Size:Z9 Mini *POWER SUPPLY IS NOT INCLUDED* AntMiner Z9 Mini Specifications: 1. Hash Rate: 10,000 Sol/s ±5% 2. Power Consumption: 266W ±7% (at the wall, with Bitmain PSU, 93% efficiency, 25C ambient temp) 3. Power Efficiency: 26.6J/Ksol±5% (at the wall, with Bitmain PSU, 93% efficiency, 25°C ambient temp) 4. Rated Voltage: 11.60 ~13.00V 5. ASIC Chips: 12 6. Dimensions: 206mm(L)*124mm(W)*155mm(H) 7. Cooling: 1x 12038 fans 8. Network Connection: Ethernet (network cable not included) Please note the following: 1. Due to the nature of these products, there are higher than normal restocking fees (usually 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days and the warranty has not been voided by overclocking or abuse. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a return. 2. Each AntMiner Z9 Mini requires FOUR 6-pin PCI-e connectors for 12V DC input (must be very stable power source). There are three hash boards that each require ONE 6-pin PCI-e power connectors and one additional 6-pin PCI-e power connector on the controller. All FOUR 6-pin PCI-e power connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability. 3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. 4. Power supply unit is not included. Bitmain recommends the APW3++ or APW7 for the AntMiner Z9 Mini. 5. Very LOUD! Sounds like a whiny vacuum. 6. Metal clanking or rattling is expected when moving the AntMiner Z9 Mini. The sound is from the hashing boards moving back and forth against the metal frame. This does not mean there are loose parts and does not mean the item is defective.
R**.
good, but old
These are some of the older models, which you can not over clock. It would have been nice to get the newer model, but you can't always trust everybody.
P**D
15000 sols bitch
love it
A**R
Five Stars
The product arrived one day before the scheduled delivery and is working perfectly! Thank you!
L**E
No computer is quiet that hashes this much and stays cool. Reality
Alright... yes its loud. So is a hair dryer. Dont expect it to be quiet... thats not its function. No computer is quiet that hashes this much and stays cool.Reality? This will run reliably in the mid 60's temp wise, and get you .10 ZEC every 17 hours or so... approx 1 coin a week. On 340 or so watts. What are you complaining about? Most folks are paying for 4500+ watts to do the same thing on GPU's.. and a GPU rig to hash this mush is thousands upon thousands more.Not everything is forking.. at at such a low power consumption, this machine will be profitable for awhile yet. Maybe not rich.. but ats only a few cents a day to run, versus $15 a day on GPU rigs that hash equal rates.If you want an easy machine to mine Equihash coins.. and there are several... buy it. Or order one from bitmain.. just be aware that there are costs involved with importing, and who knows with the new tariffs what will happen.
S**N
000 sols/sec is great, and more cost effective than the Innosilicon ZMaster
Bottom line is that Bitmain has dropped their price to $850, and delivers in late August. That is 2 months of mining, which if you are lucky, and not overclocked, you would get about $1000 at today's zcash (most profitable equihash coin that I am aware of). So the lost ROI plus the cost of the unit from Bitmain would be $1850 vs. $2100, and you would save even more on power consumption for 2 months and the hassle that goes with mining for 2 months. Just saying.10,000 sols/sec is great, and more cost effective than the Innosilicon ZMaster. But the ZMater has taken over as the fastest ASIC at 50,000 sols/sec, and with a fraction of the power that 5 Z9s would consume to match this performance. This is buyer beware though. If they fork ZCash and some of the more profitable equihash coins, this will be an expensive doorstop.Also, this seems to contradict itself.."2. The INCLUDED APW3++ PSU will work with the AntMiner Z9 Mini on 110v or 220v power outlets. 3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.4. Power supply unit is NOT included. Bitmain recommends the APW3++ for the AntMiner Z9 Mini."
F**O
So unless your just looking to mine for fun, 2100 for a Z9 is a highly risky ...
I have to concur with the sentiment of the other reviewer. I understand the need for making a profit, but these prices are a little ridiculous considering this will likely be obsolete in a few month (6 months at best). So unless your just looking to mine for fun, 2100 for a Z9 is a highly risky endevour. Also, all equihash ALGO's have already scheduled a fork (Zen in July) or are planning to fork in the coming months. Zcash is the only unknown at the moment, but wont matter if you have all the ASICS of the world trying to mine Zcash. Buyer beware part 2.
B**N
Exactly what is advertised
Showed up two days earlier than anticipated, runs great. Mine actually gets about 11-12 kSols average, not just 10.
J**R
90db for 300w
Sold as home miner, super loud and inefficient compared to z9 from Inno.
TrustPilot
1 个月前
1 个月前
