Visiblewave 4K Quad LNB 4 Output HD for SKY HD/Freesat HD with Bracket

Great, did the job, neatly snapped on to the existing arm.

So quick and easy to fit, works perfectly. Great TV signal and picture quality Highly recommend

Fantastic. It worked great and fitted on my sky dish perfect. Thanks for a great deal

This is as good as it gets if not better for the price. Ignorance has caused me a laugh not the product. Replacing sky q lnb ! Got everything on freesat except it with strong signal but poor quality. Up the ladder again for a bit of creativity. In future, I'll get a full dish arm and lnb off a regular supplier. You pay to learn.

Inexpensive neat unit, easy to fit and works.

Used this to replace the LNB on my Satellite dish for Sky TV. From what I could tell I could receive Freesat channels with about 95% signal strength and quality, but sky channels would only work at about 50% signal strength and quality for for about 10 minutes after turning the sky box off and on. I had an old Thompson mini dish with quad LNB which came with the very early sky HD installations about 12/13 years ago. I tried to fit the new LNB the intended way, by taking the plastic adaptor off the old dish. But the new plastic adaptor would not fit to the rectangular metal support on the dish. The old LNB had the skew 1 to 5 markings and the new one has angles on. So I tried the old plastic adaptor with the new LNB. This worked without any realignment needed, but I did a few things which probably helped as follows: There was a seam in the plastic mould of both the new and the old LNB right on the centre line at the top. So I marked the round collar on the old plastic adaptor where the seam was before removing the old LNB. Figured this must get me pretty close on skew. When I put the new LNB in the old adaptor I aligned mark with the seam on the new LNB. For focus in and out the old LNB had a much larger moulding around the white front and the new LNB does not look like the one in the picture on Amazon right now as it can be slid up and down pretty much it's full length in the collar (at least the one I received was like that, a note inside said it was the new 2017 mk4 version which need to be extended before fitting, it comes set forward to fit in smaller packaging I guess). So I set the focus, in and out of the new LNB so it roughly matched where the collar would be in relation to the start of the white plastic on the old LNB. After fitting I went and turned back on my Skybox to check the signal strength and to my surprise having had to mess about a bit with the installation it was better than I have ever had without any realignment. Happy days job done in about 1 hour. Note, having done a bit if reading up as I was having problems with my reception I used Silicon Grease on the connections as well. Clearly the LNB was the main issue, but with the silicon grease on, any luck I'll be good for another 12/13 years.

Bought this to use with a freesat box we had. Super easy to replace the existing and fitted to the sky dish arm well. Included a small guide on where to angle so we received the best signal for our area. Build quality feels good. Tools used were: small flat head to remove existing lnb, long nose pliers to remove existing pin, and a Philips screw driver. Job completed in 15 minutes / 30 mins to check signal on the freesat box with all channels tested showing 100%.

Fixed my satellite tv