OWOFAN Kitchen Faucet with Pull Down Sprayer Brushed Nickel Stainless Steel 1 Handle Pull Out Spring Sink Faucets 1 Hole Or 3 Hole Dual Function for Farmhouse Camper Laundry Utility Rv Wet Bar

I absolutely love this kitchen faucet. The design is very nice and honestly adorable — it instantly upgraded the look of my sink. The LED temperature indicator is one of my favorite features: blue for cold, green for warm, and red for hot, which is a great warning sign when the water is very hot. It’s super helpful and looks really cool at the same time. Installation was very easy and straightforward. I had no issues setting it up, which was a huge plus. What really surprised me is the quality — this faucet is better than the $250 sink faucet I had before and ended up replacing. It feels sturdy, well-made, and durable. For the price, you really can’t go wrong. I honestly feel like this faucet will last longer than my previous one. Overall, I highly recommend this faucet. Great design, great features, great price — nothing to complain about!

UPDATE the next day: I discovered that once you unhook the handheld part from the holder, you can spin the holder back out of the way, and the force of the spring actually aims the water directly at the center of my sink basin! So, problem solved! I think this is actually an easier way to use it as well, as you can just reach up and direct the water around much easier than having to pull it out of the holder first. Even on full blast, the force of the spring keeps it aimed at the center. This is a very nice faucet at an amazing price. I replaced a "Water Ridge" faucet I'd bought from Costco a few years ago, which developed a leak under the sink. I took the opportunity to upgrade to this stylish design. It was super easy to install, and took me more time to remove the old faucet than to install this one. It uses standard 3/8" plumbing connections. The instructions don't have the best English, and one of the steps was already done for me, which was confusing at first. But neither of those is a big deal. The water flow is very good and I think it outputs more volume than my previous one, as I get hot water without waiting as long as with my old one. What I did notice though when rinsing dishes, compared to my old faucet which was a more traditional design, is that when I pivot this faucet over either basin of my dual sink, because of the length of the arm (which is 9 inches according to the diagram), it's not possible to position it in the center of either basin of my sink. Look at the picture of it in my sink to see what I mean. So the best I can do is to position it at a place where I can rinse dishes without bumping into the side of sink or splashing water all over the back of the sink. It's certainly OK, and of course it's not a fault of this faucet. But I would advise anyone who is putting this on a dual sink, to see if a faucet with 9 inches of reach is going to reach the center of your basins. It was not something I though to consider before buying. Next time I will probably look for one with 12 or more inches of reach, if that exists. Even with 9 inches, it still looks fine, and is perfectly usable, just not ideal.

Our faucet bit it, so I came on here to find a replacement. For $40, I was expecting okay, instead, I got fantastic. Both our plumber and my husband agree it’s a steal - gorgeous, easy to install and use, and does the job. If you are on the fence, hop off and buy this - it’s worth it!

