30 Piece Air Accessory Kit with Storage Case

Although the product itself appears to be exactly as expected and I anticipate it will be a good purchase, I am extremely disappointed in Amazon. The was supposed to be a NEW purchase. Instead, I got someone's used item. In the picture on the site, a customer posted the way it looks brand new when received. The case should be shrink wrapped plus the additional 5 items arrived outside of the case in a separate (newly sealed) package. The case I received was not shrink wrapped and the additional 5 items were in a zip lock type bag. Initially, I didn't think much about it until I noticed that one of the items (from the five) had some kind of sticker partially affixed to it. It appeared as if someone tried to remove it, but left most of it on the part. As I looked at another part, there was residue of the white PTFE tape left inside the threads. As I began examining the parts in the case, I noticed some black residue in a few of the parts as well as some wear marks on others.Had I purchased a used item, I would have been fine with this. But, this is NOT what I paid for. I am returning this item today and have requested a replacement of the same. I will be happy to update this review once Amazon makes good on my order.*********UPDATE**********Amazon fulfilled the order as requested and I am satisfied with the purchase. I've already used a few of the parts with my air compressor and they performed just fine. Thank you to Amazon for quickly and easily replacing my order and to the manufacturer's representative who also responded to my original post. It is good to see that a representative of the manufacturer follows posts and comments to rectify customer issues as opposed to ignoring them as many companies seem to do. That is good customer service!*********END OF UPDATE***

Walmart had the same collection for about the same price. The air gun attachment is low pressure, which is good for blowing up balloons or basketballs, but not good for blasting out metal shavings from a cylinder head or other high pressure cleaning applications. The plastic case arrived with a crack and eventually broke, but duct tape fixed that. All the quick disconnect pieces are nice to have, and seem to not leak so far, but there are really only 2 attachements: the air gun and the tire inflator. It works for everything I need around house, but is not heavy duty and would probably break if I used it every day.

This is good for what you pay for. This is my extra set for at work. So if others use it or they get lost I'm not out a lot of money. Its definitely worth what you pay for. It does the job!

This item is OK. The couplers are a little on the cheap side, and you have to work a litter harder to screw them in to ensure a good seal. If you are a average home repair, infrequent user of this type of tool, it will meet the need. Not for professionals, or someone who would be using on a daily basis. If you plan to use these adapters on a daily basis, step it up, and look for a higher quality set.

I have needed a kit like this for a while - wish I had it sooner. I just wanted the one blower attachment, but the price for this kit was equal or less than that part separate. All the parts are well made. I recommend this as an add on to your compressor.

An all brass setup would have cost me almost as much "for each fitting" as I paid for all of this, but these steel fittings serve my purposes well. Would the brass fittings have been better, of course they would (an Audi would probably work better than my Chevrolet too, but I don't want to pay the difference there either). These fittings will get you started while you are determining your long term needs.

So ALL the fittings work PERFECT. Yes. They are not too of the line with perfct finishes but the all work great. I would avoid using the tire pressure gauge however but who cares. All the fittings and couplers included are worth way more than its actual price. Not a single complain.

What seemed like a good mix of fittings and accessories turned out to be a waste of money and a bigger waste of time (and teflon tape) problem solving. Many quality issues were apparent and problematic. After taking a close look at the pieces, and pinpointing the leaks with soapy water, here's what I found • Quick-Connect: Both female QCs leaked to various degrees with all of the male QC couplings. Jiggling the inserted male piece changed the rate of leaking -- sometimes for better, sometimes worse. Why? Because the small part inside the female coupling that is supposed to align with the round hole on the male piece ISN'T ROUND. Also, some of the tips of male fittings are poorly machined, so there's no way to ensure a tight seal. I had no luck trying to work around the problem with creative uses of Teflon and silicone tape. Bottom line, don't plan on using the QCs unless you're okay with a leaky line • Threads on most fittings: Other reviewers fairly noted the need for generously wrapping the fittings with Teflon tape. Looking closely, the reason is clear: Sloppy machining and finishing! The threads are covered in burrs making the grooves uneven. Spending some time and effort on the male threads with a brass brush finished the work that the manufacturer should have done to enable a tight seal with Teflon tape. • Tire gauge: Inaccurate by more than 10%. Checking my car tire, the Primefit gauge measured 33 PSI while 2 other reliable gauges showed 37-38 PSIAfter extra work and tape, I was able to make use of the fixed fittings, but the rest of the accessories were made too poorly to be useful. At this point it would be too much trouble remove and return the few parts I was able to salvage, so I pitched the rest and am left with a small number of relatively expensive fittings. I recommend steering away from this product, and buy the pieces you need from a manufacturer with reasonable quality control procedures