the needed button battery for the remote.