Molle Admin Pouch Tactical EDC Tool Pouch

I know, I know... "Made in China". I'm supposed to tell you how it's low quality and made from cheaper materials, right? Well you're gonna have a conniption because this pouch is really, REALLY good. The quality, design, materials... it's all top notch. It's ok, breathe. Relax. You good? You sure? Ok. First off, Elite Spanker shipped it out the next day so it started moving to me almost instantly and was in my hands, *from China*-- halfway across the world-- in 9 days. Tell me you haven't ordered something in your own country that took longer. Honestly it's one of the best you can find for an EOD/utility/tool pouch and second only to HSGI's "Tech/Admin Pouch". It's practically the same size as HSGI's (about 1/2" shorter all around), is unfortunately not quite as well designed internally as the HSGI (it's still good but has some issues) but it's also half the cost. It's made out of 500D Cordura like *every other company* around the world that makes tactical gear and uses official multicam nylon. It has sturdy YKK zippers that Elite Spanker had the foresight to put heat shrink tubes around the pulls so I don't have to. There's a nice slot for a small pen on the front that is made out of a synthetic material that feels leather-like and it's also PALS compatible because Yo Dawg, we heard you like pouches so we made a pouch you can put a more pouches onto your pouch (that's right, I'm digging that meme up). It's also got a nice zippered front pouch for a notebook and while the button closure feels unnecessary it's welcome all the same. The stitching is exact, no loose threads and is toughened up at the stress points. Inside is where it counts though, right? Right. The inside is ENORMOUS. You will have plenty of space for most tools plus smaller, easily lost items can go in the zippered section to keep them safe and secure. The front and middle panels have elastic webbing that face each other, with larger webbing behind smaller ones. The inward facing side of the center panel is covered in loop so you can attach small hook pouches or patches. The back panel has 3 open top pockets, 2 small and 1 big. Right now this pouch is holding my multitool, 2 buffers, pen & sharpie, cleaning clothes, a bunch of small parts for my lower receiver, a nylon & steel brush, 2 screw drivers, a flashlight, electrical tape, laser boresight, a tactical 'Dillo from LaRue, a Torx screw set and there's plenty of space for more. Ok, the cons, or, how I would make this the absolute best tool pouch on the market (hopefully Elite Spanker reads their reviews because these issues can be easily fixed and it would destroy the competition if they made the fixes)-- 1) It needs MUCH more 1/2" elastic webbing. Currently there are only 2, half inch spots out of 3 straps of webbing. There are two identical elastic webbing straps facing each other so take one of them and change it a row of as many 1/2" sections as you can fit on the strap. 1/2" is the perfect size for all sorts of items... pens, screw drivers, rods, lighters, batteries, a million different things. Behind it 1" or 2" webbing. 2) Ditch the two smaller open top pockets at the back and replace it with zippered mesh pockets. Either 2 small and 1 medium or 2 medium sized. Mesh pockets work for every use imaginable... tools, medical, EDC, etc. 3) While the loop side of the center panel is nice, it's unnecessary. Replace it with more webbing and/or mesh pockets or a series of draw strings for those who want to use it as a medical pouch. Definitely keep it detachable. That's a really great touch. 4) And lastly the biggest issue... it needs to be deeper. The bottom is currently around 2" but needs 3" at least, probably 4". This pouch can hold SO MUCH but ultimately it's limited by the fact that, even at around 70% full, you can't zipper it shut because 2" is nowhere near deep enough. Yes, you can always take out the center panel but that also means you'll loose half the space to strap down tools. This is also partly because the elastic webbing on the center panel and the front faces each other so whatever you strap down has to be placed in an avoidance pattern so it doesn't push against whatever is strapped down on the opposite side. The fix for this is to push the depth out by 1 or 2" to make this a non-issue and it'll be perfect. Oh-- laser cut webbing would be nice, too 😎 And that's all! If you need a tool pouch you honestly can't go wrong with this. It's legit quality and half the price of the HSGI tool pouch which I know is a big deciding factor for so many people. Shipping really isn't that much longer than usual, despite coming from China. The quality and toughness is exactly the same as "name brand" manufacturers and it's made from the exact same materials-- 500D official multicam Cordura. So unless you're an HSGI loyalist or have a *very* specific reason to get that pouch, this should be the one you get! Sometimes you can save money AND get quality!

I bought this pack for my Jeep, to strap into a MOLLE mounting solution on the inside of the rear tailgate. The idea was to use it to carry specific small tools and gadgets. I was reluctant at first because there are several styles/models all measuring slightly different and wasn’t sure which I had ordered. This one turns out to be about 9" wide x 7.5" tall by about 3" deep. When it did arrive I was surprised. First impressions were hefty construction, durable, solid, well-made with plenty of room for my application - without being too large and cumbersome. Because it lives in the Jeep, weight isn’t a concern, but its size is perfect. I can fit a Leatherman, Mini-Mag Light, folding knife, tire gauges, etc. MOLLE straps worked perfect for my use; long enough to thread through slotted openings then re-attach snaps to the pack's back. Zippers seem suitable for the pack-not thin and prone to blow/catch but robust and easy-gliding to use without straining. There are lots of little pockets allowing storage of smaller, easy to misplace items too. I found this to be a solid, useful, well-made pack. I liked it so much I bought a second.

