Pro-Bond Tire Glue : desertcart.in: Home & Kitchen Review: First off, it is better to buy unglued tires and rims. It’s way cheaper in the long run and if you learn to glue it right, they stay glued forever. Pre-glued tires come unglued more often than the ones I have glued myself. Eventually your pre-glued tires will become unglued and you’ll need to buy tire glue anyway! Secondly, any old normal CA glue will technically work as tire glue. This glue is just slight better formulated and it much easier to apply. However, this is great bottle and tip. My favorite actually! I would have purchased this off of amain.com, but I found it here for cheaper. The glue works very well for me and I haven’t had any issues with my tires and rims. It is a good idea to wash your tires and rims with simple green(I find simple green to be the best agent for this application) before glueing your tires to the rim. Also, check over your tire bead to make sure there are no protrusions that would hinder the glue bonding to the rim uniformly. It is better for your tire bead to have a notch cut out of it than to have a tiny molding line stick out passed the normal bead. Lastly, get some tire bands or a handful of normal rubber bands and place them around the tire while it dries. The included tips are very useful. They are actually RPM tips and can be bought separately in a pack if you severely clog them. A good way to avoid clogging your tips is to just keep a needle inside or around the tip wherever you store it. After you use the glue, keep the tip on it for a second and hold it up right. Squeeze a little air through the tip while it is wet. Then, remove the tip and close the bottle of glue(preferably, store the glue bottle in a cold place to preserve the glue). After the tip has been removed run a needle or something small through it before storing the tip. As a last resort if the tip is clogged you can cut the tip down to an open point. Its not all that big of a deal, but I am still on the first tip after glueing dozens of tires. I really like this glue. Not the first nor last time I purchase this glue and tip combo. Highly recommend. Review: Der beste Reifenkleber den ich bisher hatte, flüssig wie Wasser und hat leider etwas zu wenig neue Spitzen zum tauschen. Dampft nicht aus wie Sekunden Kleber und hinterlässt keine Rückstände. Handschuhe sind zu empfehlen- auf der Haut sehr schmerzhaft.
| ASIN | B00AE7VA5S |
| Assembly Required | No |
| Automotive Fit Type | Universal Fit |
| Batteries | 1 Nonstandard Battery batteries required. |
| Best Sellers Rank | #1,503,953 in Home & Kitchen ( See Top 100 in Home & Kitchen ) #1,328 in Art Glues |
| Brand | Pro-Line |
| Colour | clear |
| Construction Type | Radial |
| Country of Origin | USA |
| Customer Reviews | 4.7 4.7 out of 5 stars (1,590) |
| Date First Available | 19 December 2012 |
| Global Trade Identification Number | 00675118159676 |
| Item Weight | 30 g |
| Item model number | PRO603100 |
| Manufacturer Part Number | PRO603100 |
| Section Width | 3 Inches |
| Size | medium |
| Tire Diameter | 16 inches |
| UPC | 675118159676 |
| Vehicle Tire ISO Metric Size Description | 16/16R16 |
S**A
First off, it is better to buy unglued tires and rims. It’s way cheaper in the long run and if you learn to glue it right, they stay glued forever. Pre-glued tires come unglued more often than the ones I have glued myself. Eventually your pre-glued tires will become unglued and you’ll need to buy tire glue anyway! Secondly, any old normal CA glue will technically work as tire glue. This glue is just slight better formulated and it much easier to apply. However, this is great bottle and tip. My favorite actually! I would have purchased this off of amain.com, but I found it here for cheaper. The glue works very well for me and I haven’t had any issues with my tires and rims. It is a good idea to wash your tires and rims with simple green(I find simple green to be the best agent for this application) before glueing your tires to the rim. Also, check over your tire bead to make sure there are no protrusions that would hinder the glue bonding to the rim uniformly. It is better for your tire bead to have a notch cut out of it than to have a tiny molding line stick out passed the normal bead. Lastly, get some tire bands or a handful of normal rubber bands and place them around the tire while it dries. The included tips are very useful. They are actually RPM tips and can be bought separately in a pack if you severely clog them. A good way to avoid clogging your tips is to just keep a needle inside or around the tip wherever you store it. After you use the glue, keep the tip on it for a second and hold it up right. Squeeze a little air through the tip while it is wet. Then, remove the tip and close the bottle of glue(preferably, store the glue bottle in a cold place to preserve the glue). After the tip has been removed run a needle or something small through it before storing the tip. As a last resort if the tip is clogged you can cut the tip down to an open point. Its not all that big of a deal, but I am still on the first tip after glueing dozens of tires. I really like this glue. Not the first nor last time I purchase this glue and tip combo. Highly recommend.
M**H
Der beste Reifenkleber den ich bisher hatte, flüssig wie Wasser und hat leider etwas zu wenig neue Spitzen zum tauschen. Dampft nicht aus wie Sekunden Kleber und hinterlässt keine Rückstände. Handschuhe sind zu empfehlen- auf der Haut sehr schmerzhaft.
D**R
Well as per usual proline hits it on the head with this kit 2 applicators and glue simple to use for even the biggest mess makers like myself.. I've used others but never get the exact result I want,BUT! With this kit was perfect and I'll be ordering few more applicators enough for few sets here Not just paying for the name with this stuff
M**X
Easily reusable, good quantity and works flawlessly. Good product.
A**R
5 Sterne.
TrustPilot
1 个月前
1 个月前
