The Asahi America Omni PVC unibody inline ball valve has a t-handle and National Pipe Taper (NPT) female threads on both ends. This valve body is made of PVC for corrosion resistance, high strength, and less weight than fittings made from metal. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings, and it is suitable for cold water, venting, and waste applications. This valve has an acrylonitrile butadiene styrene (ABS) t-handle for manual on/off control. Polytetrafluoroethylene (PTFE) seats and ethylene propylene diene monomer (EPDM) seals reduce the risk of leakage. This valve has female NPT threads for connecting to male threaded pipes, creating a tighter seal than straight threads. The maximum pressure rating is 150 pounds per square inch (psi), and the temperature range is 30 to 120 degrees Fahrenheit. This valve meets National Sanitation Foundation (NSF) 61 standards for quality assurance.Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter of the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball's position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.Asahi/America manufactures corrosion-resistant fluid products. The company, founded in 1971 and headquartered in Malden, MA, meets International Organization for Standardization (ISO) 9001:2008 and 14001:2004, ATEX, RoHS, and NSF-61 certification standards.
K**S
Just started dripping.
Last year bought this. I only use it in the summer. I put the valve back on for this summer and turned on, works great. Turn it off and it started dripping
M**E
5 years of solid performance. Worth every penny.
I bought this valve in 2012. I have turned the valve open and closed under pressure several thousand times in the past five years, and it is finally failing. The knob is jamming and can no longer fully open the valve. I am profoundly impressed with the build quality of this valve, so naturally I am replacing the failed valve with the same product. The next time I need plumbing hardware, I'll be looking at Asahi America products first, and I recommend you do the same.
J**.
Good product
These nice sturdy valves. Only gave it four stars because this is a replacement for one that is less than two years old.
R**Y
Fixed our pool
We have a generic above ground pool and we needed this valve to attach a new in line chlorinator. This did the job quite well.
TrustPilot
4天前
1 周前
