Comgrow 3D Printer Enclosure Fireproof and Dustproof Tent for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1, Constant Temperature Protective 3D Printer Cover Room Storage 24.21x20.27x29.53inches

As the title states! This is one of few large enclosures I could find on amazon and it's a perfect fit for my Sovol SV06 Plus 3d Printer. The Sovol Drybox even fits next to it too. I used a printed 120mm fan to 100mm pipe adapter for exhaust and the 100mm pipe side was a perfect fit for the hole at the back of the enclosure. When exhausting, the tent does suck in a bit, so the way I have mine positioned, the tent slightly touches the gantry side where the X axis motor is, but it doesnt interfere or cause friction in any way, and I live with it so that my drybox can sit comfortably on the opposite side with about half an inch clearance between the box and the gantry belt tension knob. The heated bed cable also lightly pushes on the back tent wall, but not in any kind of bad way that could cause a problem. The ceiling gives plenty of room to leave the spool holder with a spool on top, and Ive even stuck a smart bulb through the top velcro flap and closed the flap, gaffer taped the bulb socket cable to the tent, and let the cable hang off the back; this being said to show how well the frame holds the tent and how thick the matetial is. It's well made. Keep in mind though, the SV06 Plus is a fairly large sized printer but being a bed slinger and having the spool holder on top, it takes up more space than it seems. The result is, this enclosure is deceptively HUGE. I don't mind, I expected it to be big but you don't realize just how big until you see it for yourself lol. You may or may not mind, but it's something to remember. The frame is also magentic, which I love because I bought some cheap USB LED bars to go inside to add more light and they magnetized to the frame, so that was a nice surprise! I only wish they had a model that had an acrylic window safely attached to this kind of tent material instead of the soft transparent plastic material that is used. It works to just check in, but if Im diagnosing something during a print and need to see fine detail, I need to open the flap and stick my head in. Not a big deal but would be great to have. This review would have saved me a bunch of time, research, and trial and error if someone had left it before me lol so I really hope this helps someone out!

Assembly was a tiny bit tricky as it's a tight fit, but with some extra hands from another person it was easy. 3D printer fits inside perfectly with a bit of extra room on each side. Keeps the heat in wonderfully and I love that you can unzip it all the way up and the Velcro that holds the door open is a great touch. Definitely a great purchase, I would recommend it. Our cats even climb on it from time to time to take a nap on the top and it doesn't cave in or topple over, it's nice and sturdy.

I was going to build an enclosure but after pricing out the materials it was going to be somewhat expensive. Decided to go with this instead and glad I did! It is the size small unit and as you can see from the pic it fits the unit perfectly with room to spare above. For the cost of this you can't go wrong, and I have already seen a difference in my print quality. If you're debating it, just do it, wish I got one sooner. When assembling the unit use a tiny amount of dish soap on the ends that go into the corner pieces. Just a little bit on your finger and smear the end of the pole and they slide right in. It took me about 10 minutes to assemble and it does have some places to pass your cables through sealed with Velcro so it keeps the heat in and the drafts out. This unit also uses metal poles vs plastic so it won't eventually sag on you.

Bought this enclosure for all 3 of its properties; soundproof, fireproof, and temperature stability. Fireproof: Yet to test, and hopefully never. However it seems sturdy. The vinyl window seems to be the only flaw for "fireproof". Have a smart smoke/co2 detected in the enclosure that will shut off power and text me if alarmed. Temperature Stability: I get really cold winters and hot summers so I wanted to keep the temperature stable and not leak heat into my studio. So far it's kept the Temps stable and works as expected. Soundproof: It clearly dampens the sound that eminates from my Ender 3 Pro. I have made no hardware changes to reduce sound (yet) and it drastically reduced noise. However it still can be heard. So keep that in mind. I have it in a studio which makes it hard to sleep, however I run a fan and with this enclosure I don't hear it. There are two downsides. If you have any upgrades that change the width of your printer (like a side mounted spool) it will not fit. Secondly the outside of the enclosed has a sticky residue that WILL be a magnet to any pet hair. I don't have pets but it has ready collected slight dust. Overall I would recommend

I use the grow tent for 3D printing to help block sun and keep smell. Works like a charm, it’s very durable been using for quite some time and zippers don’t snag or get caught. The size is absolutely on point for my printer. Was easy to put together took all of 5min.

I wanted to enclose my Ender 3 S1. I only print PLA or PETG, but the printer sits next to me in my work space, and I've started being concerned about particulates generated during the printing process. This Comgrow small enclosure is an inexpensive way to hopefully contain those particulates. The Ender 3 S1 fits fine in the small size even with the filament spool mounted on top. See the pics. There's enough room inside for me to put a recirculating filter in one of the back corners. I just did a test print and my PETG parameters don't seem to have changed after putting the printer in there. Also, this fits fine on the Lack coffee table (not the smaller end table). I got the Creality LED light since I knew it would be dark in there. The product dimensions listed by amazon (25"D x 29.53"W x 21.06"H) have the Width and the Height swapped. It's actually 29.5" high.

