🚙 Illuminate Your Adventure!
The Gempro LED Sequential Front Turn Signal Lights are designed specifically for 1997-2006 Jeep Wrangler TJ models. Featuring a stylish smoked lens, these lights offer a modern upgrade with sequential amber turn signals and white parking lights. Built with durable ABS plastic and a lifespan exceeding 55,000 hours, they are waterproof, dustproof, and shockproof. Installation is a breeze with a plug-and-play design, allowing you to enhance your vehicle's look in just 15 minutes. Plus, enjoy the confidence of a 12-month warranty.
| Brand | Gempro |
| Color | TURN SIGNALS, 2PC |
| Specific Uses For Product | Front Turn Signal |
| Vehicle Service Type | Car, Jeep |
| Year | 1997 |
| Special Feature | Waterproof |
| Auto Part Position | Front |
| Lens Color | Smoke |
| Lens Material | Abs,Plastic |
| Assembly Required | No |
| Manufacturer | GemPro |
| Item Weight | 14.9 ounces |
| Package Dimensions | 6.69 x 6.1 x 3.82 inches |
| Item model number | OR-72216DS-1 |
| Manufacturer Part Number | OR-72216DS-1 |
| Special Features | Waterproof |
J**S
Works perfectly
5 minute install and everything worked as I'd hoped. Was happy to see the DOT approved relief embossed in both front lens covers. Wiring diagram (plug in instructions) did not match the existing colors of my 2005 TJ but I matched the ground (black) when plugging it in to the sockets and had no issues with erratic flashing when using either turn signal. Pretty neat and super easy upgrade from stock lighting. Very happy with the end results =) Lights came marked as left or right and the sequential pattern works to indicate which direction I'm turning.
C**N
No bolt to hold in place
This product was great. It looks sleek and is brighter than the factory lights that came with my TJ. It was a quick replacement from old to new. The installation is quick with the led adaptor clicking in to the light spot.My one complaint is that there is no bolt to hold this into place. There is a plastic piece that goes where the bolt used to hold the light in. The light hasn't popped out, and I don't believe it would pop out easily. My stress is from someone being able to walk by and pull the lights off without tools. A quick solution could be double sided tape to ensure the light doesn't come out, or some glue.
B**K
10 Minutes to upgrade your Turn Signals
I only replaced the front two turn signals. I did not update the relay switch yet - all other lights are non-LED. Without updating the Relay switch, the lights will flash faster than normal due to the lower power draw. This took me 10 minutes. Quick note, the instructions were a little hard to follow here... when you pull the light out - look at the Jeep wires into the turn signal assembly. Find the one that looks red (should be one on the outside - not in the middle of the three) - then when inserting the socket fixture of the new light into the bulb, simply match the red wire of the new assembly to the same side (both reds on bottom / or top) and set the new plug the same orientation. Additionally I have the progressive turn signals starting from inside to outside on both lights - you may not get it right the first time, so don't screw in until you have the orientation of the progressive turn signal lights the way you want them. Great product. Easy to install.
D**N
👍
Fits good, looks good, and much brighter. Easy install.
S**C
Junk, don’t work, no support, can’t reach them from any of their numbers, email, or store
Pure junk. Had problems right out of the box. They have cold solder joints and only work intermittently. Of give them a good smack, they’ll work for a day or two. This is a huge problem because they’re required by law and my son’s lights work about 35% of the time. I’m not a newbie and I’m quite experienced in automotive electrical equipment. I’ve been installing stereos, lights, and just about any other electrical mods you can imagine for 40 years and these never worked correctly from the first time. Their support is useless, their phone number doesn’t work, and their email address comes back as unrecognized. Ordinarily, I’d give the manufacturer an opportunity to make things right before leaving a poor review. But I can’t even get ahold of them from any of the means of communication that they list on their support and store pages.Unfortunately, I have to give them one star as a review in order to give a review.What a horrible birthday present. My son is so disappointed.
K**T
SUPER updated FANTASTIC look!!!
The media could not be loaded. Ok, so L O V E the look and install was easy HOWEVER...there is a dedicated left and right (they are not marked either, so trial and error). Additionally, not plug and play...I have a 2000 Jeep TJ and had all lights hyper flashing when engaged turn signals. SO, bought a new flasher relay (EP26 for me- note I also have LED tail lights) that accommodates led turn signals and it resolved flashing issue. New relay was $16 on Amazon. All was worth it !! I LOVE THE LIGHTS AND THE LOOK and how they work!!!!
T**D
Well made and look great
That said, they caused some issues with the taillights and front marker/turn signals. Caution to Jeep TJ owners, do your research before you install them. Lastly, the opening was a little to large for my current bulb fittings and they fell out a lot before I changed back to OEM
C**L
Worth it!
Worked perfect and such an upgrade from the old lights!
