VCELINK Punch Down Impact Tool with 110 and 66 Blades, Network Wire Punch Down Impact Tool Kit, Keystone Impact Terminal Insertion Tools, Network Cable CAT6A/CAT6/CAT5/CAT3 Stripper

I picked up this punch-down impact tool for some home networking projects, and it has worked perfectly so far. The build quality feels solid, and the impact mechanism works smoothly to seat wires properly without requiring excessive force. The tool comes with both 110 and 66 blades, making it versatile for different networking setups. The blades lock in securely and are easy to swap out when needed. I’ve used it on keystone jacks and patch panels, and every punch has been clean and precise with no loose connections. The built-in blade also cuts excess wire cleanly, which is a nice touch. For the price, this is an excellent value—it performs just as well as more expensive tools I’ve used in the past. If you're setting up or maintaining a home or office network, this is a great tool to have in your kit. Would definitely recommend!

Easy to use. Multiple sizes. Durable construction. Works well after daily use

This produce provides punch down for both type 66 and type 110 connection boxes. It is each to change heads, and use on creating connections. A cutter for wires is also included. There was some problem with removing the head, but the company provided help in making this work better; they did spend a good deal of time helping me.

This thing kicks ass. Used mine intensely on the job for a year and a half before the spring started to give me issues. Unbeatable for the price.

Great little tool for the price. Seller had fast shipping, the punchdown works fine. Yep id buy again but its built to last.

This punch will not cut off the ends on Levitron and Commscope jacks. I end up having to use a blade. Low doesn’t bare the wire and high cuts it about 50% Too bad though because Kleins and Flukes are so pricey. Guess you get what you pay for.

I use this a few times a month and for the past few years it has work just as good as the higher end ones. The only problem I have with it is the two little pick tools on the sides kinda dont stay in all the time and since I dont use my at all I just taped them in.

So I used this punch down tool for less then a day and the blade broke in the center of it so it no longer punches the wires down in-between the metal barbs and seats it anywhere close to what it's supposed to. I emailed Vcelink about getting a new blade and have yet to hear anything back from them. Unfortunately I will need to go buy another punch down tool seeing that I do low voltage and network wiring for a living and need the tool on a regular basis. Guess I'll have to pony up and buy a more expensive hopefully better quality tool.

Estoy encantado no le tenia mucha fe pero me anime y que sorpresa me lleve es de muy buen material se ve resistente ya lo e usado en varias instalaciones y todo perfecto, creo es una herramienta que por lo que tiene es si o si traerlo de cajón

Solid tool which works great and comes with a very handy cable stripper. I watched their YouTube product video showing how to punch down a cable and I was on my way. Saved me having to pay someone to come and do my connections.

El impacto es muy bueno ,queda el cable bien ponchado a la primera, la recomiendo bastante, y el material es de alta calidad 👌

[UPDATED] Upgraded to 5 stars! After using it more and now paying attention to assure that the spring tension is low when using on Keystone blocks and making sure to slightly tilt it to its blade-cutting side, it works rather well. However, I have noticed that often, while it punches down ok, it often does not cut the wire off as it's supposed to. This isn't a deal breaker as I carry tiny side cutters, very sharp, to get its point down to where the wires are. For the price, it's good enough. ________________ original review below ________________ This does work, but even with the spring tension set to high It still requires a lot of pressure to get it to snap. On lighter Keystone jacks, like those inside those wall-surface-mount types, the pressure is so strong that it could crack the PCB that the keystone jack is soldered to. With those, I just started using one of those little plastic punches. For bigger jobs, like with BIX blocks, it's probably perfect. Still, good tool, just be careful with spring tension. Also, keep checking the tension knob, because I've found that after some punches, it seems to flip itself back to the stronger setting.

It's convenient tool for working with different keystone. I hope, will work long time