Printer Cleaning Kit for Epson, Printhead Cleaning Kit for HP, Inkjet Printer Head Cleaner for Canon, Printers Cleaner Printhead Cleaning Solution for Inkjet, Printers Print Head Cleaning Kits 100mL

Great product. Easy to use and fixed my printing problems that I’ve been trying to solve for the last few years. I wish I had heard of this print head cleaning process sooner. I found a video tutorial on how to do this task, bought the product, cleaned the nozzles and now my Epson WF 7710 is printing like new again.

Cleaned my inkjet printer that had been sitting for 3 years. I took out the heads, put some solution in the surynge and forced it through the ports so ink would come out. Then the surynge went in the attachments on the head carrier and I sprayed some solution int the pipes and tucked some ink out with the vaccume of the surynge. Worked great. I ran a few papers through the printer and my printer functions again and the print quality is awesome. Well worth spending a little money to save a $250 or so printer.

Nice cleaning set that was exactly as described. It worked well but did not fix my printer problem.

It was a bit difficult to figure out access to my inkhead, even after watching their video, but that's not their fault. I have ten minutes of intense fear after I did the cleaning, because I'd paused overnight and didn't notice there was still a sheet of paper in there. Teasing out all the soggy bits used up my quota of luck this month, so RTFM TWICE and doublecheck yourself. Assembling the syringe from random bits and forcing the silicon tube onto the ink stub was not easy. Good fingers, a hemostat or fine plier, and bright light are needed. Not easy. Not fun. But once I got it all done (and undid my paper jam mess) the printer fired up. Didn't tell me one color was out (as opposed to still clogged) but once I found that, eureka! The damn thing is printing again. I used two full syringes, after 6 "head cleanings" still hadn't purged the black, fwiw. I think the full kit would give you one full cleaning, 1x on all four colors. But for me, the black cart is the devil incarnate. If I don't print for three weeks...goodbye. Bottom line? This worked as claimed. Saved me from buying a new printer!

This printer head cleaner worked perfectly on my Epson printer. It unclogged the nozzles quickly and improved the print quality right away.

The solution worked. That’s the good news. But buying the kit was worthless. None of the incidental tools included with the syringe (tube and end pieces) fit the enclosed syringe. I used a diabetic syringe I had at home to inject the solution into the printer since I needed something that I could hold at a 90 degree angle.

Product works fine, but the instructions are WEAK! 1. The attachments fit, albeit tightly, so use hot water to soften the hose to attach it to the syringe. 2. The instructions show working on the print head while it's still in the printer. I don't know how one would do that successfully. Look up how to remove the print head from your machine. I have a Canon, so the process is relatively straight forward. I don't know how to do that on other brands of printers, but look online at you tube for how to do it. 3. If you aren't comfortable with the minor disassembly of removing the print head, then maybe you should take your printer to a shop for service.

I installed a brand-new ink cartridge into my printer that I use regularly. For some reason this black ink did not want to print, and I ended up printing blank pages. So, after numerous unsuccessful print head nozzle cleanings and test pages, I bought this cleaning kit. This cleaning kit almost destroyed my printer! First of all, one of the L-shaped pieces was missing from the kit. I'm not sure if they were the same or different sizes. The directions were very vague. They didn't explain what the other nozzle was even for. Was it an extra nozzle for the bottle? Why was it needed? The directions show a broken print pattern to identify which colors need to be cleaned. If your printer looks like this, do a print head cleaning through your printer or print an ink purge page first. Only use this liquid cleaning solution as your last resort, when you continuously get broken lines after numerous print head cleanings and a couple of purge pages. The directions state to "inhale" 4-5ml of cleaning solution into the syringe. But, they only want you to inject 1ml into the ink inlet that needs to be cleaned. That isn't enough to flush out the line, so you're left with cleaning solution and now diluted ink in the tubing. Other online videos using liquid cleaning solutions say to use 4-6ml per color to flush out the lines. And, you should probably wait at least 24 hours before attempting to print anything. Of course, the lines are going to be full of clear cleaning fluid, so it will take some time before ink flows through the tubes again. So, it's no surprise that people complain that they print out blank pages after using this cleaning solution. That's exactly what happened to me! But, the directions show a perfectly printed test pattern right after injecting the solution. BTW, the QR code at the bottom of the instruction manual is the same manual but in digital form. The yellow rubber piece did not fit into the ink inlet of my Brother MFC-J6925DW printer very well. I had to hold it on using needle-nose pliers. The directions don't clearly explain that you must remove the syringe as you're pushing in otherwise, when you remove the apparatus ink will get sucked back into the syringe so you must flush it out before using it for another color. Also, if you allow ink to get sucked back into the syringe, ink is going to spill out of where you attached the rubber piece to the inlet, leaving a mess. This happened to me multiple times. The directions have you wait an hour, then print a test pattern. If that doesn't work, then try again 2-3 more times. If that doesn't work, wait and try again the next day. Why? Instead of trying 2-3 times and wasting 2-3 hours, just flush each clogged line slowly with 4-5ml of fluid to completely flush out the line. Then, wait to do a test print 24 hours later. Otherwise, you’re going to get air bubbles in the tubing. Instead of just flushing out the clogged black tubing, I ended up flushing out the tubing for all the colors, too. Big mistake. I printed numerous blank pages. This whole ordeal wasted several hours. I did some research so I didn’t have to trash my expensive printer. I searched my printer model number and “printhead purge.” I found a YT video describing how to go into a special setting on my brother MFC printer to purge the ink better than the original default settings. You can manually do it per ink color. Low and behold it worked, but it wasted a lot of ink. At least 3 days later I was able to salvage my printer, no thanks to this cleaning solution and the vague instructions. My advice is to use this at your own risk and only if absolutely necessary to clear a blocked ink cartridge. Do some research online and watch videos of people using similar cleaning solutions.

100% work product super quality

منتج ممتاز جدا (اشكر البائع)

After i didn’t use my printer for couple of days , it wasn’t able to print in colors and black. I tried to fix the problem by deep cleaning option but it didn’t fix the problem at all. I decided to buy this kit and thankfully i did. I followed Youtube videos tutorial and finally the problem is resolved. I highly recommend this kit if you want to revive and clean printer head.

الجودة