NIBBI PE22 Carburetor Kit, 22mm Carburetor with Carb Jets - Fit for 110cc 125cc 130cc Dirt Bike Pit Bike Apollo TaoTao Lifan Kayo SSR

Fit directly from the box onto my Tao tbr7 (hawk 250) and immediatly brought it to life. Super easy to put on and took 20 minutes. No tuning or jetting was necessary. Started right up. Very nice quality. bike was choking to death with the carb that came on the bike. I couldnt even hit 45 in 5th gear and now im at a steady 52 in 5th with no other modifications at all. Worth every penny.

I got this to replace the anemic carb on my 24' boom vader and It woke my bike up, I already removed the emissions crap but the bike was still being held back until I added the nibbi22 with flange, I opted to get the intake rube as well and I'm glad I did, started up right out the box, adjusted air fuel screw 1.5 turns out and the idle to 1500 rpm and it's great, no bog at regular speed or wide open, unless you try ro gun it from a stop but regular riding and spirited riding is so much better, the fit is good, just be careful with the angled filter as mine hit the forks and I damaged my filter, that's no fault of the product, you don't need a 26mm for a 135, I hears they are harder to tune on a 125 vader, ssr etc, you will be better with the 22mm, looks awesome, wasn't damaged during shipping or otherwise.

Absolutely amazing carb. Installed it fired right up ran perfect. Great performance product

Great replacement for Predator engine. I’ve had this on 2 engines now, super easy to tune and use. I love that the idle is adjustable by hand, it made tuning my bike a whole lot easier. Currently it’s on a mildly built 224, the engine prior was a slightly less built 224. The jets it comes with worked for the first engine but the second needed bigger ones. One thing I noticed is even on hot days and hard use, the carb body stays ice cold as well as the intake and filter. I know that Nibbi recommends a 28mm carb for a 200-250cc but you’re really not going to need that unless you’re building a race engine.For reference: Pred 224, gov delete, aluminum flywheel, copper coil, 18lb valve springs, Nibbi 24mm with 38pilot/145main jets, shorty header on a Coleman BT200x and it does over 50mph flawlessly.

I bought this carb for my 2024 apollo dbx19 125cc dirtbike and it bolted right on. I did have to buy nibbi's throttle assembly too, to make it work. But other than that I put a 32 pilot jet in and a 100 main and turned the mixture screw all the way in and 2 turns back out. My bike is running better than ever. Also the carb has cooling. When your running the bike everything else gets hot except the carb. It stays ice cold. Literally. But you will have to tune yours differently based on your engine size. Very good for the money, fits perfect and it's got a manual hand choke for easy cold starts.

Super easy install. Easy to tune but it was a little hard finding info on correct jet size for altitude. Also had to turn the intake manifold 180 degrees to get it to fit on my tao 125 atv. It's larger than the stock carburetor. It looks really nice and it's a quality part. 35/108 jets work perfect for me at 300asl. Had to order them separately but more pep is worth the $10.

I'm a top tech working on cars/bikes/equipment for 30+ years. Looks the business but it's garbage. My bike has a midrange lean spot. It needs a larger jet needle. Looking on their website they'll sell you a needle 4 pack. Unfortunately they're all the same size needle and not a tuning kit with different needles. Why? Because they don't make different size needles for them! That's some pretty shady stuff considering a needle isn't really something that wears out that you'll need four of them. There is no way to tune these carbs properly like a Mikuni. If it works on you bike you're either kidding yourself or you got lucky. The only reason this made my bike faster is because now my wallet is lighter.

The media could not be loaded. I put this on an Apollo 125. It starts first kick and remains idling. I need to tune it but aside from that, I’m very happy with the results.Included was everything I needed to get it going including instructions.