YINMIK pH Meter, Digital pH Tester for Hydroponics, pH Temp Meter with Horizontal Display for Pool, Spa, Hot Tub, Indoor Plants, Koi Ponds, Drinking Water, Wine Beer Making, Aquarium, Aquaculture

I purchased the YINMIK YK P01 pH Tester Digital pH Meter several months ago for daily use in my hydroponic system, and it has become one of the most valuable tools in my setup. After long term, consistent use, I can confidently say this meter delivers excellent real world accuracy, dependable performance when properly maintained, and outstanding value for the price. For growers, aquarium hobbyists, brewers, or anyone who needs reliable pH measurements, this is an exceptionally solid choice. The YK P01 includes everything needed to get started immediately. It comes with calibration powders for pH 4.00, 7.00, and 10.01, three LR44 batteries, a dropper, and a protective cap with an internal sponge designed to help keep the probe hydrated. The large backlit horizontal LCD displays both pH and temperature at the same time, making readings easy to see even in low light conditions. Features like automatic temperature compensation, fast response times, and a hold function make testing quick and convenient, even when checking multiple reservoirs. This is actually my second YINMIK meter, and my first experience taught me an important lesson about proper care. I initially made common beginner mistakes, such as failing to rinse the probe after use and allowing the glass bulb to dry out, which caused readings to drift over time. When I contacted YINMIK customer support, they were outstanding and immediately sent a replacement at no cost. That level of service says a lot about the company. With the replacement unit, I followed the care instructions closely, calibrated it using the included powders, and the performance has been excellent ever since. Calibration takes less than a minute, and the readings have remained consistent and reliable. In hydroponics, maintaining proper pH is critical. Even small swings can quickly lead to nutrient lockout and visible plant stress. Before switching to this meter, inconsistent readings from a cheaper tester nearly cost me an entire crop. Once I began using the YK P01, I immediately identified an out of range reservoir, corrected it, and saw clear improvement within hours. Since then, plant health, root development, and overall growth have improved significantly, and I now have full confidence in my readings. Proper maintenance is essential with any glass electrode pH meter, and this one is no exception. I rinse the probe with distilled water after every use and keep the sponge in the protective cap lightly moistened using pH buffer or a storage solution. The meter does not include a carrying case or a dedicated storage solution, so I store it carefully and recommend purchasing a small pouch if you plan to transport it. I recalibrate about once a month or before important measurements, and the process is simple and straightforward. When compared with significantly more expensive brands, the YINMIK YK P01 holds up remarkably well. When calibrated and maintained properly, readings consistently fall within about 0.1 pH, which is more than adequate for serious hydroponic, aquarium, or water testing use. Its compact size, durability, and dependable performance make it well suited for daily use in humid or demanding environments. In summary, this pH meter delivers accuracy, reliability, and peace of mind at a price that is hard to beat. It has saved me time, prevented costly mistakes, and greatly improved my confidence in managing pH sensitive systems. Take care of it, keep the probe hydrated, and it will serve you well for years. Highly recommended.

Great little meter. The solution stays good well over 15 days. It will give super accurate results if you calibrate with all 3 solutions, but since I only need +/-.1 accuracy, a once or twice daily calibration (which takes 15 seconds) if sufficient for me.

The device has an interesting set of pH estimates to program it, which does take a couple minutes but is well designed and yields reasonable accuracy. Good unit overall!

Works as advertised. Use for testing ph of syrups I make for mixed drinks. Keeping ph below 3.7 helps with shelf stability. I have a grenadine syrup I made that I’ve been using for about 8 weeks now just sitting in a cupboard. Device was calibrated fine out of the box. Be sure to purchase KCL probe solution to keep the sponge that is in the cap damp. The sponge was damp when I received the probe. The probe should never be allowed to dry out. You will also need calibration solution or powders and distilled water to make your own.

I needed a quick replacement when my other ph pen died. This pen filled the roll incredibly well. The included temperature gauge is an amazing value and seems relatively accurate. I have not tested the temperature against another meter. The other brilliant feature is the backlight display that auto shuts off after about 10 seconds. you can still see the reading, but the backlight turns off to save battery. accuracy - this pen, When tested against my Milwaukee ph pen shows a difference of only .1, this is without calibrating the YINMIK ph meter out of the box. reliability - used for only about a month so far without issue, will update if it fails. accidentally fully immersed the meter in water for 2-3 seconds. dried the exterior and it remains fully functional. support your local brands when you can, but this is a GREAT backup pen.

I’ve not been this frustrated for a hot minute. I just spent the better part of two hours going back and forth calibrating and re calibrating this stupid pen trying to stabilize the readout and it just won’t work. It reads properly for the test liquids at first and then when I go to actually use it for something I NEED it for and what prompted the purchase to begin with- it DOES NOT WORK. The readouts are off by over 2 whole points nearly every time. Even just testing it to see if it was a fluke, I tried reading my distilled water and it’s telling me it’s at 4.9-5.8 when I know dang well it sits at a perfect 7.1 every time. This pen is utter garbage - unless I got a bad one? I dunno. This has been SO frustrating!

Love this lost cost meter for pH testing, but make sure it's calibrated and heed my WARNING: the glass probe breaks if it dries out (that's why they include a dropper and sponge inside the cap). Keep the sponge wet with 3-4 drops of pH 4 buffer and store in a Ziploc to save it (reapply every few days). Also DO NOT DROP IT. These warnings are NOT IN THE MANUAL so ensure you follow them or your meter will break quickly and need to be replaced.

Inexpensive little meter. Needs calibrating more often than I would like. For the price it’s acceptable.

Ne semble pas donner de valeur erronée.

Great ! Even brought a spare as they work so well. Very accurate and easy to use. No need to spend a fortune, perfect at this price.

Good meter for measuring water pH I am satisfied

Great price and works well!!

HANDS DOWN THE BEST PH METER I HAVE EVER OWNED. I have tried several, you might need to buy liquid ph solution to calibrate properly BUT once it is calibrated this baby GOES. From a hydroponic grower who is serious about accuracy, you can’t go wrong. I plan on ordering a back up as well. :)