Hydroponics NFT System with 108 Holes Kits,Vertical Hydroponics PVC Pipe Plant Vegetable

A little shakey but not bad. This is a very small unit but great for apartments and small spaces. Holes are small and very close together so you may have to skip a hole to allow room for some plants. Easy to maintain and works great

Dollar for dollar a really good setup. For about what it would cost you in pvc at the average big box US hardware shop you get all the pieces precut and ready to assemble, plus a timed pump.I recommend using the longer pieces intended for the middle as the legs, so that the reservoir doesn’t have to be wide and in the way.The included sponge media was not successful for me, but 1” rock wool cubes work fine.So far I have not used the highest level of the system, I am concerned about the size of the pump and it’s lift height. Time will tell.

The kit was delivered quickly and was easy to assemble and install. I was disappointed that two of the elbows were missing, but as they were for decoration, I didn't miss them. The water circulates well and there are no leaks even without any glue used to attach the parts. I have had the unit in use for three weeks at this point and am enjoying watching plant development. I hope to have lettuce ready for harvest in about 3 more weeks. The frame makes it east to add lights for indoor use.

Assembly was easy but was very dissatisfied how small it actually came out to be, the cheap material sent to hold the seeds, nothing to hold the tubes from sliding around, and also the pump can’t even pump enough water to reach the top of the hydroponic system.Wouldnt recommend if you planned on not having to purchase things right away like a new water pump, seed holder (rockwool) , and a tub to hold the water.Yes I’ve disassembled the pump to make sure it’s clean, and also cut the hose as short as I could to restrict the amount of excess hose.

Came with all necessary items to get started my wife and I assembled it in about 10 minutes put a bucket under the outlet and turned on the pump via the timer and had zero leaks. It’s a very nice product. Should work very well.

let me start off by stating that my vegetables and herbs are loving the hydroponics system, however I am giving 3 stars only because the stand that hold up the hydroponics system is very very flimsy therefore its very hard to get the pipes to be level and when its not level the water runs to one side and leeks most of your reservoir in a day. I am planning on building a more rigid base for it

The good is that it is pretty well built, and assembled quickly.The bad is that it was missing a few baskets, and it really isn’t a Film of water.It is really a Deep Water Culture, with a pump.What I mean, and you can see in my pictures, is the water level - at its lowest - has to be at least halfway through the pipe. For it to drain from one pipe to the next, it has to fill up the entire large tube - to the level of the adapter, where it can drain to the next pipe.But, even with this, the pump on its lowest setting creates a back pressure of water, that makes it fill each pipe almost all of the way.Actually, in its first location, the ground was uneven by about 1 inch and the pipes were constantly overflowing.A real NFT wouod love a 1 inch drop.

Arrived quickly and in good shape. Easy to assemble, perfect for my plans. I am using it with aquaponics system so will probably get a bigger pump, but would be sufficient for hydroponics. It will need a much bigger lift from my pond. Seems sturdy enough after tapping joints together tight. I am very pleased.