Mayhew Tools 31970 Pneumatic Scraper, 2" x 8-1/2", Black Oxide Finish

I used this to chisel mortar off my concrete, previous owner laid brick in my courtyard and demoed it leaving behind the mortar. It worked very well.

Bought this to pull up some ceramic tile in my laundry room. I also ordered another similar one with a 3" width to see which one looked like it would do the job better, and I decided to go with this one due to the angled end. The angle made it easier to get the tool under the tile without having the air tool body getting wedged against the floor as tight. It lasted through the job, and while it's pretty scratched up now, it isn't showing any functional wear. Very happy with my choice. Should last me a lifetime for my occasional use.

This was a great help getting up parquet flooring. Had to sharpen it a bit to get under the floor, but really a time saver.

These chisel bits seem to work pretty well I’m using them to cut out tops of metal barrels

Used this with an air hammer to separate 225 square feet of ceramic tile and Durock cement board from the OSB sub-floor. I only needed to touch up the edge once. Purchased specifically for the tile removal and it performed well. No complaints. Would recommend to others

This worked great to remove the sealant on an RV roof, and it worked great to seperate the corner trim away from the roof of the RV. I used with a cheap kolbalt air chisel. Only downside was that it quickly dulled when running into screws, but i was back in business with some careful sharpening. I will also note that it did not deform much when hitting screws, and overall it did very well with the task. It took a project that was taking days into just a few hours!

I bought this tool for something it’s not really intended for and figured I’d render it as useless once I was done with the task. It’s still in new condition even after the abuse I put it through. There may be other chisels that look like this one but I would definitely go with this brand.

This tool held up extremely well for me. I had to remove surrounding pool coping brick, about 280 of them and then clean the mortar off the sides and bottom of each brick! This tool help up perfectly and still holds a good edge to it. Great value when used properly for what it is designed for.

I’m a contractor of 30 years and I have to say that this little bit is awesome. Paired with an air hammer and this chisel I managed to remove over 500 square feet of ceramic tiles in about 4 hrs. Don’t hesitate buy it.

OK

Tiene buen tamaño, ademas de una curvatura que resulta excelente para quitar losetas de pared y pisos 100% recomendable

J'AI TRAVAILLÉ AVEC CE PRODUIT ET IL TRAVAILLE TRÈS BIEN ,JE LE RECOMMANDE

I used this fro ripping up ceramic tile and scraping up the mortar. Quit happy with the results. Good value