SOLUTEK Metal Pedal Footswitch Topper with 3 Screws and Rubber Insert fit tightly on very common pedal switch(3/8"10mm) Red + Blue + Gold 12 Pack

Bought these a little expensive but I like the fact they have 3 screws, to hold on better, I was working on my Pedalboard and have a couple Of TC Electronic pedals thought that would be a problem because the pedal button was was !/2 inch, but if you take out the rubber insert with works out fine, if you have trouble pressing on the button loose it up a little, and make sure it doesn't come off, and test it until i clicks on quickly

Works well

These buttons seem sturdy and are decently easy to apply, but they have one major flaw: they are too deep to use with many modern pedals. They work great for large button mainstream manufacturers i.e. MXR, EHX etc, but for many new or boutique pedals that have a shallower or narrower footswitch, these won’t work as is.I got these to specifically to accommodate one particular pedal: the Caroline Meteore. Unfortunately, the newer style foot switches on this pedal are very narrow and don’t work with the cheap press-on plastic footswitch big buttons, so I bought these since they have screws to tighten them down.Unfortunately, the buttons are so deep that when I finally cranked the screws down enough to get them to stay on, the depth of the button prevented the pedal from engaging. Once I plugged my pedalboard in, this same problem presented itself on pedals with seemingly normal sized foot switches but shorter travel such as the JHS Crayon, Fairfield Circuitry Barbershop, and even a TC Hypergravity Mini.I took all the buttons off and was about to return them when I remembered I had a box of rubber o rings lying around, and decided to try them as spacers to take away some depth on the inside. The 6x2 mm fit best. After a bit of maneuvering and tightening down the screws as far as they would go, it worked! Time will tell if they stay on, but I’m going to keep them and hope for the best.I’ve never tried Barefoot Buttons and by the looks of them they might be a bit shallower, but then again, they may not. And you get 12 of these for the price of 2 barefoots so I can’t really complain. So if you’re going to get these, grab a $10 box of rubber o rings as well to make sure they work with all of your pedals. If these came with a few 1 and 2 mm spacers to reduce the depth they would be perfect.

As advertised, easy to install, super sturdy/quality metal (had been warned about cheaper plastic versions), worth a few extra bucks to get the metal ones. Nice to have different colors available, haven't had any fall off or any issues in the year or so of being used. I was aware that some buttons on certain pedal companies might not be compatible with footswitch toppers - you can see in the pic that my SansAmp in the upper left wasn't compatible (short, wide button), but it sits far enough away from the others to not need. Can't imagine life without them now!

These are awesome! They screw down onto rubber on to the top of the foot switch. This is a very positive connection as well as to not mar the foit switch. Outstanding design. I was able to match the color of the foit switch to the color of the light(s) it lights up when engaged. Although you can come ip with your own color scheme ro suit. These privide a bigger surface area to find the seitch with your foot. Very comfortable. Bottom line, I wholeheartedly recommend these and will buy again!

After careful consideration, I chose these Solutek pedal buttons. As you can see I needed almost 2 dozen. (I have another multi-stomp with 4 more switches.) The ones I saw at my "go-to" online retailer were about $10 each. So these were the most comparable and saved me $175! This is something that you can pay a bargain price for since they're not a necessity. I just wanted them because I usually don't wear shoes around the house.It's a bit tedious putting 3 little screws into each one but I suggest you get a little cup, pour those suckers in, sit in front of the TV and have at it. Took me about a half hour to do all 24. Just keep something under them in case they drop. I lost 2 in my carpet that only the vacuum cleaner will find. They fit all my pedals perfectly and they all work great. As you can see my board has a variety of brands so not all the switches are the standard "mushroom" type. The Wampler Latitude and my midi controller for my amp (big black switch at bottom) have a slightly slimmer profile. But they stay on and work. The only caveat to consider when buying these solid buttons is if you have lighted foot switches, i.e., Line 6 Pods, etc. They will block the lights so you may want to opt for plastic ones. But I couldn't find any transparent ones that had screws to hold them on. Luckily none of my pedals have lights under the buttons. I bought 2-12 packs @ $20/each. So at $1.67 apiece, they are a great deal. And if more than 2 of them fall off, I guess I'll go back to wearing shoes when I play.

These are just what I needed. They were the perfect fit for my zoom b6 pedal!

I added these to my midi commander to make it a little easier at a glance to hit the right switch. I really like the design, and once installed, they seem sturdy enough. The reason I knocked off 2 stars is 2 issues I faced that to me were frustrating. First, the send the wrong size hex key. Luckily, I do all my own work and had a set of hex keys with one that was the right size. I almost stripped one of the heads before I realized what was going on. And lastly, one of the screw holes stripped pretty easily. I don’t believe I cross threaded. I believe the hole wasn’t properly tapped during production. Yet again, another little detail that matters to me.I did get all of them installed in about 5-10 minutes with minimal effort and I do think I’ll have a much easier time on stage identifying what I need at a glance.

Better quality than expected for the price.

Es justo lo que viene en la foto, los utilizo para proteger mis pedales del polvo y arena de playa, se ajustan con una pequeña llave Allen

Pretty pricey for not being able to stay on pedals.. they use rubber with set screws to tighten… if you tighten too much they get uneven on you and when you activate pedal they shift around… if you tighten to loose they don’t stay on… and for all of my pedals I have to put spacers in because the button bottoms out and doesn’t allow you to activate the pedal as easy…. Not impressed for the price… would NOT recommend

pedal board was getting a bit crowded and footswitches harder to step on... this are great quality, have 3 screws, and (if you care) look pretty slick

I'm very happy with this purchase. Better than I expected and I didn't need to use the set screws! I tried these on an MXR EVH Phase 90 and Carbon Copy, a Klon clone, a Nux Duotime, a few BYOC clones, a Joyo overdrive, and a few other pedals I have laying around. These went on snug and wouldn't come off without some effort. If you're a bedroom player, stepping on these with bare feet is much more comfortable than a plain button. Easier on your hands, too, if you're the type that has a pedal or two on a table instead of the floor.. For live playing they might still be good without the screws but you might want to put those in for added security. Just keep in mind that it's a 3-screw system. Tighten each screw a little at a time to keep even pressure so they don't end up sitting wonky.The twelve toppers come in a plastic clam shell case that you can repurpose, and includes a Ziploc bag with two allen keys and set screws. Mine came with a few extra screws.UPDATEI'm rearranging my pedals so I decided to put the screws in.. The toppers sit crooked and now they won't allow the footswitches to engage. Took out the screws and everything is fine again. So, toppers work as long as you don't put the screws in.