What is the difference of this vs. the Ultimate Compound vs. M205 Polish? On a newer car -what should be used?

First, you don't say whether you're using a machine or applying by hand. Machine might not require as aggressive product. Second, it all depends on the surface condition. Always try the least aggressive, i.e. Ultimate Polish/M205 first. If that doesn't remove swirls, etching, etc., drop down to Ultimate Compound/M105. Then, refine surface with UP/M205 and follow with a pure wax such as Meguiar's Ultimate or my favorite, their NXT 2.0. Meguiar's Ultimate Compound is the consumer version of M105 Ultra-Cut Compound. Their Ultimate Polish is the same to M205 Ultra Finishing Polish. Both M105 and M205 are slightly more aggressive that their consumer counterparts. It's also my understanding that Ultimate Polish has more polishing "oils" than M205. They all use Meguiar's Super Micro Abrasive Technology (SMAT). Simply put, they shouldn't induce scratches/marring if properly applied. Also, if you're investing this much labor, you should remove the bonded contaminants that seem to be present on most brand new cars with a Clay Bar Kit. You'll be blown away at how smooth and clean the surface gets. It's safe, fast and is the foundation for a properly detailed surface.

Ultra-cut vs fine-cut vs medium-cut and vs Ultimate compound: which one cut the most and the least?

I used Meguiar’s “Swirl Remover #9” on my ’07 Escalade with white diamond tri-coat paint. This WD3C is notorious for it’s beige appearance taken on with age. Mine was really ugly and I’m not sure if the intense solar heat in Arizona and Texas, where the vehicle has spent equal halves of it’s’ life, or the air pollution it has been exposed to contributed to the discoloration. (Most likely there is a just a problem with this coating GM put on the vehicle) Owners much farther north report the same problem with their Cadillacs with the same coating. I used the #9, a brand name random orbital buffer and an orange applicator pad. I’m not a professional so it seemed starting with a fine formula would be a good starting point. The #9 compound did make a very noticeable improvement with favorable lighting but in direct sunlight it still has the beige appearance, perhaps not as intense as it was prior to the buffing/polishing. At night or on cloudy days the finish appears much whiter. My final step was using the same machine and a black pad to apply Super Hard Shell wax and it is wonderfully shiny plus the water beads up on the surface as good or better than anything I’ve ever used. I had a ’02 Suburban that was Shasta White when I first bought it and remains just as stark white when I saw it yesterday. BTW, the #9 did a good job of removing some minor scratches but only lessened the deeper ones. The finish did not have any swirl marks so I can’t testify how well #9 removes those but I believe it would be very effective unless the person who made them buffed the car out in Phoenix during a haboob.

why I still got swirls using a xp7424?

First make sure you wash and clay bar the car. Then use one dime size of m205 per square foot so in a 2 foot by 2 foot area which means you need four dots of product. Then with your xp7424 make 5 passes at 4 seconds per foot. Set your speed to 5 and use a white Lake Country pad. If you go too fast you're not doing much work. Each pass mist one squirt of water. At the end wipe with a microfiber towel. If the swirls still exists then you'll need something stronger like m105 with an orange Lake Country pad. Same process applies with m105 then you'll need to repeat the same process and finish with m205.

how does this compare to the Meguiars G17216 Ultimate Compound? Which should I buy with my new Porter Cable Polisher?

Answering for future folks who come across this.. If you have an older car that hasn't been well cared for and has a lot of swirls and scratches, the PC 7424xp and M105/205 combo is the way to go. I tried the G17216 with a Orange Hex logic pads with my 7424xp and was not pleased with the results. At all. To many fillers and crap in 17216 and it left a lot of the deeper scratches and swirls behind. Picked up the 105 and much happier with the results, deeper swirls and most but all of the deepest scratches are gone.. It cuts well and with the 7424 you would have to TRY to damage your paint.If you have a newer car and just fine swirls on the clear coat. Then I suspect the G17216 would be fine. But for the deeper swirls and scratches I wouldn't waste your time with anything but M105.

Desertcart Logo

交付 Malaysia

获得最佳体验获取应用程序

下载应用程序

我们从

阿联酋
英国
印度
美国
日本
KOREA

客户服务

关于我们

客户支持

常见问题

产品是真实而真实的吗？+

是的，所有产品均直接来自美国，英国，阿联酋和印度的授权零售商。我们保持严格的质量控制过程，并在运输前验证每种产品。所有项目都有适用的制造商保证，并由我们的标准退货政策涵盖。

交货需要多长时间，这是可靠的？+

送货时间因目的地国家 /地区不等，通常从3-9个工作日不等。每个订单都可以通过我们的系统完全跟踪。我们处理所有关闭范围，并使用可靠的快递合作伙伴进行最后一英里的交付。您将通过电子邮件和我们的应用程序定期收到有关您的订单状态的更新。

什么是凡人车？从安全订购安全吗？+

自2014年以来，落伍车是一个国际电子商务平台。我们每天在全球范围内安全地处理数千个订单。每个产品都会在交付前经过我们的质量验证过程，我们提供端到端订单跟踪，24/7客户支持以及全面的回报政策，以确保安全的购物体验。

产品定价如何计算？+

我们的价格包括产品成本，国际运输，进口关税，关税和当地交货费用。我们处理所有海关和导入程序，确保交货时没有隐藏的费用。 Pro会员将获得额外的福利，包括免费送货。

RM386

关税和税费包括

Malaysia店铺

免费退货

30天对于 PRO 会员用户

15天无会员资格

安全交易

ChatGPT - opens in a new tab Perplexity - opens in a new tab Claude - opens in a new tab Grok - opens in a new tab Google AI - opens in a new tab

TrustPilot

TrustScore 4.5 | 7,300多个评论

Anjali K.

产品质量出色。正是我的工作所需要的。

1 个月前

哈立德 Z.

从订购到送货的体验都很棒。强烈推荐！

1 周前

查看所有TrustPiLot评论

Manufacturer	Meguiar's
Brand	Meguiar's
Model	M10508
Product Dimensions	4.14 x 20.96 x 9.14 cm; 273.97 g
Item model number	M10508
Is Discontinued By Manufacturer	No
OEM Part Number	M10508
Item Dimensions L x W x H	41 x 210 x 91 mm
Item Weight	274 g

Meguiar's M105 ミラー艶出しウルトラカット化合物 8オンス M10508

细节

描述

规格

有问题吗？看看别人问了什么

常见问题