StanceMagic - 2pcs 3mm Hubcentric Wheel Spacers (5x112, 66.6mm Bore, No Lip) Compatible with Audi A4 S4 A5 S5 A6 S6 A7 S7 A8 Quattro B8, 2019+ BMW (G-Chassis), and Mercedes Vehicles - 66.56mm

I replaced rims on a 2005 SLK350 due to a vibration issue with prior non-standard rims and 12mm spacers. Although the wheel company assured me the new rims would absolutely fit without spacers, they did not - they slightly rubbed on the front calipers. This forced me to resort to spacers (again) - by getting these 3mm spacers, I was able to get the rims to clear the calipers by about 2mm and still allow the rim itself to center on the hub - so far, no vibrations. The spacers were very accurate in the hole spacing and the center hub hole (fit snugly on the hub - also, I measured the hole with a digital caliper and it was spot on). Thanks for solving a problem created by other's misinformation.

Fits front 66mm hubs that are too long for stepped spacers, such as the Mercedes R230

Ended up not being when I needed but for the money great quality product

Installed the 5mm spacer on a 2014 Audi A4 with aftermarket wheels to get a more flush fit. The 5mm is the max thickness you want to use on this car to keep enough hub exposed for the tire centering, Anything larger requires a Hubcentric spacer.Make sure you order longer wheel bolts which I did order from the same seller. No vibrations noticed. Easy install, much cheaper than other "performance brands". I am actually Using the 3mm on the front and 5mm in the rear. Quite happy with the product and the look I achieved with it and the huge cost savings.

Fits like it should. A little loose at the center hub.

Great quality and good fitment definitely recommend.

Never had a problem with these after installing them on my car. They were cheap and served their purpose well.

Good fit. 🙂