Ich habe das 3D-Druckergehäuse von Comgrow in der Größe M für meinen Creality Ender3-S1 Drucker gekauft. Meine Anforderungen waren: 1. Der Drucker muss in das Gehäuse passen 2. Bessere Druckqualität durch gleichmäßige Umgebungsbedingungen 3. Keine Geruchsbelästigung (durch Drucker und Gehäusematerial) 4. Einfache Montage und Demontage 5. Reduktion der Druckgeräusche 6. Preis 7. Verbesserungen Meine Erfahrungen: 1. Der Drucker muss in das Gehäuse passen Das Gehäuse ist groß genug, damit der Drucker samt Filamentrolle hinein passt. An der Vorderseite gibt es ein großes Sichtfenster, dadurch lässt sich der Drucker während dem Druckvorgang beibachten. Die große Klappe lässt sich mit einem Reisverschluss mit zwei Zippern schließen. An den Seiten und der Rückwand sind Öffnungen, um Kabel heraus zu führen. Diese sind per Klettverschluss zu schließen. Das Material ist aus einer Art Gummi-Kunststoff und macht einen wertigen Eindruck. Das Gestänge ist stabil und halät sehr gut. An der rechten Seite befinden sich drei kleine Taschen, in die man Werkzeug (Zange, Spatel, use.) unterbringen kann. Leider sind diese Taschen recht hoch, sodass das Werkzeug immer wieder mal komplett in der Tasche verschwindet. Das Meterial ist schwer entflammbar, das habe ich (zum Glück) noch nicht getestet. Durch die Einhausung staubt der Drucker auch weniger ein. Alles in Allem bin ich mit der Verarbeitung sehr zufrieden. 2. Bessere Druckqualität durch gleichmäßige Umgebungsbedingungen Bisher drucke ich nur PLA / PLA+ von verschiedenen Herstellern. Immer wieder hatte ich Probleme mit Luftzug und Luftfeuchtigkeit. Diese konnte ich mit dem Gehäuse weitestgehend eliminieren. Die Oberfläche wird deutlich glatter und gleichmäßiger. Der Unterschied war deutlich spürbar, als ich während des Drucks der Letzten Schicht die Klappe geöffnet habe. Die Oberfläche wurde deutlich rauher und ungleichmäßiger. Der Innenraum heizt sich auf über 10°C mehr als die Umgebungstemperatur auf (gemessen am Boden). Entsprechend sinkt die relative Luftfeuchte auf 25-30% ab (mithilfe eines Kästchens mir Silicagel). 3. Keine Geruchsbelästigung (durch Drucker und Gehäusematerial) Da ich nur PLA drucke, ist mir noch keine Belästigung durch den Drucker aufgefallen. Das Material der Hülle ist Gummi-artig und hatte beum Auspacken einen leichten Geruch, der aber nach eun paar Stunden verflogen war. 4. Einfache Montage und Demontage Die Konstruktion ähnelt einem Zeltaufbau. Die Anleitung ist gut bebildert. Wenn man strukturiert vorgeht, ist der Aufbau schnell erledigt. Eine Demontage ist möglich, wurde von mir aber nicht durchgeführt. 5. Reduktion der Druckgeräusche Leider hat das Gehäuse keinen Effekt auf die Lautstärke des Druckers. 6. Preis Mit etwa 50€ bin ich mit dem Preis sehr zufrieden. 7. Verbesserungen Im Innenraum habe ich ein Kästchen mir Silicagel, dadurch ist die Luftfeuchte kein Problem mehr und immer im niedrigen Bereich. Zusätzlich habe ich eine Set günstiger LED- Streifen (<10€) gekauft und im Innenraum befestigt, damit eine Gute Beleuchtung erreicht wird. Der OktoPi ist mittels USB Kabel außerhalb des Gehäuses untergebracht, da mir die Temperatur im inneren für einen Dauerbetrieb zu hoch ist. Fazit: Das 3D Drucker Gehäuse ist für mich eine sinnvolle Investition, da es selbst bei PLA-Drucken ein paar Fehlerquellen minimiert. Das Preis-Leistungsverhältnis würde ich aufgrund der sehr guten Verarbeitung und Materialqualität mit Hervorragend einschätzen.

After 3 different enclosures, including the official Creality unit for the Ender 3 S1, this is the one you need! Only one complaint, it’s stinky, the rubbery fabric smells like a tent but it is does fade some within a couple weeks. Would be 5 stars if it didn’t smell.

) estoy muy feliz con el producto

Luckily I have the room for it and have built a dedicated table for it. This is massive, but for me its worked out really well as My Ender 3V2 is heavily modified. and its given me the room inside the tent to accommodate all my mods, custom top mounted spool holder for direct drive, keyboard for octoprint my printers rarely off so its also allowed me to store all my PETG inside at 35'c 22% humidity, which is what my tent seems to levels out at when in use and zipped up. The window takes a while for the creases to fall out, but they will making the window much easier to see through. Its very easy to assemble, the quality of mine is very good, all stitching and zips are well constructed in the right places of corners. It has created a stable temperature printing environment, has also helped me to prevent some corner lift/warping on large surface area, longer printing models as i print in PETG Nylon and CF filaments.

Di facile montaggio e molto capiente (una elegoo Neptune 4 pro entra benissimo anche con bobina e porta filamenti agganciati in cima). Il tempo dirà se le cuciture e le cerniere sono di buona qualità ma sembra un prodotto concepito con criterio. Volevo comprare un enclosure della sunlu ma alla fine ho optato per questa perchè più compatta e soprattutto perché ha il telaio in alluminio. Non conoscevo il brand ma informandomi ho scoperto che fanno diversi prodotti per il settore quindi sono fiducioso sulla sua resa.