Carbon Monoxide Detector, AA Battery Powered CO Alarm with LEDs, Test-Reset Button, Low Battery Indicator, Portable

I purchased this kidde co detector for our car or when we travel. I got this brand coz it’s UL-certified, so I know it meets safety standards and has been properly tested that alone gives me confidence it’s reliable. Setup was easy since it runs on AA batteries, no wiring or complicated installation required. The LED indicators make it simple to check status at a glance, and the test/reset button works smoothly. It also says there will be low-battery alert, so it won’t quietly stop working without me knowing. The portable size is another bonus it’s easy to move if I want coverage in other places, or even take it along when traveling. For anyone looking for a trusted, approved, and low-maintenance CO alarm, this one really covers the essentials. You have to do research before buying

The Kidde Carbon Monoxide Detector is one of those small investments that delivers huge peace of mind. After installing it in my home, I immediately felt more secure knowing that my family is protected from something as serious—and silent—as carbon monoxide exposure. Setup was incredibly easy. It took just a few minutes to install, and the instructions were clear and straightforward. The digital display is a nice touch—it gives real-time CO levels, which adds an extra layer of reassurance beyond just an alarm. What really stands out is its reliability and thoughtful design. It has a clear, loud alert that’s hard to miss, and the test/reset button works without a hitch. I also appreciate that it’s battery-operated with a backup option, so it continues working even during power outages. In a world where safety often gets overlooked until it’s too late, this detector provides consistent, quiet protection you can depend on. If you’re looking for an easy-to-use, durable, and accurate carbon monoxide detector, Kidde is a brand you can trust—and this unit proves it. Highly recommended for any home, apartment, or even RV. It’s a small device that could make a life-saving difference.

With emergency products like CO detectors, it's hard to know if they really work unless you're actually being exposed to dangerous amounts of CO. And if a CO detector doesn't work, you wouldn't know; instead, you'd just be poisoned while thinking that nothing was wrong. The only way to really find out if it works is to put it in an airtight container and generate CO. Because I like to play with dangerous chemicals at home, I decided to try this out. Adding formic acid to concentrated sulfuric acid causes the formic acid (HCOOH) to break down into CO and H2O. I got both of these chemicals for less than $10/liter apiece, plus shipping. I put some sulfuric acid into a graduated cylinder and placed it in a 1-gallon airtight plastic container. I then added small amounts of diluted formic acid and rapidly closed the container. Sure enough, it worked! It registered CO concentrations that were well within the ballpark of what I'd expect to get with the amount of formic acid I added (using the ideal gas law to figure out what the maximum CO level would be). In high concentration tests, I found that the alarm goes off within 3 minutes of hitting 500 ppm (which is dangerous but would take several hours to kill, giving plenty of time to get to fresh air). In another test, it went off after about 20 minutes of CO levels around 190 ppm, which is dangerous but not lethal. Its peak reading is in the 910-920 ppm range; it doesn't display levels higher than that. Needless to say, it goes off within a minute or two of such high CO levels and anybody who sees 900+ ppm on the display should leave their house and seek medical help immediately. It worked well in low concentration tests too. Due to some strange US regulation, it displays "0" for any reading below 30 ppm. If you press the "peak level" button, though, it will tell you what its peak reading was even if it was below 30 ppm. This works down to the 10-15 ppm range, below which you don't really have to worry about CO at all. Prolonged exposure around 50 ppm leads to an alarm after a couple of hours. Another, simpler test (which anyone with a CO detector should do to make sure it's working) is to light a candle in an enclosed container with the CO detector, then close the container. The candle will burn through the available oxygen and a fair amount of incomplete combustion (releasing CO instead of CO2) will occur as it runs out of O2. I tried this and got 96 ppm with a small candle in my gallon container; a larger candle would probably release more. I then tried it by lighting a crumpled piece of newspaper in the container and got >910 ppm, which is reasonable because paper and wood experience pyrolysis, which releases lots of CO. Combustion of small amounts of acetone (a fairly clean fuel relative to paper) resulted in 300-550 ppm depending on how hot the fire got before I put the lid on; the lower reading relative to paper helps confirm that it's reading accurately. In conclusion - this $20 detector works very well when tested with real CO. It's accurate, the alarm goes off at dangerous CO levels, it only goes off if CO levels are dangerous, and it might just save your life.

Nice item, thanks

I like the digital screen as apposed to the cheaper monitors without a display. It’s about the same size as any other unit in its class. Easy to mount. Easy to run a test.

One of the big challenges that I had was placement - at room temperature, we want to try and detect carbon monoxide around 5.5 feet from the floor. My smoke alarms are ceiling mounted (and I have no desire to replace all of them at once, which is kind of a fact of life with hardwired), and my wall plugs are all well below 5 feet from the floor. Since it's battery powered, it's easy to place it anywhere. There are excellent functionality reviews. The alarm is loud enough to wake me up should I ever need it.

Fonctionne bien

GOOD

Bon prix et facile d'utilisation

Bought January 2016. It must count the hours from when it's activated, because it chirped and displayed 'END' at the 10 year mark. (Unfortunate that it was at 4am.)

Bon produit , dure 10 ans sans problème