AMERLIFE 10x12x7 FT Galvanized Steel Storage Shed with Dual Transparent Panels, 2 4-Pane Windows & Hinged Double Doors, Outdoor Shed for Backyard, Garden, Patio, Dark Grey/White

Definitely worth the price. While the metal is thin, once it’s up it’s very sturdy. The instructions were very easy to follow and the shed went together with ease. Everything lined up perfectly. Two people a must to put it together.

Happy with finished product. Things to know, every metal panel has plastic film on it. Took over 5 hours to get all the film off,did not come off easy. Every tiny screw had to have a plastic washer put on. Again very tedious and time consuming. As with anything if everything is not lined up properly it doesn't go together. We thought the clear roof panels were optional,they are not. We were able to put it together with just 2 people, make sure one of you has patience. Took about 16 total hours to put up and that does not include peeling off the film.

Product was warped and bent causing the entire shed to be off and nothing lined up as it should. Contacted the company and they were very helpful. Use caution with the directions. I installed a few things upside down because I rushed and didn't pay close enough attention. lol. The faux skylights and windows really are nice and give you lots of natural light.

Not worth your money!!! The boxes showed up in terrible shape, panels warped and bent, parts are missing, holes don’t line up, the doors are about 2 inches too short, save yourself the trouble!I don’t usually give this bad of a review, there’s always something positive to be found - but not in this case.

It is an ok shed. Metal is very flimsy and is easily dented or warped. Plan on building an interior wood frame to increase strength for longevity. Building took two of 16 hours to finish. Only about 80% of the panels, frame and screw holes lined up seamlessly. There were about 4 panels that needed to be cut and re-drilled in order to be utilized as intended. Instructions were fairly clear. However, I feel that the skill level to build is borderline amateur/novice.

It claims you need 4 people. 😆 🤣 I BUILT THE WHOLE THING BY MYSELF IN 16 HOURS. My wife helped with the center beam by holding one end while I hot bolted the other end. Any handy person should be able to manage this project. It will make a nice forge shop for my knife making.I did run out of the F1 screws which was surprising since it comes with a huge bag. I went back through the directions to make sure I didn't mess up but I was only short roughly 20, so I robbed them off the back and used them on the door. I had some galvanized screws to replace the ones I robbed.Overall I am really excited about this shop and even if the screws on the roof leak, like was said in another review then a dab of caulk will fix that pretty quick. I paid $1100 with shipping for a 10x16 DIY shed. I paid more than that for the gravel.

Very poor quality. Lot of bent parts

I’m loving this shed. The metal is really thin, but I knew that going into this build. I put this together almost entirely alone. There was a few times I needed some extra hands on the other side of the wall, but it took me about a weekend and a half to move in. This weekend it’s getting lights and plugs.Everything lined up pretty well and I thought it wasn’t hard at all.I don’t however like that big gap at the bottom of the front doors, anything can get in that way. I’ll attach some rubber to act as a sweep and fill the gap when the doors are closed.Otherwise, It’s huge! And I’m going to love the space and organization.