SPACECARE Mobile Roller with 2 Locking Wheels - Adjustable Furniture Dolly with Steady Steel Frame Washing Machine Stand Black Refrigerator Base Moving Cart

Well Built Roller for my heavy Laser Printer

Product is first rate. Just what my washer needed. Just need to get my transfer of dolly deck from ramp to hold in position to dolly truck transfer over too easy care mobile Spacecare washer dolly. Rubber furniture feet cannot hold dolly deck in place. There are no locks on dolly deck casters to hold lift of truck and washer to spacecare dolly. Used wood bocks before to do this. Well now look for 2 x 4 or 2x 6 ramp and or deck aid.

The Space Care Mobile roller arrived on time and well packaged. Upon opening up the box I was pleased with the overall beef of the pieces as well as the castors. Powder coating was suburb. Assembly went great until attaching the castors. First the nuts and bolts for the castor attachments (4 bolts, 4 nuts each ) have problems with crushed threads and small pieces of metal left after they were tapped. This made about a fourth of them not able to even thread with each other. The other problem was the holes drilled into the corner webbing pieces had the inside holes immediately adjacent to the folded piece of metal from the frame. The triangular web pieces were tack welded to the frame a bit off. The result is shown in the two photos where the nuts cannot align with the pre drilled hole meaning the bolt will not fit into the nut. Solved this by hogging out the holes a bit and painting the exposed metal. Since the castor foot covered this up it’s not any kind of deal breaker. I’ll purchase several replacement bolt & nut combinations with the bolts being a tad longer than the supplied bolts. Supplied bolts, after the washers and intervening material have at most one or so threads showing after tightening.I’m using this mobile roller to hold a shop vac with a cyclonic separator among with the cords and vac attachments. A housing will be built on this platform to secure the vac and cyclonic separator. Once assembled this mobile base is sturdy enough for the vac, cyclonic separator and miscellaneous vac attachments. I would buy this again. If the holes were able to align with the bolt fitment this would be 5 stars.

It says that it holds up to 1200lbs, but I suppose that's under the most ideal conditions and probably when the frame is adjusted to it's smallest size. The bigger an object, the heavier it would likely be but this dolly is weakest at it's max size. I put my small condo's washer dryer which probably weighs anywhere from 200-400lbs (not sure). The rack got destroyed while loading it. The cheap soft metal frame bent and a wheel folded underneath it. I would have returned it and been happier but I didn't have time so I built a frame out of 2x4 wood and bought long carriage bolts and moved the wheels from the metal frame to my wood frame and had not issue. Unfortunately I spent $65 for this dolly just to use the wheels which I could have bough for $20. Plus it takes a long time to put this together and then take this apart with the wrenches provided. The whole reason I spent more money for this one was because it said it holds 1200 which made me think it was one of the strongest ones available.

Handles my 6' tall heavy audio rack with ease - brakes work well - I swopped out the bolt for wing nuts for ease of adjusting but I only adjusted it once and kept it there - Wing nuts less reliable but hold plenty well eniugh

It is a nightmare to try to attach the wheels to this dolly. The bolts are too short and access to the narrow area between the triangular frame braces is very difficult. I finally managed to attach all of the bolts but one by inserting them between the triangular frame braces and attaching the nuts on the underside of the unit. One simply wouldn't protrude far enough to thread the nut. I had to use my own hardware for that connection. The 'assembly instructions' are also almost nonexistent. Top call them 'minimal' would be too kind. This unit may do what it says it can do - hold up to 1200 pounds - but I wouldn't suggest testing its capacity in that regard. I only put a 120 pound refrigerator on it and for that load it seems to work fine, once you finally get it assembled. All in all, I suggest avoiding this product unless you can find no other that will serve your purpose. It is the most difficult thing to assemble I have ever encountered, and I have assembled more than a few things in my time.

Pros:1. It looks and feel like a very strong product.Issues:1. On the product's page, it shows that the total height of the caster is 3in. That's not true. The wheels alone are slightly taller than 3in. The entire caster is 4in tall. That can has thrown many of my calculations off. I might have to go and purchase another set of casters with a lower profile.2. The little wrench tools provided with the product are not good at all. Don't try using them because you might hurt yourself. That's because they will start bending and slipping on the nuts before you finish assembling the product.3. The provided bolts for the casters are so short that it took me a while trying to attach the nut to it. The bolt barely sticks out of the other end. If you have big finger, then forget it and replace them with your own bolts and nuts.

I chose this item because it had the capacity to carry a fully loaded and full washing machine (250-300kg with water).The item as advertised as being 9.53 cm high.THIS IS THE HEIGHT OF THE WHEELS ONLY.It actually raises the item on the dolly around 15.5 cm.I had to purchase new wheels ($80 Aus) and drill new holes to fit them, and even then it was a bit tight.