Everbuild Stick2 Superglue High Viscosity – Suitable for DIY & Professional projects – Industrial Grade – High Strength – Rapid Setting – Clear – 20g

This Everbuild glue really does what it says on the bottle. The bond is strong, sets quickly, and feels like proper industrial-grade quality. It’s clearly designed with tradespeople and professionals in mind, but there’s nothing stopping anyone from using it for DIY projects or hobbies at home. I’ve used it on a few jobs already and it hasn’t let me down once. The viscosity makes it easy to apply without running everywhere, and the 50g size is generous compared to most small tubes of superglue. Overall, very happy with this purchase and I’d definitely recommend it to anyone needing a reliable, high-strength adhesive.

🔎 The Everbuild HV50-EBD Stick 2 Industrial Grade High Viscosity Superglue, Clear, 50 g is a slow bonding super glue, that gives you around 15-30 seconds to adjust the two parts. 🧡 This is a glue I use almost every day. I bought it to make a popsicle 2 bridges for my two sons' school STEM project. It performed excellently - the bridges are very strong after the glue is cured, and when you make a mistake, you have a little bit of time to reposition two elements. I used around half of the bottle for the 2 bridges, and I'm using it for small repairs around the house since. Even today my son broke his remote control for an RC car. I managed to fix it quickly using the Everbuild glue. This bottle lasts for a very long time and is very cost-effective. 👎 None. 💲 An excellent value for money. Great product, super strong, and helps to fix many things around the house.

The glue itself is great. HV glue is very handy for a tiny blob in between two surfaces. A bit of accelerator if you really need to. HOWEVER, I have never gotten to the bottom of a bottle of this stuff. I have 4 half-full bottles on my shelf, each with a wrecked nozzle. It comes with a fine-ish tipped nozzle with makes the repair easier, but regularly blocked up with dried glue. I have a 1mm drill bit to ream it out before each use, but eventually the nozzle becomes unusable, with about half the contents still remaining.

VERY STRONG super glue. Nice and thick or Viscous so doesn't run everywhere. Takes a little longer to cure/dry than the cheaper, watery superglue (up to 10 minutes) but is extremely strong and doesn't seem as brittle as applying lots of watery glue does. A 50ml bottle should last a lot longer than 10x5ml tubes too as it won't dry out and go solid unless moisture gets into the bottle... Should last months if not years. Very happy I picked this over some of the other strong glued. Recommended.

One of the side sections of my Perspex window bird feeder decided it had had enough of the constantly changing British weather conditions, & promptly fell off. Bought this glue to stick it all back together again, & it’s brilliant! Contrary to other reviews, we had no problems with the bottle at all, the top was easy to remove, there was a hole present in the tip of the nozzle, the bottle was easy to squeeze, & there was no clogging of the glue, it flowed exactly as it should. One word of caution, this is VERY fast acting! You must make absolutely sure that you have whatever bits you’re looking to glue together perfectly aligned, because once you press them together, there’s no time to try & adjust the pieces, it holds fast as soon as they touch! As long as you make sure you get the placement right first time, you shouldn’t have any problems. My feathered friends are back to enjoying their meals, the feeder gets constant daily use by them, as well as the neighbourhood squirrels, & the repair has held up so far through heavy use & some pretty grim weather. Me & the local wildlife are very happy with this purchase, it did the job perfectly, & I think the bottle is very reasonably priced, & there’s enough left over to finish lots of other little repair jobs around the house. I can now use the product with confidence, knowing that it works exactly as intended.

Everbuild Stick2 Superglue does exactly what you want – it grabs fast and holds tight. The high viscosity means it doesn’t run everywhere, so it’s ideal for little repairs as well as more precise jobs. I’ve used it on DIY bits around the house and on a couple of work projects, and the bond has been solid every time. Reliable, easy to use, and definitely one to keep in the toolbox.

Good stuff

UPDATE: Unfortunately the glue went completely hard before I could use it all. I had to downgrade the score from 5-star to 3-star. I had only used a 3rd of the product and within a month it had gone off. ------------------------------------------ I'm a prolific model maker, be they made from wood, metal, card, or a combination of all three. Superglue has always worked well, needing only a small amount required to serve a good bond; the downside is that the best-known brands are expensive and contain only a small amount of glue, usually 7g. Everbuild Superglue High Viscosity works just as well as the more highly advertised and therefore more costly major brands, yet contains 50g of glue for the same price. The high viscosity means the glue doesn't leak everywhere making a mess. My only gripe is the dispenser nozzle clogs and needs a clearing with a sharp needle, but I think that is a small price to pay for this excellent glue. Win-win situation. Recommended.

Sitter bra på många underlag. Torkar inte för fort vilket är en fördel. Verkar inte torka igen flaskan allt för lätt.

prodotto valido si semplice uso adatto su legno ed altri materiali confezione comoda consegnato come descritto da personale molto corretto, in caso di necessità da consigliare.

werkt perfect ook voor 3d printing

Great quick bonding for brass, wood or anything.

Deze lijm heb ik méér dan 2,5 jaar geleden gekocht en ik gebruik hetzelfde flesje -met tussenpozen- nog steeds, tot mijn grote tevredenheid! Trouwens, de lijmkwaliteit is prima: i.c. vnl. allerlei soorten 3D plastics. Bij andere lijmen vertoonden de flesjes reeds na enkele maanden 'olifantenvoeten' en was de inhoud volledig gestold, ook bij de ongeopende ofschoon bewaard op een koele plaats. De viscositeit van deze lijm laat ook toe om hem te gebruiken met een vulmiddel om aldus succesvol vrij grote spleten vullend te verlijmen! En verstopt de opening van het flesje dan nooit? Jawel! Een eerste keer knip je een stukje van de hals maar dan merk je dat zulks niet voor veel herhaling vatbaar is... DE oplossing: op Amazon verkopen ze handboorhouders met piepkleine boortjes erbij. Handmatig kun je dan een nieuw gaatje boren doorheen de opgedroogde lijm in de hals van het flesje. Wel opletten dat je de hals zelf niet aanboort! Deze operatie is schier eindeloos herhaalbaar! Stel ik proefondervindelijk vast! MAAR niet te vergeten: na elk gebruik het boortje en de flessenhals met een vod droog wrijven vooraleer alles op te bergen én het flesje fors afsluiten! Succes!