🚗 Light up your path, turn heads, and never blend in.
SUPAREE LED Fog Lights with Halo Ring combine powerful 27W LEDs and dual white/amber halo rings for enhanced daytime running and signaling. Crafted from aviation aluminum with IP68 waterproofing, these fog lights offer over 50,000 hours of reliable performance. Designed as direct OEM replacements for select Tacoma, Tundra, Sequoia, and Solara models, they install easily with included adapter harnesses—delivering superior visibility and style in all weather conditions.
| Brand | SUPAREE |
| Color | White+Amber-Halo ring |
| Specific Uses For Product | Fog Lights |
| Vehicle Service Type | 2007-2013 Tundra, 2008-2015 Sequoia, 2004-2006 Solara, 2005-2011 Tacoma |
| Year | 2005 |
| Special Feature | Waterproof, Dustproof, DOT Approved |
| Wattage | 27 watts |
| Auto Part Position | Front |
| Lens Color | Clear |
| Lens Material | Polycarbonate |
| Assembly Required | No |
| Automotive Fit Type | Universal Fit |
| Manufacturer | SUPAREE |
| Model | Led fog light assembly |
| Item Weight | 2.16 pounds |
| Package Dimensions | 10.39 x 5.71 x 5.24 inches |
| Country of Origin | China |
| Item model number | CL833 |
| Exterior | Painted |
| Manufacturer Part Number | SP-CL833 |
| Special Features | Waterproof, Dustproof, DOT Approved |
J**
Makes your truck stand out
The media could not be loaded. So easy to do and only took me 20 minutes to do. Nice and bright and turn single is so cool. But i highly recommend to buy it!
T**R
2006 Tacoma
Very bright, works well and as advertised. Used them several months on the daily have been through mud and lots of rain held up great so far.
M**S
looks over functionality
I'm going to give 5 stars. not so much for functionality or installation process. but strictly based on appearance. i have the alpha rex LUXX headlights on my 05 tacoma with a custom raptor grilleand these Fog lights look absolutely stunning with this setup. when i use my turn signal my LUXX headlights also turn amber so it's a really nice addition.as for fog light capability... i can't really comment on, as i haven't needed them for any situation yet. vs the factory fogs, there's definitely a difference in appearance. factory's light up everything in front of you vs these, have a focused beam, almost like my LUXXs. it's more of a distinct line across the front so I'm not too sure how much they're effective but honestly, it doesn't matter to me much. i was aiming for look over functionality no question.so that said, great Fog lights imo
R**A
Upgrade your old stock fog lights with these.
These lights rock! They’re bright LED fog lights that fit perfectly. They can be used in unison with the turn signals and emergency flashers in amber color. They can be used as daytime running lights, and the fog light is nice and bright.
1**.
Poorly made/ unresponsive manufacturer
The white switch back stopped working on one side. Checked all the wiring and everything was correct so the problem in the light itself. Requested a replacement from SUPAREE but I have not received any reply.
A**R
NOT PLUG AND PLAY
They work okay but there not plug and play it requires splicing into existing wires
J**N
Would have been a 5 star but lack of complete instructions and the + and - wires are reversed.
Installed these on my 2007 Tundra, they look and perform great!Things to know:1. For the 07 Tundra removing the old fog light was not described well. The retaining clips are on the right and left side and you can insert you hand and release one side and then the other. You will also have to release the retainer for the adjustment screw pressing in on the small clips. Once all three connecting points are free (as well as the wiring plug) the old fog light will slide out to the front.2. The + and - on the new fog light were reversed. You can resolve by turning the connector over and inserting, but there will not be a clip holding it in place. Wasted some time trying to figure out why they wouldn't turn on... The friction is holding fine but recommend electrical tape or a small zip tie.3. I needed additional wire and connectors to connect the orange and white halos. Not much but it was needed.4. Tap into the daytime running light positive wire, I used a volt meter to id the correct wire, and connect to the fog light blue wire.5. I chose to tap into the side marker positive wire, use a volt meter to id the correct wire, and connect to the green wire. You will need to remove the head light fixture to do this, be careful when removing the panel just below the head lights, it is easy to break the insertion pins. I did break them off on one side and used double sided 3M tape to secure when reinstalling, new panels are expensive. And yes the securing push pins will likely break as well so have some on hand. I have aftermarket head lights so the side marker was my best choice. If you can find another wire that provides 12v when the parking lights are turned on that would be a better option.6. The push clips for the wheel well cover that has to be removed will break on an older Tundra. Have spares on hand for when you reinstall.7. Check and adjust the fog light angles with the adjustment screw before installing the wheel well covers. It makes a big difference when they are adjusted correctly.With the wiring connection above the orange halos will be on whenever you only have DRLs (lights turned off) and they will blink in sync with your orange (also DRL) blinkers. This provides an all-orange DRL and blinker configuration during the daytime.When you turn on your parking lights, or head lights, the orange halos go off and the white ones turn on providing an all-white front lighting except when you use your turn signal. The halo will blink orange in sync with your current blinker.Hope this helps with your install.
C**.
Pretty good set for price.
They function well and since my OEM gigs had yellowed over they were not as good as they should. The price was affordable and looked to be bright so I ordered them. They are not as bright as I would like, but they function fine for in the city. The Halo connections on my order were mirrored. The color coding for the driver's side wrong but I figured it out. I love the Halo driving since I have them hooked to my headlights so they turn on when the lights are on. When I use my turn signal the white Halo gets switched to the yellow Halo to be used as an additional turn signal. LOVE it! When you have crappy drivers any additional lights that others can see is well worth it for a safety point. I want people to see the front of my Toyota Tacoma so they know what I am doing and where I am going. The dogs could be brighter, but I will forgive that because of the function of the Halos.
