STONETECH Bulletproof Sealer, 1 Quart/32 OZ (946ML) Bottle

Was recommended when we purchased our new counter tops and the installer Leaves a nice finish and easy to use.

Effective and easy to use. Easy clean up. Protects the tiles in shower.

This stuff is AMAZING! I could be a spokesperson for their company. I used it to seal red brick half pavers, that I installed as my kitchen floor. A neighbor accidentally spilled about a cup of paint on the brick and I thought for sure I’d have to have them replaced. I was astonished when the paint literally wiped up with some rags. I did have to scrub a little to get it out of the pores of the brick but the paint didn’t actually seep into the brick. I bought this to just to refresh the seal - it’s been about 18 months since I first put it on. Love this product!

I was recommended this product by several online forums for sealing granite countertops, since I had noticed in my new home that water stains were appearing quite easily on light countertops in three bathrooms. The product was easy to apply and the instructions were clear. The product has a water-like consistency. I used foam paint brushes for application - a large one for the open areas and a small one for the tight spaces around the faucet and the edges of the countertop. The process took a couple of hours in total for a large kitchen countertop and three bathrooms. I still notice temporary water staining on the bathroom countertops which are light in color. The kitchen countertop is darker so I'm unsure on the effectiveness for that. I certainly *feel* like I did something by applying this, but I don't feel like the results are phenomenal. I'll probably continue to use this product every couple of years even if it's just for the peace of mind.

I mean, I’m not going to deliberately spill something on the finished surface to see how well it works, now am I? I used this to seal a hearthstone (not a countertop). I picked it after reading a lot of reviews of sealers on Amazon. I followed the directions and made sure that it stayed wet for 10-15 minutes, to allow the sealer to soak in. After reading all the reviews, I was worried about the blemishes and cloudiness that some reviewers wrote about - but I saw nothing of the kind. At the end of the application time, I wiped it down with freshly laundered white sackcloth towels. It dried evenly, and looks good - not shiny (we definitely didn’t want glossy). Before using it on the hearthstone, I “experimented” by applying it to a small section of a marble table top (I flipped the top over and applied it to the underside) and also to an inconspicuous area on the side of the hearthstone, to see how it flowed during application, and to see if there would be any change to the color of the stone once the sealer dried (answer is “none”). That helped me be more confident when it came time to brushing the sealer on the top, wide area of the expensive, extremely heavy and hard to replace hearthstone. While I expect someday some with a glass of red wine is going to trip and spill it on the hearthstone, I’m not going to tempt fate and deliberately spill something on it, so I can’t actually say anything about that. Also just FYI, the directions for the product say to re-apply it in something like 3 -5 years. Not sure I’m going to remember to do that. Finally - it had virtually no smell at all, so that was a big plus.

This product does what it supposed to do and seals the counters thoroughly. I was able to roll out enriched dough and laminate croissant dough without any grease stains on the white stone. When doing a small counter top it is easy. Clean up is quick, and maintaining a wet surface is no problem. Larger countertops are more of a challenge. Because it is water based it is very runny. Masking off walls with tape helped keep it from the walls, but use good tape or it can soak through and create tape removal issues. The biggest problem with large countertops is the final clean up. Because this is a resin it can leave streaks. You must use microfiber cloths to wipe up the excess after treatment. Leaving a thin layer behind is the biggest issue with large countertops, as they start curing so quickly it is impossible to get a second pass that's not sticky. The best thing I found was to have multiple cloths at the ready and work quickly.

Ok read the review everyone seemed to praise this product,so I was eager to do my granite. The product went on very easy and I followed the directions exactly, after the alloted time on the directions I wiped up all the sealer from my granite. IT LEFT STREAKS OF WHITE Haze All over my counters. ...Luckily I read some comments on line and befor it cures you can correct this Haze. I was lucky to have a magic eraser on hand and was able to remove the Haze with a lot of elbow grease. Hopefully the the sealer will still work!

High quality of granite counter top sealer. Follow required prep before applying. Easy to apply, I did 2 applications. Also buy their revitalizer/cleaner product to use for daily cleaning.

Déjà utilisé au fil des années sur mes comptoirs de cuisine, excellent produit. Livraison un peu lente.

Hay que mantener húmedo durante 15 minutos lo cual se vuelve casi imposible sin dar al menos 10 manos, lo que hace que el casi litro no rinda más allá de 3-4m2…..

I bought a marble table and it was getting etched with lemon juice and red wine. I decided to try this bullet proof sealer and not only did it hide the previous etched flaws, but it appears to have given it a nice protected shiny coat. At first it didn’t look like it was going to take as I already had a shiny coat on top, however, as that was getting etched, I wanted to try anyway. You do need to keep it wet and follow the directions very closely. I did two coats within a half an hour of each other and then let it set for 72 hours. I’m very pleased. I also tried it on my Marble Floor, I only did a few tiles in case it was slippery. It didn’t appear to give them any shine, which I was hoping it would, but it also didn’t appear to make them slippery, bonus.

Excellent sealer for our marble tiles and easy to work with, as well as not much of a smell during application.

After purchasing a polished marble table, I wanted to make sure it's sealed for the most protection as it's not a practical material at all. Don't ask me why I bought marble if it's not practical, that,s another debate! As far as the product goes, it's one of the more expensive ones when I searched for one, but the reviews kept coming back as it being a solid product. My biggest fear was discoloration/stains, so I decided to accept paying more for this product and give it a try. In a few words, it works and there are zero stains on my marble top table. This being said, FOLLOW THE INSTRUCTIONS CAREFULLY! For me the trickiest was the step where it says to keep the surface wet during the 10-15 minutes application, do not let the sealant dry before it reaches 10-15 minutes. What this means: you apply a first layer of sealant on the table... the table begins to absorb the sealant and the sealant dries in other areas. When you see this, reapply more generously and evenly. So basically, every minute or so you're reassessing and reapplying sealant, over and over and over, perhaps my table marble is very porous but that may be normal in my case. This is also mentioned in the same instructions, depending on how porous the stone is, you will have to apply more or less sealant, so like I said, Follow the instructions. At the end, I redid 3 layers of sealant application, and in the picture what I have there is the product cured for 24 hours. I can confidently say there are zero stains/discoloration. Am I ready to spill some coffee and orange juice and test it out? I'm not sure I'm that confident, but at least I know the sealant is applied the the polished marble is still shiny.