Radiantz Motorcycle License Plate Frame with 6 White LED Lights, Slim Design Aluminum Metal Plate Holder, Universal Fit Illuminator, Weather Resistant Tag Frame for Motorcycles Front or Rear – Chrome

I searched and looked at lighted frames for a while and so glad I decided on the Radiantz.I love this lighted frame, looks great at night, emits a nice bright white-blue glow, add to that my license plate is white and blue, really makes the back of the bike stand out at night. Its clearly noticeable.The blue -white leds built into the frame is a nice, for lack of a better word "clean" light that makes whatever chrome you have in the back sparkle, makes the red reflectors of the tail light stand out as well.It almost looks like there is a neon light in there. Of course there is not.To me the construction seems to be top notch, the LED's are nicely tucked up and under the lid of the frame protected by a sealed and by what seems like a high quality plastic type lens covering the LEDS.Chrome finish is nice and you can tell it is a machined metal frame, not some rolled cheaper light weight frame.As mentioned by some others which I was well aware of, you will need to either cut a TINY piece of metal out of the very tip of your license plate for the wire to pass by. I didnt even have to cut anything, just took a pair of needle nose plyers and bent a TINY place at the top of the plate for the wire to pass. NOT a big deal at all, its covered by the frame, I was a little concerned before I ordered it and so glad I did because its a big nothing to do, no big deal at all.Dollar for dollar, which is almost nothing for the low cost, quite honestly I think this nice frame adds a heck of a lot more "eye candy" (and possibly safety) then anything else on the bike that can be seen at night.Highly Recommended and a true quality product at a very reasonable price.

I bought this to modify my Vulcan 900 custom hiney and get rid of that horrible piece of black plastic hanging down under my nice custom chopped rear fender. I did this by sawing the black plastic right below the hole for the old plate light and moving the plate mounting bracket up to the holes above it. Now the new plate sits right under the fender and looks absolutely spectacularly custom. I still use the original turn lights, but the new plate frame has LED white lites ... well they're kind of blue tinted and mystical. Installation was no problem at all, except the placement of the electrical leads to the LEDs pinches the wire between the license plate and the frame, so you have to cut a little V in the plate itself, but that doesn't show at all after mounting it all. I'll put up a picture after I'm finished with some other mods I'm making. I'm very pleased with this, only drawbacks being the notch you have to cut in your license plate, and that the LEDs are not very bright... it's cool looking, but you might have a hard time with the vehicle inspector in your state... during the day you have to hold your hand right up against them to see any light.Bottom line: Worth the money.From Utopia, havagoodun!

This is a great product. I bought this to light up my plate since I eliminated the fender on my bike. The construction feels solid/sturdy, its metal, lights up nicely and its bright! (has a bluish tint like H.I.Ds), it came with all the mounting hardware. Cosmetically it is a 10! I wanted the clean look and that's exactly what I got. I'm glad I didn't buy the other products I was considering.The only cons are the the wires. The wires are very thin and I had to cut a tiny chunk of my plate so that it could mount it flush to the frame. I also did that because I didn't want the wire to get pinched and end up cutting the wire when tightening the bolts.I did a DIY fender chop so I didn't mind cutting the plate at all (you cant see it anyway) and I got it to look exactly the way I wanted. If anything happens to my fender I would buy this again in a heartbeat and I recommend it to everyone.

This licence plate holder looks perfectly fine. The trouble is that I haven’t used it yet. I bought it to replace the one on my motorcycle in which some of the bulbs were going out. But then, the old one started working again, so I put the new one in a drawer until such time as I needed to replace it. If I ever do use it, I’ll update this review.

Bought this motorcycle license plate holder to solve a problem with a chromed out sportbike. Mounted it on the frame of a 2001 GSXR 750 and it looks custom. Love that it is all metal. Being I mounted on the swing arm, I needed to extend the wires to the running lights in the tail section. The multiple LED's really light up the plate and the chrome back section as well. I first looked at those small bullet LED's, but they didn't see too bright. I really like this set up. Time will tell if it will last, but it is the best solution to mounting a plate in a custom area and pass inspection in VA.

Good fit on my aftermarket side mount. Very bright LEDs. The down side is I have to replace mine every 2 or 3 years because the chrome flakes off. But for only about $20 a pop it is worth it to me.

Amazon purchase.Great license frame, and LEDs are bright white. Looks very good.Please know going in that most (probably all) installations are going to require some additional work on your part.The routing of the LED power wire is going to need the license plate...and most likely the mounting plate (behind the license plate) to be drilled.Not a huge deal...I knew this would be needed and it took about 15-minutes to get everything measured/drilled/installed. Easy 'custom' install.

Complete kit, easy installation.