Mini Small Stereo Audio preamplifier, Headphone Amplifier, Gain 20dB Phono Turntable Phonograph preamp, Dual op amp NE5532 with RCA 3.5mm Input to RCA 3.5mm Output

After testing new product: AtNeDcVh can confirm that it is built with very good quality. No hum, no noise, all connections: inputs and outputs worked as expected. Lots of functions, several options for inputs and outputs - well thought, well designed. Simple. Volume knob is small, useful, do not throwing to eyes, yet can be used without a problem. Volume even on 10 o'clock is giving adequate volume, again without any hum, noise and issues. Device is not slowing down pace of tracks, seems not changing speed of a playing track. It's not of course super expensive device, that exaggerating sound, and to my opinion is focusing on midrange giving pretty full sound range. Can produce trembles well, triangles and cymbals were pretty good, not as airy and copper like as with good tubes, but still very-very good. Bass and mid-bass were without any booming and presented all range very good. Black, silence was clear, good imaging and ending air was presentable. I tried it as a headphone amp, as preamp before and right after a turntable, in receiver in mid of tape monitor loop, boosting a tv and external speaker system to passive speakers with low sensitivity to a desirable level. Overall - very good and inexpensive product, which can be used on many occasions. On almost all situations volume at about 10-10:30 o'clock was good enough without changing much of the sound. To manufacturer I can advise a couple options: - Power supply cord is really-really short. I'd say too short to standard use. - Reduce the logo on top of the body by making it really small either on a side or on a front panel: there is no need-to-know exact model and it is bothering too much and aesthetically is not very good. - Hope, that designer team can play with other options, like: - adding tone controls (Bass, Tremble or even Mid); - along with tone controls adding an option to use 12ax7 tube. (or even replaceable tube inputs/holders to use various types of tubes, but there shall be better testing to make it without any hum and noise, making such option much better and reliable, then Bellari phono preamp as example.) I'd love to see those options, especially if price will be adequate. Again: AtNeDcVh Mini Small Stereo Audio preamplifier to me is very good and built well product.

This is a variable power, 20 dB max pre-amp probably with 47 k-ohm input impedance and able to easily drive an amplifier impedance of 47 k-ohm. At full power it delivers very close to 20 dB of gain. It worked immediately out of the box with easy and obvious connections. The blue power-on LED is unnecessarily bright but other than that it's perfect with no noticeable distortion. I use it after a blue tooth receiver paired with a television to drive a stereo power amplifier.

I bought this to boost the audio signal coming out of an old DVD player, before sending signal to a Bluetooth transmitter and finally to a Bluetooth speaker. Does that perfectly, with zero additional signal noise. A perfect and inexpensive solution for my needs.

I hate bending down and having to adjust a passive subwoofer volume. So, I got these (three in total). They work very well. However, be careful not to overdrive your subwoofer. There is a little noise (hiss) about 1/3 way up (too high for the sub anyways, so not a big deal).

Took a weak earphone output from an electric piano and yielded a strong clean signal to my mini amp. Solved a problem at very low cost.

Pretty remarkable device. It turns an anemic audio out from a computer or phone to something can can drive an amplifier. Sweet deal good for on the go as well

I use this unit upstream to a small Tube Amp. This box is low noise and is the perfect front end to an analog amplifier. It's a plug and play installation, just connect your input and output cables and plug it in to the included power supply! It features both RCA and 3.5mm in and out ports. As a bonus there is a front access 3.5mm Headphone output! The circuitry is enclosed in a really nice solid aluminum box. I highly recommend this unit! Great price, Exceptional build quality!

I have a Yamaha MX88 synth that I play almost exclusively through headphones. I've always felt the maximum headphone volume, regardless of settings/tweaks, is not quite where I want it. I'm careful about my ears and I'm not looking to blast myself with volume. We have an acoustic piano in the house and I guess I'm looking for a similar sensation. I like the audio quality of the Yamaha's headphone output very much but Y-cabling the stereo line outs to a small amp and using its headphone jack colored the sound too much and was also too clunky for my small space. I wanted something small and this little preamp fits the bill. It's about 2 1/4" x 3 1/4" and simple - just a power button and volume control - and sits on top of the keyboard with enough mass in its metal case that I don't have to worry about the weight of the headphone wire moving it around. I use a short mini-male to mini-male cord with one end into a 1/4" (guitar plug) adaptor and the other into the Yamaha's headphone out. The other mini-male goes into the back mini jack of the preamp and my headphones (50 Ohms) go into the front mini jack. The preamp comes with a power supply that I add to the same power strip as the keyboard, so there no extra effort turning things on and off. There are no numbers on the preamp volume knob but setting it to about 11 o'clock gives me more boost than I would ever want with no detectable noise. It also lets me turn down and ride the synth's easier-to-reach master volume knob for plenty of headroom and fine tweaks while I'm playing. Exactly what I wanted - how often can you say that these days?

Facilité de connexion , un conseil pour les futurs acquéreurs , insérer doucement les fiches RCA , idem pour les ôter . Bien effectuer toutes les connexions avant d'insérer la prise d'alimentation . À l'inverse , en fin d'utilisation , éteindre tous les appareils branchés avant d'éteindre le mini ampli , et le débrancher du secteur . Cette démarche a pour but de protéger les appareils , surtout les enceintes qui vont émettre un clac des hauts - parleurs s'ils sont encore alimentés quand vous débranchez , risquant de les abîmer... Très bonne qualité de ce petit ampli intermédiaire , la puissance délivrée est excellente . Personnellement , j'écoute des CD depuis un lecteur , sur un ensemble home theater ( barre de son 40 watts + caisson de basses 40 watts = puissance délivrée 80 watts ). J'ai réglé le volume de mon home theater aux deux tiers , il me suffit seulement sur le petit ampli intermédiaire de tourner le bouton de volume à 07h00 pour une écoute disco convenable . il reste donc une très large plage de puissance , je pourrai aisément atteindre les 80 watts ... Je vais essayer de mettre une vidéo avec musique ! J'ai acheté de très bons câbles également chez AMAZON, la restitution sonore est extra . Basses bien présentes et aérées , médium et aigus très nets . Conclusion : Je recommande sans hésitation . Merci !

Normally 5 stars, but the powerbrick was delivered with uk plug, not eu plug. But i keep it

Top Qualität

I use it as headphone-out with some of my ham-radios. Works very well, good sound, very well made, has a good finish, no cheap shortcuts! Fells sturdy and looks good. I consider this very good value for money! Recommended!

Don't know why so hard to find a good economical pre amp on here for a keyboard instrument to go into a mixer... But this is the one! You might need trs to rca converter cables too but that's easy to find. Great product and no noise even on max setting, and great volume increase.