BAFANG 48V 500W Front Hub Motor - Ebike Conversion Kit for 20"/26"/700C(29er Compatible) Front Wheel Electric Bike Conversion kit with Battery& Display Options | Hub Motor Kit for Mountain/City Bikes

My bike has the old school rim brakes. This rim seems to shake some when braking. Disc Brake Bike would be Great with this system. I use the rear brake more than the front due to this. I installed this on a tandem bike and I ride with my disable son on the bake seat. Works great even with 400 lbs total weight on the wheels. Acceleration is great. I prefer the throttle that is built like a motorcycle. This system requires you to use your thumb.

This would be a 5 star rating except the 1st kit shipped did not work. After much fiddling everyone agreed the controller was bad. That said, LAS Cycle quickly replaced the whole kit a provided a return ship label to 1st kit return. You can't ask for more than that. - I bought this as a throttle option for my peddle assist ebike, for longer pleasure (not exercise) rides. I did not install/use the kits PAS or brake sensors (functions). I hung the battery/controller under my handle bars in nice bag. I pull everything off easily. I bought the simple Dz40 display. I use a 20ah battery. I am 6'2", 205lbs so the total me/bike/batteries is about 270lbs. I get 20 miles, throttle only, on mild inclines routes, and the battery still measures 47.8 vdc (proper deplete value for loner life multi charge). Product works good/great. Remember, you need to also buy battery, tires, tube, brake disk. I spent about $500. I will report after about 300 miles of riding,

Works well and 500 watts can take 450lbs of load 25 miles pretty consistainly on a hilly route, however the PAS sucks, reason being it sucks is because the throttles power is limited by the pas setting Jul 15, 2025 12:45 AM So if you set your PAS to, say, level 2 just to get low-level assist, and you want a temporary boost with the throttle, you can’t — because the throttle is limited to that same level 2 power. So now you have to press buttons to raise the PAS level just to get more throttle, but then when you pedal, you get too much assist when you don’t want it. Exactly the kind of assist you would want — but only when using the throttle. It just sucks. I ripped off the PAS sensor and gave up on cadence. I just set it to PAS 9 and use the throttle as needed. Basically this controller is limited crap, just by the cheapest display to pair with this controller anything else is a waste of money

I installed this kit on my Schwinn Meridian three wheel bicycle. Everything worked perfectly. Top speed on level ground is 20 MPH just using the wheel. That's fast enough as the three wheeler is not very stable at speed.

Very easy to install. Very fun to ride

only works with their controller- which is not mentioned on the listing

Easy to assemble, fast shipping

Everything came pretty quickly, and quality appears good on all components. The one issue is that the 1t4 cable is considerably shorter than the 9 pin. Because I'm running my wires through the frame of a step-through bike, it won't reach the rear rack-mount battery (which it should be noted has a small compartment built in for the controller so you don't need to use the included controller box. The 9 pin wire, which covers basically the same distance, is long enough to reach, which means I'll have to get an 8 pin 1t4 extension cable or a different 1t4 entirely. It's a niche case though, and since most people will be using a different battery and the included controller box I can't really fault them too much.

Terrible, quit after three months. Not able to return. Very dissatisfied