Please note that for installation you are going to need a good quality basin wrench. If you don't know what that is, have a friend who does install it for you. It's important to get a tight fit so the faucet doesn't swivel. That said, it's been great. Wonderful to be able to rinse pots with a nice, powerful shower of cold or hot water, and to be able to reach every corner of the sink to rinse it thoroughly. Also nice to be able fit, say, a 12-quart stock pot under the faucet for cleaning or filling One notable issue is the screen between the nozzle and supply tube. Where the two thread together is a combination screen and gasket ring. If any particulate matter gets into that screen, the faucet will leak at the junction between the sprayer and the supply tube. Take it apart and carefully remove and clean the screeen. Re-assemble and all will be well until the next time your water system hiccups particulate matter. Having done that quite a few times (well water system without a filter on the main), the little gasket/screen is now pretty damaged. I do susptect that getting a replacement will be a challenge. I will contact the supplier with an inquiry as well as checkiing the local hardware store. I'll update here with results. But... for the price, it's good. You could buy a fancy-#22##d one from Moen with a magnetic connection for around $300, but, other than easy replacement part availabiltiy, why? And we'll see on the part availability issue. Stay tuned. Cheers, -- netizen UPDATE 21 March 2022 10:59 PST Docking one star. Had some issues with the well here and line became contaminated with bits and pieces of the broken pump impellers. Clogged the little filter on top of the spray head and had to clean numerous times. Filter screen washer basically disintegrated. Not surprising, but now I need a new one. Small part. Contacted Owofan and, after about ten days, no response. I guess I'll have to rig something up with a faucet screen and an 'O' ring. I'll update again if Owofan responds. -- netizen 17 August 2023 09:05 PST UPDATE: OK. I found replacement screens available and installed. No problems since, but now the inverted "J" hose has developed a leak after a few years of daily use in a home situationl. Owofan never got back to me on the washers, so I imagine having the hose replaced or gettinng a replacement would not be possible. I've ordered a variation of the original with an extensible hose that was on sale recently to install in place of the original. I do appreciate having this faucet over the fixed-curve faucet that was in the sink. The faucet is very useful and makes doing dishes and cleanup after cooking that much more pleasurable. Despite the limitations, I'm giving back one star because I just like having these faucets in the sink. The price is so reasonable compared to the major brands that I guess a little extra plumbing is worth it. Cheers y'all, -- netizen

This was a breeze to install and the brushed nickel looks spectacular in my kitchen. I have had NO problems with the seal or any chipping. For the cost, I am giving this a no-brainer 5 star rating. It would be well worth it at double the price.

Easy installation instructions Works beautifully.

✅ LO MEJOR: • Se nota robusto y de buena calidad en los materiales. ❌ LO PEOR: • La manguera del grifo es flexible, pero para mi gusto, le falta un pelín aún. EXPERIENCIA PERSONAL Hemos cambiado la fregadera entera. La de serie era bastante fea y se estropeaba muy pronto. Este grifo encaja perfectamente con colores oscuros o claros, pues tiene un tono Níquel bastante neutro. Los materiales se ven robustos. Cuando abres el grifo o lo desplazas, se nota la rigidez y el buen encaje que tiene en la fregadera, a pesar de tener un mecanismo de fijado super sencillo pero a la vez eficaz. Le falta un pelín de flexibilidad a la manguera, para mi gusto, pero pronto te acostumbras a la pequeña fuerza que has de hacer al mover la manguera. Al tener el muelle, que es bastante gordo, se mantiene muy bien en una posición, fuera de su punto de anclaje y eso hace que sea un pelin, casi nada, más dificultoso de girar y manipular que el otro grifo extensible que tenía. Prefiero este mil veces igualmente. La instalación es super sencilla. Una rosca en la parte inferior del grifo que se une con la parte negra que vemos en la foto, debajo de la encimera. Bien apretado y eso no lo mueve nadie. En definitiva, un buen grifo. No le doy la 5ta estrella por ese pequeño motivo. Si esta información te ha ayudado a decidirte, ya ha servido de algo mi ayuda. Muchas gracias. :-)

The product was good as expected

ممتاز جودة رائعه وسعره ارخص من السوق

Je suis mécanicien et je sais donc de quoi je parle... L'écrou de fixation ne correspond pas à celui montré sur la notice. Il est beaucoup trop court. J'ai eu un mal fou à l'engager dans la base du robinet. J'ai fini par y arriver au bout d'une heure en renonçant à mettre le joint fourni entre l'écrou et l'évier. Résultat des courses : l'écrou n'est vissé sur la base du robinet que sur environ 2 millimètres, ce qui est bien évidemment très insuffisant pour assurer une tenue à long terme de l'ensemble. J'appelle ça clairement du f**tage de g***le. Par ailleurs, le robinet est beau et paraît de bonne qualité, alors pourquoi tendre le bâton pour se faire battre ?

Looks great in my kitchen. One year later, no issues