26390 Screwdriver Set, Hex Metric With Precision Handle, .7 - 3.0mm, 7 Piece, original version, one size

I use these everyday. Very well made and durable.

Best quality you can get. If you work with screws as small as these fit you need tools that do not round out and fit precisely the hex. I have cheaper versions of this and they do not fit as well as these do. So spend the extra and enjoy these for years . I bought mine so I would have them handy for small RC cars and the like.

I decided to go with these because of the Wiha name- have heard good things about this brand. I had a set of Bondhus drivers that have lasted almost 5 years, but my 1.5mm driver is wearing out (which has a ball end). I decided to buy this kit. These seem to be better quality over the Bondhus in terms of the metal on the driver, and how they are connected to the main body. I don't think the Wiha's will wear as quickly, since they are solid all the way down. I also like that it has a rotating end, very nice to be able to twist the end to tighten. I use these primarily for my electronics projects, drones, and 3d printers. I definitely recommend these. They are a tad more than the Bondhus but I believe they are worth the extra.

This Wiha hex metric set exhibits superior quality and durability. The ergonomic handle design is well-suited to the various sizes included in the kit. This is a worthwhile investment.

Not a bad set. Sturdy and well made. Certainly better made and longer lasting (in my opinion and experience) than anything I might order from, say, China (note: some things made in in China CAN be of exceptional quality. Tools are usually not one of them). I was a bit disappointed, however, when the 1.5mm started to round off a bit after only moderate use. I had to repair an older RF spectrum analyzer, circa 1990s. The front-panel, hard plastic control knobs of the analyzer slip over steel control rods (protruding about an inch or so from the front face of the analyzer), and are fastened/tightened into place and onto the rods via steel set screw/hex screws within the knobs. After attaching about five or six control knobs and tightening the brand-new, steel set screws with "moderate" force (roughly estimated, somewhere between 15-25 inch-pounds), the 1.5mm driver was starting to slip a bit on around the sixth knob/screw. The 1.3mm, which was also use throughout the job, seemed to hold up pretty well.

Why did you pick this product vs others?: I think Wiha is the best brand for the normal person that wants slightly higher quality, small hand tools than something like Craftsman or Kobalt, etc. They're not quite Wera levels of nice, but they're also not Wera expensive either. I think Wiha leverages fabrication sites around the world, so the manufacturing costs are less, but they're still very nice. I can't conspicuously flaunt them like I do my Wera stuff, but they work great. Also, the Wiha customer service/warranty is really good. I had a small ratchet from them that malfunctioned, and I emailed them about it. They said, "do you have a photo of the item and the receipt (e-receipt is what I had, so I screenshot it)?" I did, sent it to them, and they sent me a brand new ratchet. No other questions asked.

This is my second set of these. I do much of my work with smaller hex head screws so I can either use a hex-bit and a power tool which usually ends up with a stripped screw, head or a complete break, or I can hand tighten for more precision. These appear to be perfectly machined, and there is almost no flex in the metal. They are very tightly machined, and don't seem to dull out (my first set is still working perfectly after using them on thousands of screws). I bought the second set just to have another set handy at my other work bench. I suppose the price could be cheaper... but factor that higher cost with almost no replacement cost due to failure.

Worth the extra cost.

Much better than the dodgy allen keys you get with the vape products you buy!

Item.looks good but does not fit according to the sized mentioned

Works like they should and am happy with the quality

Compré este juego de desarmados para poder darle mantenimiento a mi Traxxas TRX4 y son absolutamente indispensables. Su punta NO se barre, tiene excelente grip y su largo y mando los hacen cómodos para poder trabajar con ellos por horas. Si has montado un rin de beadlocks de 1.9 pulgadas con 24 tornillos por lado SIN estos desarmadores, eres un Dios, por que con estos es pan comido.

Great quality you expect from Wiha.