U-Pol Raptor 4 Quart Kit - Black Urethane Spray-On Truck Bed Liner Kit Custom Coat Spray Gun with Regulator - Bonus Aerosol Bedliner Can

The best easy to use and so durable

Had much more than I needed. I removed the rack from my stepdaughter’s FJ Cruiser and sprayed it with this stuff Easy to use and and included sprayer made this my go-to product for any similar future projects. I highly recommend this stuff.

I researched the hell out of this product via YouTube... watched a ton of how to videos and decided to go with it. My truck was developing a fair bit of under paint rust bubbles along the rockers. WITHOUT A DOUBT, preparation work is the key ingredient in applying this spray. I sanded out all rust, bondo'd where necessary, scuffed every square inch I wanted to spray with 80 grit sandpaper, wiped clean with denatured alcohol, taped it off with good painters tape, covered the rest of the truck and garage floor in plastic, and went to spraying.The spraying is the simplest part. I used a graduated mixing cup to add the right amount of hardener and shook it hard as I could for 2+ minutes. I ran the gun at 50 PSI with the nozzle all the way threaded in and really like the texture I ended up with. It is very similar to new factory applied bed liner. Not tacky once fully cured, more like a hard plastic.I used 3 and a half bottle to spray both sides. It may have been overkill but I cleared the gun with denatured alcohol between bottles... just wiped the stem off with a rag, ran that down in the alcohol bottle, and sprayed til it came out clear (then let the gun fully dry, which is pretty quick with the alcohol).I allowed 1 hour between coats and 30-40 minutes before pulling the tape. That produced excellent edge retention.Lastly, because of the weather when I applied it, I left the truck in the garage for 3 full days to allow the Raptor Liner to cure. Instructions said to NOT allow it to get wet before it is cured. The very last thing I want is for water to get behind the liner.I would do this again without a doubt. Plan to do the bed next.But remember; IT IS IN THE PREP WORK. Don't slack on that and all else comes much easier. Best to ya!

I think this is a great do-it-yourself product. However if you are going to use a color I would recommend doing your 1st coat in black and saving the color for your last topcoat. If doing a large project it should save you some money using black as a base.

The kit is very affordable with clear instructions and easy to use. The final results are good looking and last great. This is my 3rd time using it for personal use and I now have the company I work for using it as well.

So was a little skeptical but when I received my order and applied raptor to my 21 F250 I was very impressed!! Save you money and do it yourself!! Awesome product!!

Raptor Liner is a great product, easy to use , super durable... I chose this offer because I thought it would be nice to upgrade to an adjustable gun... bad choice, what came unlike what was pictured in the ad was a piece of junk with a plastic trigger that immediately folds to the side. Becomes a two handed operation. I'm surprised that I wasted the thinner to clean it.Other than that was a nice package !

Easy to install but let cure for a week and it chipped the first time I put some wood in the bed