CZYYDice Tower with Tray Wood Laser Etched Mind Flayer Portable and Collapsible Dice Roller Perfect for Board Game and Tabletop RPG (Cthulhu)

I just built this dice tower with my 9yo and the assembly is part of the fun! It’s fairly easy to assemble; the hardest part is just lining up and driving in the tiny little screws into the wood. But once that’s done, it’s quite sturdy. The details on the dice tower are really neat. And it does a great job at rolling your dice. I probably wouldn’t trust the tower to roll metal dice but that’s a minor detail. I was surprised to see a little wooden Druid figure as well that is included with the tower. Some of the pieces were a little bent but once it was assembled, the pieces straightened out nicely. A really great dice tower for the value. I highly recommend.

Ok, let's start by saying this is the second dice tower I've purchased off ebay. The first one was utter garbage. A flimsy cardboard piece of junk from a different seller.This one froom CZYY-Store was pretty awesome.I was a little leary when the tiny box arrived, and everything lay flat. Small pieces stacked on small pieces.Once I pulled the pieces out, I was relieved to find some fairly sturdy little planks with tiny holes where the screws were meant to go. The instructions were a little lackluster and definitely were not a step by step, buuuut, putting the thing together was still fairly straight forward.Once I fully assembled this dice tower (while playing Call of Cthulu), we immediately started using and and noticed a hug difference in our dice rolls. Now, bear in mind this is luck based, but I went from having the most horrible rolls and epic fails to having some of the most amazing successes. In fact, I received a penalty die for an action, rolled, and with the penalty die, still rolled 2% which was an extreme success!The tower itself is visually appealing and well detailed. It's fairly sturdy, though the planks are fairly thin. It was able to handle heavier dice without falling.I would highly recommend this tower to anyone looking for one!

Like other reviews have stated, some of the drilled screw holes are not well aligned, and some are drilled quite close to the outer surface of the panel where the etching is. This is thin wood too. All that said, if care and some precision is practiced while putting this together, it very much *will* assemble without too much trouble and without damaging the outer decoration much - if at all.Once assembled, it works as advertised. Here's my pros and cons:Pros:* Assembly isn't difficult* Seems sturdy once built* Dice roll through without issue* Small, so it doesn't take much space.Cons:* Small, so you're not going to dump 20 d6 down it in one go. 10 d6 is ok though, in my experience.* It's wooden, so it's a little noisy.* Positioning of pre-drilled screw holesOverall I'd buy this again for myself or as a gift. It's not perfect, but it's not super expensive and gets the job done while looking kinda cool.

Great purchase! Nice addition to my board game components. I use a 16 mm dice and it is perfect for it. I think larger dice might also fit. Assembling the pieces together was easy and there is a sense of satisfaction in doing so. Go for it, totally worth the money.

Got this for my hub (our DM) for Fathers Day.This was amazing to put together. They had all the parts labeled, tools came with it... Even a file to fix pieces that might be a little sticky! Yes the screws are insanely small and I wish the screwdriver was magnetic (hint - I used a magnetic one from a PC repair kit). But otherwise the instructions are very detailed, in color, easy to follow. I plan to paint it later as well but it still looks amazing as is though. And they included the little figurine as a feee gift!! Will buy from again!! Great quality... Their DM screen is also amazing too!

So I purchased this as well as having previously purchased their castle dice tray. This tower is smaller than it appears. But still large enough for loreal dice. It is much harder to put together than the dice tray (requires clamps to hold together while inserting many tiny screws). It is also a 2 peice design. The tower totally detached from the base, it does not fold or swivel down for storage. The front bottom of the tower piece is held together only by tension (no screws there) and is prone to break or come apart. I had to glue the front of the tower, a minor modification. Comes with a free cartoony looking sorcerer mini. Tower Looks nice, it works.

If I had one complaint then it would be that I wish the tower was half an inch to an inch wider, but otherwise this is such a great value. We played Zombicide over the weekend and had no issues with some players dropping six regular D6 dice in the tower at one time and having them all roll out without issue.I went back and forth for several days researching and trying to find a good dice tower that wasn't overpriced. It's hard to pull the trigger on paying $50 for pieces of plexiglass glued together, or $30 for a tower that only has a couple of alternating ramps to rotate the dice. I wanted a tower that had at least 3 internal ramps before hitting the final ramp. I felt that this would provide the best starting point for randomizing the dice the best.I had looked at this tower from CZYY a few times before finally pulling the trigger and deciding to give it a try. Assembly wasn't too difficult. There were some snug fits and I think I remember having to lightly trim one connector to a beveled edge for easier entry, but overall it went together without issue. I didn't glue it together, though I had considered doing that. After seeing how it held up this past weekend I'm not even sure if it needs glue reinforcement. I really don't think the itty-bitty screws are doing that much... the threads are so tiny that I seriously question whether they're holding the wood together at all. But, the fit of the interlocking connectors is tight enough that everything seems to stay well enough in place through friction alone.For the price, this tower is hard to beat compared to all the pricier options. Like I said.. I do wish it was a little bit wider, but so far the smaller interior size hasn't seemed to affect performance at all.

Bought two of these for some of my players for a secret santa at our D&D game. They absolutely loved it. Took a little less than 5mins to put together and they were enjoying it immensely. Looks really cool and its nice that they provided all the tools required to put it together.

Die Einzelteile sind präzise gearbeitet und lassen sich problemlos aus dem Trägerbrett lösen. Es ist sicher von Vorteil, die Einzelteile nicht nur zu schrauben, sondern am besten vorab mit Holzleim zusammen zu kleben. Wem das Aussehen (so wie mir) zu langweilig ist, kann natürlich die Einzelteile vorab bemalen. Ich habe dazu Aquarellfarben verwendet da man mit diesen auch gut schattieren kann. Durch die mit Laser eingebrannten Strukturen kommt es auch zu keinem ungwünschtem Vermischen der Farben bei abzugrenzenden Bereichen (das ist sonst auf Holz immer auf Grund der Saugfähigkeit der Obefläche ein Problem). Der Turm funktioniert auch mit mehreren Würfeln perfekt und wird sicher bald bei der nächsten RPG-Runde eingeweiht.

Tal vez el precio podria considerarse un poco alto, sin embargo es de buen tamaño, tematico y visual, practico para juegos de dados y no ocupa mucho espacio.Lo unico malo es que funciona para dados pequeños y estandar (D&D y similares) sin embargo para dados grandes (King od NY Anubis) ya no funciona, pero estoy satisfecho con el producto.

Grace a cette tour les dés ne viennent plus renverser les objets sur le plateau de jeu.Très pratique car elle ne prends pas trop de place.Facile à monter grâce au plan, les vis sont très petites, le tournevis est inclus.Je recommande

Smaller than expected but lovely product.