X-Sense 10-Year Battery Combination Smoke Carbon Monoxide Alarm Detector with Large LCD Display (Standalone Model)

I ordered the three pack for use in important areas of the house. Test function operated flawlessly and having a battery that lasts ten years is awesome! Installation is simple and pairing went as described, plus having the remote for testing and silencing is bonus. I do wish that the led screen could be checked and read without the unit having to alarm to have it backlit. I am glad that I chose the X-sense system to protect my family.

I have 7 of these in my home. Each is interconnected so when one goes off, they all go off. This is a must have for any home and should be standard. Many times in the past, I have missed a smoke alarm going off because I was in the shop or some other part of the house where an alarm is challenging to hear. These mitigate situations where you are not aware.The other day, I had lit a stick of incense and placed it in an old planter pot that had dirt in it. Well, it managed to burn the dirt and melt the plastic liner in the pot. I was in the shop at the time and when the kitchen detector went off, so did the one in the shop.The X-Sense detectors that link are a little more spendy, however I can say that the feature is well worth it.What I like:* Easy install* well made with quality parts. These not only look good but they also feel substantial* Interconnectivity!* No need to fool around with another app on my phone. I like the simplicity although I do like the Nest Protect’s ability to send a notification and turn off the HVAC if smoke is present. That’s a nice feature but the price point makes them difficult to justify the cost. I can get three XSense detectors for the price of one Nest Protect.* No subscription required.* has a visual display in addition to standard LED lights.Cons:* not able to send notifications in a smoke/fire/CO situation.I highly recommend these over the standard detectors that have been in use for a few decades now. Step up to the XSense and link them together!

The X-Sense Smoke+Carbon monoxide detectors with 10 year batteries were simple to install. I was able to use the anchors already in my ceiling for the smoke detectors I replaced just having to add one additional anchor. They look good and all worked great when I tested them. Overall, I’m very pleased with this purchase so far.

Works really well. Sealed battery. Life is about 10 years then discard unit and acquire another. Alarm is sufficiently loud. Alarms on CO and smoke.

I purchased a 3-pack to use in strategic locations around the home. These next generation detectors offer three desirable features that raise them to near the top of their class.(1) Combined smoke and carbon dioxide alerts. Rather than purchase two detectors, let one do the jobs of two and save money.(2) Ten-year internal batteries. No more 9-volt battery replacements every year. More savings and less hassle. And at the end of the ten year power cycle, the detectors will chirp to let you know that replacement time has come. Turning off the alert requires a little twist and this will deactivate the detector.(3) Optional Interconnection. Most stand alone detectors will alert you within a limited area of use, but what happens if you are not nearby to hear the alarm? The optional wireless interconnection solves this problem by sending a signal to the other detectors in the group, and these will sound off.Wireless interconnection is optional; just don't turn it on. Note: The detector is delivered tuned OFF. Once the detector is turned inside of the mounting ring it will be activated.Important mounting notes. Each detector comes with a mounting ring that holds the detector. If you want the detector display to be horizontal to the floor, then attach the detector to the ring (which activates it), designate a mounting location, and mark the location on the wall/ceiling/other and the orientation of the ring. Remove the ring from the detector, reposition the ring at the marked mounting location, pencil mark the drill holes before drilling, drill the holes, and drive in the screws. The detector will now turn into the mounting ring with the display oriented as desired.

These are a great option when hard wiring is not feasible in some homes. They have a 10 year lifespan and 10 year sealed battery. Very economical and easy to set up.

Worked like a charm, easy to install & pair.

Attractive combo unit. Came with hardware to install. Went up easy, within twenty minutes! We had bought four of the devices.