31.5 Inch 28 LED Strobe Light Bar

Your browser does not support HTML5 video.  Very bright for the money. Sturdy Quality. Comes with two side mounted metal brackets and a set of nuts and bolts for mounting. It does need to be hardwired. It comes with two ring terminals on the end of the cable (negative/ positive) . I just cut them off, extended the wires and added a inline fuse purchased at a autoparts store, and hooked it up to the battery. Good to go!

I bought this traffic advisor after reading some reviews and looking online.. I work with law enforcement agencies and fire departments for media relations, I'm often on the side of the road or parked in someone's driveway or in their grass so I wanted my vehicle to be visible from the roadway. I installed the light in the rear deck of my 2017 Tacoma and it pierces the factory tint, it isn't TIR however the beam is visible from the sides and directly behind. I was very surprised with how slim the light was and the construction of it, it does have a few rattles I question but I don't see or feel anything loose but we will find out later on as I use it. At the moment, I suggest this light and will followup if I have any issues. I also appreciate the customer service being a phone call away, I had some questions and was easily able to get ahold of them and the female that answered was more than happy to take actual measurements of the product while I was on the phone.

First off. I am NOT one of those people that receive products for free or at a discount in exchange for a review.Now then... The good. It works, no issues with mine as far as functionality. All flash modes work and all the lights work.Where it needs improvement...is that i wish it were twice as bright. Is it bright enough to get attention, yes. Bright enough for day use or for any emergency response, towing or construction use? No.It could also benefit from better quality momentary(flash pattern) and toggle switches(on/off).And finally the way this bar is constructed causes it to rattle if you interior mount it, it gets annoying. This is due to the plate that the lights are mounted to. It just loosely slides into the aluminum housing and there is nothing to prevent it from rattling. I plan to add clear caulking to resolve that issue.This also means that this light at best is only water resistant. Unless like me, you are going to add caulking to seal it up.Now despite possibly sounding like this might be a bad product, keep in mind that i purchased this for like $45. I wasn't expecting the world here. For the cost, its a decent product.Update- I added clear caulking in the spaces around each light pod and dont have any rattling noise now.

Light stopped working while on a call to help a customer. It had been installed for about a week or so, and inside the vehicle, so no chance of light getting wet from rain or whatnot.Upon contacting Xprite they asked for a video which I sent vut it was not to their liking soIve still yet to receive my money for this light.Customer service has been a joke, and right now dealing with Amazon to try and remediate the situation for nearly TWO MONTHS.If looking for a lightbar find a reputable company. One that will actually stand behind their product and not gice you the run around.

I ordered this light bar, and it didn't come with a certain piece (which I thought it would come with)I wrote a review and rated 2 stars, the company reached out right away and fixed the issue asap. This is my updated review , this light bar is great, it's actually my second item buying from them...Will definitely continue to buy from them, the costumer service alone is 5 🌟!Highly recommend!

Just as advertised! This bar is extremely bright! I like the modes... however... I opted to use my own controller with it instead of the inline power and momentary switch that came with the unit. Easy to install and well worth the money spent!PROs: Affordable, Bright as advertised, easy installation with basic hand tools, good functionality with 7 modes. Light weight and sleak design.CONs: The LEDs used are of a cheap design and materials, which will definitely effect the longevity of the lamps. Short lifespan on led modules. Not specific on the need for the extension cable and/or lack of a 12v cigar plug. No visor to help minimize flashback. Lack of pattern indicator.Would I recommend this? Yes, especially for the volunteers and other first responders as well as contractors that our budget oriented.Note: spend a little extra and purchase your own controller that way you are able to customize your own flash patterns and or have an indicator allowing you to know what pattern you were using If unit is mounted out of view.

Your browser does not support HTML5 video.  Very bright. Video is through 5% black tint and still super bright. Easy install. Buy an amp intallation kit and use the 12v power cable to get your power to the trunk for rear installMount brackets are a little weak. You will have to engineer your custom install. Mine is on the rear deck. I cut wood blocks to mount it higher.

Your browser does not support HTML5 video.  Love this traffic light. Installation was very easy. For my application, I was installing on a Kubota b3200 tractor and it fit great between the ROPS. My only complaint is that the wires come out the side of the control unit instead of the back so you're going to see wires no matter what (unless you replace the switch). Traffic patterns are cool and I like the last one, (all on) to act as a normal light bar.

Recieved this yesterday and was disappointed to see a cheap plastic switch attached to the power cord. Not sure why these even come with those terrible cheap switches as you need to cut them off to install them anyways. In any event, luckily the flasher unit is built into the actual bar so cutting off that switch is no problem. Once removed you have a red positive wire, black negative wire, and a white trigger wire [ground short] that changes the flash pattern. You can wire this to a rocker switch and just short aire to flash pattern you like and tuck white wore away, or use a rocker switch and a spring loaded switch to be able to change flash patterns as needed. Solid construction for inside of vehicle, not sure how long it would last on outside if vehicle. Installed inabout an hour if you know wat yoir doing. Bright lights and remebers flash pattern even after disconnected from power supply.

Super bright and many settings for flash pattern. Had trouble finding a good spot to mount it in my tundra but that is not an issue with the light more an issue with my truck. Power supply is not long enough so I had to buy the extension to help it reach from the back of my truck to the front.

I installed this on my van as a extra hazzard light for the side of the highway, used it mayne 15-20 ti,es for no more than 5 mins at a timw and have 4 leds burnt out already,, want to replace it now, but which brand to buy ...Could be a 1 OFF problem but - QUALITY.? NOT SURE..

The light works but the seven functions will not work spent two hours installing it nicely on a Kabota side-by-side china garbage.

Very brite. Excellent product, recommend to everyone.