FOSHIO2PCS Plastic Razor Blade Scraper Tool and 100PCS Plastic Blades for Gasket Remover, Sticker Remover, Labels Decal and Adhesive Remover for Windows and Glass (Grey)

I used about 70 of these blades to take off the 12yo POS Diamond Shield from my Phaeton. They worked great, but there are some limitations:1) Keep the angle between the handle and the work surface as low as possible. Too high, and the blade will snap.2) It does great on automotive enamel. Not a scratch or paint damage any where until...3) Keep blades clean and swap more often than you think is necessary. If sand gets embedded in the plastic, you will scrape the paint.4) Use anything you can to make the scraper handle longer and fatter to decrease stress on your fingers and hands. I used a 2" diameter wooden dowel, cut a slit in the end, pushed about 2" of the scraper handle into the dowel, and then drove two screws through the dowel clamp it into place. Made a HUGE difference in the amount of force I could apply and prevented further bruising of my palms.All in all, these, combined with this solvent (https://www.amazon.com/dp/B000C025KQ) and a good quality spray bottle, made the job totally DIY. I had my film and adhesive removed in under 10 hours of total time. Just keep in mind you apply the solvent twice... once to soften the film, then to soften the adhesive. You must wait AT LEAST 10 minutes for the adhesive to soften.

I purchased this product initially for scrapping 3D printed objects off of the build plates on my 3D printers. The scraper works very well without scratching or otherwise damaging the build plates on my 3D printers. The edge of the blades aren't "sharp" per se but it's got enough of an edge on it to get under items w/o issue and the blades don't dull or chip unless you're using the item incorrectly. (I own 4 of these scrapers and I have changed blades maybe twice?)I've also used the scrapers for removing various stickers from various surfaces. In this capacity the scrapers also work well though the type of sticker and especially the type of adhesive can make for very different experiences. The blade, being plastic, hasn't marked up any metal, glass or plastic surfaces I've scraped stickers off of. That said, if you were scraping a soft enough surface with the blade at a steep angle and exerted enough force I could see you gouging some materials but you'd have to try.Though in some instances a scraper that uses a razor blade may work better those scrapers are inherently more dangerous to use user and more likely to damage the surface they're scraping. If you don't need a metal bladed scraper I would advise against them and just buy these instead.

Like the usability of it and that it’s plastic so safer

Bought this set first, then tried to save a buck with another set and the blades were junk. They were super brittle and useless. SO, I'm back, and won't stray again. Solid handle, good blades and great value overall. Great tool I use a lot cleaning items a metal blade won't tolerate.

Worked perfect. Razors hold up really well.

Discovering the existence of a plastic razor blade scraper has been a game-changer for cleaning my oven. Dealing with stubborn old grease on my Viking stove was a concern, and using a metal razor wasn't an option. This plastic scraper allows me to effectively remove the grease without risking any damage to my stove.

Suprise! Not as great as video showed this to be. They're "OK" but not great, not fantastic, just "OK". Video showed this to remove sticky with ease. Eh...not so easy. Took me about 10 minutes to remove sticky from my new sliding doors. That was after me using "Goo Gone". Then it came off as shown on video. Just don't expect an amazing product. True it didn't scratch the metal or mar it up. But again...it's just a mediocre product.

Great deal.Two holders and tons of blades. Can't go wrong!

I like that this came in a 2 pack with many plastic blades. Very handy. Works well.

Es mi primera vez usando esta marca y la verdad funciona muy bien, cumple su propósito de raspar y remover como una navaja pero sin provocar daños a las superficies de cristal similares.Yo las uso para remover residuos y etiquetas de vidrios, productos electrónicos, superficies metálicas, y en general de cualquier superficie lisa. En superficies de vehículos las utilizo con mucho cuidado para no provocar rayones en la pintura.

Purchased to remove vinyl stripes on my Ford. Happy with the product it worked well and did what i needed.

When removing decal adhesive, silicone, rubber backing and adhesive etc this is the tool for the job.It came quickly and with two packs with loads of blades.You can still scratch the paint and/or a decal edge if you're not careful enough but used properly it cleans without scratches, which makes our clients happy.The handle is strong accepts the blades easily. The blades are strong when used for their intended purpose. If you're looking to use it like a metal blade then go use a metal blade instead.This tool is prefect for our needs when working on clients RVs and we'll keep using it.

Útil para adhesivo reciente, para retirar adhesivos viejos es necesario solvente adicional.