AMVR Upgraded Controller Grips Cover Compatible with Meta/Oculus Quest 3s/Quest 3 Accessories, with Battery Opening Cover and Knuckle Straps Protector(Not for Charging Dock)

I've always been a fan of AMVR products and these grips are very well made. They are one of the few that don't occlude the sensors at all, and also have a cut out for the sensor at the bottom of the grip handle. Tracking is not affected in the slightest. Fitting was easy. There is a custom battery cover which leaves the battery exposed so you can access it through a flap in the silicone cover, and it also has a locating tab to help keep the cover in position. You just fit the battery cover then slide the sleeve over the top and locate the tab on the battery door into a cutout on the sleeve. You then fit the battery over a supplied pull tab to help you remove it when needed (you also get spare tabs in the box). Then there's a flap in the cover which clicks nice and snugly over the battery. It's all very well thought out and feels good when fitted. The silicone is just the right hardness and feels nice in the hand. The straps are comfortable enough but quite firm with no stretch. Adjustment is via Velcro which is normal for these things. The straps hold tight and grip the knuckles without a problem. The silicone is quite thick and offers excellent protection (something i was grateful for after smashing them into a chair on a Bear Saber frenzy!) but it also adds thickness to the controller. This may or may not be a good thing depending on your hands. I have smallish hands and found them a bit chunky although you do get used to it after a while. The other problem with full body covers is that when the grip and trigger buttons are fully depressed they go below the level of the cover which means your fingers edges kind of catch on the rubber as you push them in. Initially this really niggled me but after a period of adjustment I didn't really notice it any more. Neither of these things are a fault with this product, just a side effect of having full body covers. It's a shame white ones weren't available as having black controllers kinda triggers my OCD but you don't see them in VR so i guess it doesn't matter. Another thing I noticed was that AMVR seem to have stopped using press studs to secure the straps to the grips. They are now riveted meaning it would be much more difficult to replace the straps down the line. Overall these are some of the best silicone covers I've seen. I would definitely recommend them.

Great grip covers for the meta 3 controllers! So comfortable, secures the controllers really well in the hands and look great! The materials feel high end, the fit is perfect & precise. It helps with the overall feel of the controllers and allows you to open your hands, completely letting go of the controllers, without dropping them thanks to the adjustable hands starps. I havnt had a single tracking issue whilst using them. I was concerned that completely removing the battery cover may make the controller not feel right in the hands, but the grip covers replacement/included covers fits in place perfectly and allow for very easy access to the battery without the need to remove the grip! Absolutely recommend! Cannot fault on any level. Also loved how the packaging matched the meta quest 3's packaging.

These AMVR grips are a game-changer for my Quest 3 controllers! The fit is snug, and the design is sleek while adding great protection. I love that they come with a battery opening—no more fussing with the cover just to change batteries! The knuckle straps are comfortable and keep the controllers securely in my hands during intense gaming sessions. Overall, it’s a solid upgrade that enhances both comfort and functionality. Worth every penny!

These grips are really good for the money -- Comfortable and feel quality. My only gripe is that they don't come with great instructions so it took me a minute to get them on the controllers.

OK well these grips are fantastic. A perfect fit and do not seem to affect tracking. They were a little bit pricey maybe, but there have been deals, and you do get a good product for price. I think they may be cheaper on the AMVR website. The design is good, they have new battery covers to replace the Meta 3 covers and some tie tabs which you slip under the battery itself. Then the silicone sleeve goes on and has a flap acting as battery door. There is also a little hole which lines up with the batter cover to act as an anchor. All in all, a good product that I'm very happy with, as it gives me confidence when playing games like Beat Saber much more than the default wrist straps.

Bought as an Xmas present for my partner who loves them The grips cover provides a significant improvement in comfort during extended gaming sessions. The material feels soft and ergonomic, offering a secure grip without causing discomfort or fatigue. The thoughtful design enhances the overall feel of the controllers, making them more comfortable to hold. The addition of the battery opening cover is a practical touch. It allows easy access to the battery compartment without having to remove the entire cover, saving time and effort. The precision of the design ensures a snug fit, providing added protection to the controller. One standout feature is the knuckle straps protector. It adds an extra layer of security, preventing accidental drops or throwing them , they stay on during intense eleven table tennis matches , the only thing I would say is there a wee fiddly to set up but apart from that five stars

Good grip and hugs the hand so will not fall even if you throw your hands around

They arrived very quickly, were easy to set up and the best bit is the ease that I can access the batteries from now on. I also love the tiniest of detail with the small clip at the top near the trigger as it it holds it in place and prevents the rubber slipping and impacting on the buttons. Something that was annoying with my other grips. A great product and well worth the money.

I did a lot of research on a bunch of different products before getting a couple different ones to try them all out and these were the winners for grips, I got a bunch of different grip covers in different kinds and me being a bigger guy with bigger hands these are the ones that I kept on my quest 3. I like that they clip into the existing battery cover latch they feel great in the hand good quality deff worth the buy

passar bra på MQ3 men översta fästet skulle gärna få suttit lite högre.

Évaluation – 4.5/5 ⭐ La housse de poignée AMVR est un accessoire conçu pour améliorer l’ergonomie et la protection des manettes Meta Quest 3/3S. Avec un couvercle d’ouverture de batterie pratique et des sangles de protection pour les phalanges, elle offre un confort accru et une meilleure tenue, même lors des sessions de jeu intenses. Points forts ✅ Confort et maintien améliorés – Poignée ergonomique et ajustable pour une prise en main optimale. Accès rapide à la batterie – Plus besoin de retirer la housse pour changer les piles. Protection efficace – Sangles robustes qui sécurisent les mains et réduisent le risque de chute. Points à améliorer ⚠️ Installation initiale un peu délicate – Nécessite un bon ajustement pour un confort optimal. Taille ajustable mais limitée – Peut ne pas convenir parfaitement à toutes les morphologies de mains. Un accessoire essentiel pour améliorer le confort et la sécurité des manettes Quest 3, parfait pour une immersion VR plus naturelle et sans souci. 🎮🔒