I waiver between a 3 and a 4 star. It is a very nicely made MOLLE organization/admin pouch. It has plenty of webbing for MOLLE attachments. It has a removable inner wall/organizer divider. One side is ”loop”, for the “hook” other side of Velcro backed attachments. There’s a bunch organizer stuff, but it’s too thin. It is only like an inch thick. Meaning you can only put flat stuff in it. And if you’re going to do all the inside possible places to put stuff…it will have to be very thin. Now having said that, I did keep mine, because I’ll use it for office type stuff. Pens, pencils. It does have MOLLE on the outside. So I can carry a light on it, and maybe a small knife. There’s an outside pocket. You could use for cards. It could be a wallet. Kinda big. …but you’d definitely have room for everything…lol

Fantastic quality. Excellent fit and finish.

It’s a slim bag with relatively modest capacity but you have a lot of options to keep everything organized inside. Lightweight. I bought two and divided up my gear, one wash kit and one tool kit. The partial-open cords are a great idea. Probably the best way to use them is to have 2 or 3 inside or outside a backpack and specialize by use. Well-made

I'm active duty army. Bought this as a weapons cleaning kit. Got it, packed it, went straight to the field. It held up well and fits nicely in my pack, or on the outside. Elastic is strong and the pockets are durable. Outside feels good and held up to weeks of abrasion going in and out of vehicles and the ground without any signs or wear. Holds all my picks, bore snake, star chamber pads, little bottle of CLP, and wipes as well as a boresight, small light, and batteries. Excellent product!

Great pack, great adjustablility. Thin unlike many bulky packs, many many alternate uses. Stitching looks good, ill update if that changes.

The product has solid build construction, but what I would consider some limitations and design flaws. Many similar cases/pouches from other manufacturers expand more in thickness when filled. This product doesn’t have that kind of thickness expanding capacity and is most compatible with relatively flat shaped items. Part of this limitation is because the elastic retention webbing runs in the same direction on both sides causing items to compete for space. A 90 degree orientation change to one side of the webbing would likely remedy this. Also, the center “divider” sleeve with elastic webbing tends curl up and bow noticeably if loaded with thick items. It works great for a few standard capacity 9mm magazines, a flat roll of duct tape, folding knife, etc. Useful in a range bag I would think. It would probably also work well as a small tool kit. The rear pockets are generously sized. They would be even more useful with a little elastic at the pocket openings to retain items a bit. I thought about returning the product, but it’s solidly built and with the right shaped items it will work well and be a decent value for the price I paid. IMO, it’s a buy if you like the price and put the right items in it.

I've come to expect excellent products from *sigh EXCELLENT ELITE SPANKER. Don't worry about their name, their stuff is legit well-made, tough, and most importantly, well-stitched. I have about 8, 9 of their pouches and not a single one has had bad stitching or substandard material. No fraying nylon, not even loose threads. The fabric feels thick and durable, the zippers are smooth and solid, everything is just put together well. On top of that, their MultiCam stuff appears legit. At the very least it does display good NIR properties, which is good enough for me. This admin pouch is a tiny bit on the tall side for a JPC2 (which is what I bought it for). The internal divider somewhat gets in the way but thankfully it can be removed. However it opens up beautifully in front of you if you run it on the top of your carrier (see picture), so if you do a lot of admin, this is an incredible, incredible pouch.

「TOKYO CRAFTS フロートケース 小物収納 直置きできる 大容量 MOLLEシステム 吊り下げ 調味料ケース オーガナイザー 収納ポーチ 大容量 キャンプ アウトドア」からの乗り換え。ソロバイクツーリングキャンプで使用。ミリタリー系でデザインは良いですね。収納力はポーチの収納幅が短いですが、これがミソで実に収納性良く薄く納まるため収納にはめちゃくちゃいいですね。コンパクトにするならこの商品はお買いです。あとMolleモジュールとDリングとウェビングが中外にたくさんついているためバッグの外などにも取り付けられ丈夫です。一番良い発想はサイトに直接調節可能な紐により、90度または全開にすることができますので食事中に開いたままギアを用意することができてとても便利です。商品説明にもありますが、多くのギアを本当に収納してくれます。

Love this pouch. Top quality, holds a lot, and can be adjusted to stay open.

Great pouch, excellent material, compartments, design, ykk zippers, codura. All 5/5 -fantastic. but I can’t give it 5 stars. I do feel my expectations we’re different. Because I thought this was smaller. This is more of a pouch for a backpack. I wish there was a smaller option (maybe 2”) to mount on the front/top/centre of a carrier. It’s similar to average sized ifak, maybe bigger. It’s awesome, I’m sure it’ll have some use eventually… just not in front middle of my carrier (gets in way of my ptt). Honestly, This is the closest I could find, and that says a lot. There really is a lack of comfortable sized admin pouches to mount on front. If you’re like me you probably bought this thinking is was smaller than an ifak pouche. It’s not.. & honestly I don’t want to return it either because it’s great. So no regret but doesn’t match my need. If excellent elite Spanker ever makes a smaller- sister version of this pouch I’d buy it asap.

A Quality product. Arrived on time and worked perfectly as described.