Medium Fine 2-Part Self Hardening Putty, Black, MPP-5, 4oz Pack

This stuff is wonderful! It starts out sticky, then turns to smooth clay - almost like FIlm-o- , and then it starts to harden, but there is a window of about 10 minutes where you can make it into something. It doesn't stick to your hands, like some of those other liquid metal or putty clays. Comes off your hands with water and a bit of scrubbing. I can only attest to its sticking to glass, which it does with great adherence, however, it is a bit brittle, once dry. You can snap it off with pliers or break it with a hammer if three dimensional. Of course, if you're using it to smear all over an engine or a drain pipe, etc., your project probably won't have arms and legs, so you should be just fine.

Has a good working time- just right between too long and too short. An overnight cure is the best for a powerful bond. Dries to a real black color. I have used the competition that is everywhere, this is better in every way.

The stuff is fantastic. I originally bought it for making eyes and buttons on a snowman turned on my lathe. Perfect. Then, I was turning a bird feeder out of scrap wood and a big chunk broke out of the rim. Normally, I would have tossed it, but used some Milliput putty instead. Worked like a charm, been outside in the weather for months now with no sign of distress. Next, the lid on our auto opening waste basket in the kitchen broke off the hinges. No was glue would fix it, packed a bit of Milliput putty and re-drilled the screw holes, and good as new. Next, the seat on our picnic table had a rotten spot in it, filled it with Milliput after seeing how well it held up on the bird feeder, and worked a treat. This stuff is now a mandatory item in my shop.

Easy to use. Used to repair my crack in my granite. Only downside is the left over product not used dried up even though I put it in a ziplock bag right away minus a star for that

I got this pretty quickly. I needed it for a repair project on some wood. I've been using the stuff for years, and it's just fantastic. It takes a little effort to make sure it's fully mixed up, so follow the instructions on the box. And when you're done with it, don't just wrap it back up in the plastic. It's best if you wrap them separately in their plastic, then put it in a Ziploc bag to help preserve the life. Works great for modeling, as well as filling gaps and wood or plastic and it bonds well. I prefer using this over liquid epoxies and most cases. I've never tried using a metal, so I can't say how well it bonds on that.

I just came from the workshop where I was using the Milliput epoxy putty in black. Mixing is easy using equal parts of the two "Tootsie Rolls". Just knead a pinch from each in the amount needed. The application for me was to fill in some worm holes and cracks that were in some spalted maple boards. For my purposes, the material has to have certain qualities; hold fast in the voids, sand flat easily, not shrink, have no plastic or metallic look, and because it was going into spalted maple having black lines through it, be black. Milliput scored 100 per cent on each of these tests. After sanding it flat with the board, the material became a bit more gray than I wanted. However, after wetting it it, the black color I wanted came back immediately. Milliput has a great product in this epoxy.

I originally found out about this stuff on a youtube video out of the UK about repairing terracotta pots, but also learned it could be used for so much more. I've used it on a broken terracotta planter lid but also on a cracked and leaking plastic christmas tree stand and then ordered this black color to repair a plastic and metal oven door handle that had snapped in two. It can be shaped like clay and smoothed with water. I had tried Sugru in the past with disappointing results, but while this stuff is not flexible, it is so much better for repairs.

Anyone interested in the Gundam or Warhammer hobby, look no further. You like Green Stuff, that's fine too.